PCE Instruments PCE-DC 3 Manual de usuario

Manual

PCE-DC 3 HVAC Meter

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

[email protected]

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

[email protected]

CONTENT

1. FEATURES ...................................................................................................................... 3

2. SPECIFICATIONS ........................................................................................................... 3

3. METER DESCRIPTION ................................................................................................... 3

4. SAFETY INFORMATION ................................................................................................. 4

5. OPERATION .................................................................................................................... 4

6. FLASHLIGHT ................................................................................................................... 4

7. DATA HOLD .................................................................................................................... 4

8. BACKLIGHT DISPLAY .................................................................................................... 5

9. AUTO POWER OFF ......................................................................................................... 5

10. BATTERY REPLACEMENT ............................................................................................ 5

1. Features

• High resolution to 1mA AC

• 3-2/3 digit (2400 count) LCD display

• White LED backlight

• Built-in non-contact AC voltage detector plus flashlight

• Autoranging with auto power off

• 0.7” (18mm) Jaw opening

2. Specifications

z General Specifications

Display 3-2/3 (2400 count) Digit LCD with white LED backlight

Polarity Minus sign ( - ) indicates negative polarity

Current sensor Hall effect sensor type

Overload indication “OL” displayed on the LCD

DCA zero adjust One touch zero key

Display rate 2 readings/second, nominal

Battery Two 1.5V AAA batteries

Low Battery indication “BATT” displayed on the LCD

Auto OFF approx. 7 minutes

Operating conditions 32ºF to 86ºF (0ºC to 30ºC) 90%RH; 86ºF to 104ºF (30ºC to 40ºC) 75%RH; 104ºF to 122ºF

(40ºC to 50ºC) 45%RH

Storage conditions - 14ºF to 140ºF (-30ºC to 60ºC); < 90% Relative Humidity

Altitude Operate at less than 3000 meters

Weight 6.2 oz. (175g) including battery

Dimensions 164 x 65 x 32mm (6.5 x 2.6 x 1.3”) (HXWXD)

Jaw opening 18mm (0.7”)

Standards EN61010-1, EN61010-2-032 Category II 600V, Category III 300V

z Range Specifications

Function Range Resolution Accuracy (of reading)

DC Current

2A 1mA ± (2.8% + 10 digits)

80A 100mA ±(3.0% + 8digits)

AC Current (50/60Hz) 2A 1mA ±(3.0% + 10 digits)

80A 100mA ±(3.0% + 8 digits)

Non-Contact AC Voltage 100VAC to 600VAC 50/60Hz

3. Meter Description

1. Current sense jaw

2. Flashlight button

3. Rotary function switch

4. Data HOLD and Backlight key

5. LCD display

6. Clamp trigger

7. One-touch DCA ZERO key

8. Non-contact AC voltage indicator light

9. Non-contact AC voltage detector probe tip

4. Safety Information

! Caution! Refer to the explanation in this Manual

Double Insulation

This meter has been designed to be safe in use, but the operator must use caution in its operation. The rules

listed below should be carefully followed for safe operation.

1. NEVER apply voltage or current to the meter that exceeds the specified maximum:

2. USE EXTREME CAUTION when working with voltages greater than 25VAC rms. These voltages are

considerd a shock hazard.

3. NEVER operate the meter unless the back co ver and t he battery/fuse door are in place and fastened

securely

Input Limits

Function Maximum Input

AC Current 80A

DC Current ±80A

5. Operation

AC Current Measurements

1) Set the Function switch to the ACA range.

2) Press the jaw trigger and clamp around, fully enclosing a single conductor.

3) Do not allow a gap between the two halves of the jaw.

4) Refer to the diagram at right for the correct way to enclose a single conductor.

5) Read the ACA value on the LCD.

DC Current Measurements

1) Set the Function switch to the DCA range.

2) Press the ZERO key to null the meter display.

3) Press the Trigger to open the current sense Jaw.

4) Fully enclose the conductor to be measured.

5) Do not allow a gap between the two halves of the jaw.

6) Read the DCA value on the LCD.

Non-Contact AC Voltage Measurements

1) Touch the probe tip to the hot conductor or insert into the hot side of the electrical outlet.

2) If AC voltage is present, the detector light will illuminate.

NOTE: The conductors in electrical cord sets are of ten twisted. For b est results, rub th e probe tip alo ng a

length of the cord to assure placing the tip in close proximity to the live conductor.

NOTE: The detector is d esigned with high sen sitivity. Static electricity or other so urces of energy may

randomly trip the sensor. This is normal operation

6. Flashlight

Press and hold the top button to turn the flashlight on. Release the button to turn the flashlight off.

7. Data Hold

To freeze the current reading on the LCD, press the “Hold Backlight” key. The word HOLD will appear on the

LCD while the meter is in the Data Hold mode. To release the Data Hold function and return the meter to normal

operation, press the “Hold Backlight” key again. The word HOLD will switch off.

WARNING: Risk of Electrocution. Before use, always test the Voltage

Detector on a known live circuit to verify proper operation

8. Backlight display

Press and hold the “Hold Backlight” key for more than 2 seconds to turn on the backlight. This will also activate

the Data Hold function. To release the Data Hold function and return the meter to normal o peration, press the

Data Hold key momentarily. To turn off the backlight, press and hold the “Hold Backlight” key for more than 2

seconds

9. AUTO POWER OFF

The auto off feature will turn the meter off after 7 minutes.

10. Battery Replacement

1) When the low battery symbol appears on the LCD the batteries must be replaced.

2) Power down and remove the rear battery compartment Phillips screw.

3) Lift off the battery compartment cover and replace the two 1.5V AAA cells.

4) Replace compartment cover and secure the screw.

In this direction will find a vision of the measurement technique:

NOTE: "This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive

atmospheres (powder, flammable gases)."

Tabla de contenidos

Otros manuales de Instrumento de medición de PCE Instruments

PCE Instruments

PCE Instruments PCE - 777N Manual de usuario

PCE Instruments

PCE Instruments RH5 Manual de usuario

PCE Instruments

PCE Instruments PCE-TDS 100 H Manual de usuario

PCE Instruments

PCE Instruments SIMCO FMX-003 Manual de usuario

PCE Instruments

PCE Instruments 3000 Series Manual de usuario

PCE Instruments

PCE Instruments PCE-WO2 10 Manual de usuario

PCE Instruments

PCE Instruments PCE-WMT 200 Manual de usuario

PCE Instruments

PCE Instruments IT55 Manual de usuario

PCE Instruments

PCE Instruments PCE-CSM 3 Manual de usuario

PCE Instruments

PCE Instruments PCE-TTC 30 Manual de usuario

PCE Instruments

PCE Instruments PCE-HFX 100 Manual de usuario

PCE Instruments

PCE Instruments PCE-DFG NF Series Manual de usuario

PCE Instruments

PCE Instruments PCE-MSL 1 Manual de usuario

PCE Instruments

PCE Instruments PCE-CT 29 Manual de usuario

PCE Instruments

PCE Instruments PCE-2800 Manual de usuario

PCE Instruments

PCE Instruments PCE-FM 50N Manual de usuario

PCE Instruments

PCE Instruments PCE-ITM 20 Manual de usuario

PCE Instruments

PCE Instruments PCE-DOM Series Manual de usuario

PCE Instruments

PCE Instruments PCE-W3 Manual de usuario

PCE Instruments

PCE Instruments PCE-VT 1000 Manual de usuario

PCE Instruments

PCE Instruments PCE-CT 90 Manual de usuario

PCE Instruments

PCE Instruments PCE-172 Manual de usuario

PCE Instruments

PCE Instruments PCE-CSM 10 Manual de usuario

PCE Instruments

PCE Instruments PHM 14 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario