PCE Instruments PCE-GM 75 Manual de usuario

PCE-GM 75 / PCE-GM 80 Gloss Meter

User Manual

User manuals in various languages (français,

italiano, español, português, nederlands, türk, polski,

русский, 中文) can be found by using our

product search on: www.pce-instruments.com

Last change: 28 February 2023

v1.0

English

 
 © PCE Instruments 
 
 
Contents 
1Safety notes........................................................................................... 1 
2Instrument Characteristics ..................................................................2 
3Specifications........................................................................................2 
4Delivery contents .................................................................................. 2 
5Display descriptions............................................................................. 2 
6Operation instructions ......................................................................... 3 
7Menu instructions ................................................................................. 3 
8Modifying the calibration value ...........................................................3 
9Setting the time ..................................................................................... 4 
10 Important notice.................................................................................... 4 
11 Contact................................................................................................... 4 
12 Disposal ................................................................................................. 4 
 
 
 

1 Safety notes

Please read this manual carefully and completely before you usethe device for the first time. The

device may only be used by qualified personnel and repaired by PCE Instruments personnel.

Damage or injuries caused by non-observance of the manual are excluded from our liability and

not covered by our warranty.

•The device must only be used as described inthis instructionmanual. If usedotherwise,

this can cause dangerous situations for the user and damage to the meter.

•The instrument may only be used if the environmental conditions (temperature, relative

humidity, …) are within the ranges stated in the technical specifications. Do not expose

the device to extreme temperatures, direct sunlight, extreme humidity or moisture.

•Do not expose the device to shocks or strong vibrations.

•The case should only be opened by qualified PCE Instruments personnel.

•Never use the instrument when your hands are wet.

•You must not make any technical changes to the device.

•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,

no abrasives or solvents.

•The device must only be used with accessories from PCE Instruments or equivalent.

•Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

•Do not use the instrument in explosive atmospheres.

•The measurement range as stated in the specifications must not be exceeded under

any circumstances.

•Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

2 Instrument Characteristics

•Fine, light, stylish appearance and easy to carry

•Completely intelligenised design, single key operation, convenient to use

•Automatically adjustable

•Capable of measuring from multiple different angles

•Long lifespan lamp

•High measurement precision

•Backlit LCD digital display with accurate battery life and time display

•Auditory feedback during operation

•Automatic shutdown

•USB interface for PC connection

•Stores up to 1245 measurements

3 Specifications

Measurement range

0 ... 99.9 GU

100 ... 1000 GU

Resolution

0.1 GU

1 GU

Repeatability

< 0.45 GU

0.5%

Accuracy

< 1 GU

Measurement geometry

60°

Measuring surface

Ø4.5 mm

Data storage

1,245 measured values

Interface

Micro USB

Power supply

2 x 1.5V AAA batteries

Environmental conditions

0 ... 40°C / 32 ... 313°F, < 85% rh non-condensing

Dimensions

115 x 65 x 25 mm / 4.5 x 2.6 x 1 in

Sensor cable length (PCE-GM 80 only)

approx. 50 cm

Weight

100 g / < 1 lb

Standards

GB9754-88, GB9966.5, ISO2813, JJG696-2002

4 Delivery contents

1 x gloss meter PCE-GM 75 or PCE-GM 80

1 x external sensor (PCE-GM 80 only)

1 x calibration standard

1 x micro USB cable

1 x cleaning cloth

2 x 1.5 V AAA battery

1 x user manual

5 Display descriptions

•“GU” - Gloss Unit

•“calibrate” –Runs the calibration process

•“clear save”- Clears the saved measurements

•“Change CAL” - Modifies the calibration value

•”Set time”–Modifies the time display

6 Operation instructions

Press the button to start the device. The display will now show “Calibrate?” Place the device, with

the measurement window into the calibration slot, in the case of the device and press the button

again to confirm the calibration process. The device now calibrates automatically. Once

calibrated, the display shows “calibrate ok” and then “ready”. The device is now in the working

condition and is ready for use.

(If you choose the skip the calibration process, simply wait ~20 sec. until the display shows

“ready”.)

Now place the device with the measurement window onto the surface you wish to measure and

press the button to begin. With a “beep” the device displays the gloss value of the measured

surface.

The device will shut down automatically after ~50 sec. of not being used.

7 Menu instructions

When the device is ready for use, press and hold the button until the display changes and

“SET/MENU” is highlighted. Release the button to enter the next screen. The display change

looks as follows:

The cursor now cycles (top to bottom) the options of the next menu. Press the button when the

desired option is highlighted in order to select:

8 Modifying the calibration value

If you wish to replace the standard plate (black quartz crystal plate), you must then change the

calibration value. In order to do this, you must press the button when “change CAL” is highlighted

inside the “SET/MENU” screen (refer to picture above). The display now shows “change CAL?”

Press the button again to confirm and begin the process (if no new value is needed, do not press

the button, after ~20 sec. the device will return to the screen displaying “ready”). The device now

begins to count up from 80. Press the button at the desired value to confirm it. The device will

now return to the working condition and display “ready”.

9 Setting the time

If you wish to change the time displayed on the device, press the button when “set time” is

highlighted inside the “SET/MENU” screen (refer to picture in point 7 Menu Instructions). The

highlighted area (beginning with the year) now begins to count up, press the button again to

confirm the desired value. Afterconfirmation, the next value will be highlighted and begin to count

up (month). Repeat the process until you have the desired date and time set.

10 Important notice

•Avoid direct sunlight; otherwise it can affect the measurement accuracy.

•The standard plate should be kept clean. Avoid touching it with your fingers. If there is

dust on the plate, it can affect the measurement accuracy. Wipe it with the provided

cloth or absolute alcohol.

•When the battery level is less than 20%, the batteries need to be replaced. Open the

battery cover and replace the old batteries with new ones. Please note the polarity of

the contact wires.

•The batteries should be replaced when depleted, otherwise long-term storage may

cause liquid to leak out and damage the device. If the device will not be used for a

longer period of time, the batteries should be taken out and kept in a safe place.

11 Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact

us. You will find the relevant contact information at the end of this user manual.

12 Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament

applies. Due to the contained pollutants, batteries must not be disposed of as household waste.

They must be given to collection points designed for that purpose.

In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use

them or give them to a recycling company which disposes of the devices in line with law.

For countries outside the EU, batteries and devices should be disposed of in accordance with

your local waste regulations.

If you have any questions, please contact PCE Instruments.

PCE Instruments contact information

Germany France Spain

PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.

Im Langel 26 23, rue de Strasbourg Calle Mayor, 53

D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete)

Deutschland France España

Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel. : +34 967 543 548

Fax: +49 (0) 2903 976 99 29 Numéro de fax: +33 (0) 972 3537 18 Fax: +34 967 543 542

[email protected] [email protected] [email protected]

www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol

United Kingdom Italy Turkey

PCE Instruments UK Ltd PCE Italia s.r.l. PCE Teknik Cihazları Ltd.Şti.

Unit 11 Southpoint Business Park Via Pesciatina 878 / B-Interno 6 Halkalı Merkez Mah.

Ensign Way, Southampton 55010 Loc. Gragnano Pehlivan Sok. No.6/C

Hampshire Capannori (Lucca) 34303 Küçükçekmece - İstanbul

United Kingdom, SO31 4RF Italia Türkiye

Tel: +44 (0) 2380 98703 0 Telefono: +39 0583 975 114 Tel: 0212 471 11 47

Fax: +44 (0) 2380 98703 9 Fax: +39 0583 974 824 Faks: 0212 705 53 93

[email protected] [email protected] [email protected]

www.pce-instruments.com/english www.pce-instruments.com/italiano www.pce-instruments.com/turkish

The Netherlands United States of America Denmark

PCE Brookhuis B.V. PCE Americas Inc. PCE Instruments Denmark ApS

Institutenweg 15 1201 Jupiter Park Drive, Suite 8 Birk Centerpark 40

7521 PH Enschede Jupiter / Palm Beach 7400 Herning

Nederland 33458 FL Denmark

Telefoon: +31 (0)53 737 01 92 USA Tel.: +45 70 30 53 08

[email protected] Tel: +1 (561) 320-9162 [email protected]

www.pce-instruments.com/dutch Fax: +1 (561) 320-9176 www.pce-instruments.com/dansk

[email protected]

www.pce-instruments.com/us

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de PCE Instruments

PCE Instruments

PCE Instruments PCE-HFX 100 Manual de usuario

PCE Instruments

PCE Instruments PCE-228 Manual de usuario

PCE Instruments

PCE Instruments PCE-HMM Manual de usuario

PCE Instruments

PCE Instruments PCE-PH 25 Manual de usuario

PCE Instruments

PCE Instruments PCE-CL 20 Manual de usuario

PCE Instruments

PCE Instruments PCE-PTR 200N Manual de usuario

PCE Instruments

PCE Instruments TUM 20 Manual de usuario

PCE Instruments

PCE Instruments PCE-CT 24FN Manual de usuario

PCE Instruments

PCE Instruments PCE-DD Series Manual de usuario

PCE Instruments

PCE Instruments PCE-155 Manual de usuario

PCE Instruments

PCE Instruments PCE-900 Manual de usuario

PCE Instruments

PCE Instruments PCE-DC 3 Manual de usuario

PCE Instruments

PCE Instruments PCE-RCM 16 Manual de usuario

PCE Instruments

PCE Instruments RH5 Manual de usuario

PCE Instruments

PCE Instruments PCE-RVI 3 Manual de usuario

PCE Instruments

PCE Instruments PCE-1000N Manual de usuario

PCE Instruments

PCE Instruments PCE-MCM 10 Manual de usuario

PCE Instruments

PCE Instruments PCE-GPA 62 Manual de usuario

PCE Instruments

PCE Instruments PCE-CRM 40 Manual de usuario

PCE Instruments

PCE Instruments MT 850 Manual de usuario

PCE Instruments

PCE Instruments PCE-TCR 200 Manual de usuario

PCE Instruments

PCE Instruments PCE-910 Manual de usuario

PCE Instruments

PCE Instruments PCE-PTH 10 Manual de usuario

PCE Instruments

PCE Instruments PCE-DFG X Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario