Panasonic WJ-NV200K Manual de usuario
Network Disk Recorder
Quick Reference Guide
Model No.
WJ-NV200K, WJ-NV200VK, WJ-NV200K/G
Perform Basic Operations on the Screen
The recorder is operated with the mouse (accessory) connected to the front of the recorder. To perform operations, either click buttons on
the operation window displayed on the main monitor or turn the mouse wheel.
q[Setup] button
Displays the setup menu. The login window will be displayed
for users who are not authorized to perform the operation.
w[Logout] button
It is possible to log out from the recorder from this menu. To
prevent operation by unauthorized persons, it is recommended
to log out before leaving the recorder unattended.
eOperation panel
☞"Select a camera and switch images"
rDate & time operation panel
☞"Play image recorded at a designated date & time"
tCamera control panel
Contains the buttons for operating cameras with the panning/
tilting function. These allow panning/tilting and zooming of the
camera, moving the camera to a preset position, and adjusting
the focus and brightness.
yPlayback operation panel (While live images are being
displayed)
Selects the storage media from which to play back copied
image data. This panel is also used to perform playback of
images. (☞"Operation during playback")
u[Wide view] button
Camera images will be displayed in wide view on a multiscreen
(3-/6-/9-/16-screen).
While images are being displayed on a full screen, uwill be
changed to the [Ctrl screen] button. For playback or camera
operations, click the [Ctrl screen] button to return to this
screen.
iStatus display panel
☞"Status display"
☞"When an alarm or error occurs"
How to log in
During logout, wbecomes the [Login] button. When the login win-
dow is displayed, enter the user name and password.
e
r
t
y
qw
ui
<Image of Camera 1>
Date & time
display
Camera title
Image display area
Select a camera and switch images
Display images on a multiscreen
Select a camera and display live images
Click a camera number panel. While displaying on a multiscreen, double-clicking the
image in the image display area will switch to display of the clicked camera images on
a 1-screen.
Click the "Multiscreen select" button corresponding to the number of screens to
display. If the 4-screen is selected, each click of the button will switch between
camera 1 to 4, 5 to 8, 9 to 12 and 13 to 16. Clicking the camera number panel will
switch to a 4-screen displaying the images of 4 cameras, including the selected one.
Change the multiscreen pattern and the camera display
position
Play images recorded at a designated date & time
1Click the [Wide view] button.
1Click the [D]/[C] button in the [Playback] box to set the desired
time.
2
3
Click the Multiscreen select button corresponding to the number of
screens to display.
To change the camera display position, drag & drop the camera
number panel to the desired display position in the image display
area.
2Click the desired date on the calendar.
➜ Playback will start.
* Unless you wish to change the date, set the playback time and click
the [Play] button.
Play recorded images
Playback by designating a timeline
• The playback time of recorded images can be changed by dragging the playback
slider on the timeline.
• To skip to the designated point, set the "Jump interval" and click the [A]/[B] but-
tons.
• To display the desired time zones on the timeline, mark the checkboxes of the
respective items.
Schedule: Schedule recorded time zone
Event: Event recorded time zone
VMD: Time zone within which motion was detected in an image
Camera number panel
Multiscreen select
buttons
Camera number panel
TimelinePlayback slider
Play images selected from logs
Operation during playback
Status display
• Clicking the capturing image button while playback is paused will save a still
image (JPEG) on the SD memory card.
• The playback status display area shows the playback status of recorded images.
During fast forward/fast reverse playback, it will display the playback speed (x2,
x4, x8, x16, x32, x48)
• The playback speed will change each time the fast forward/fast reverse button is
clicked.
• Clicking the [Go to last] button will make playback skip to the latest recorded
images. The starting point is around 30 seconds before the date & time of the lat-
est recorded images.
The status display panel displays the statuses of the recorder. In the event that the recorder enters several statuses at the same time, these
are displayed in their order of priority. If both statuses have the same priority, the one that occurred last will be displayed.
Status Description Example Priority
Live Live images are being displayed. 5 (Low)
Playback Recorded images are being displayed. 5
Copying Data is being copied. Copying progress is displayed in %. 4
Formatting SD SD memory card is being formatted. 4
Finalizing DVD The DVD disc is being finalized to eject. 4
Formatting HDD HDD is being automatically formatted. 3
In the alarm state Indicates an alarm occurrence. Detailed information of the
alarm will be displayed.
2
In the error state Indicates that an error has occurred. A detailed description
of the error content will be displayed.
1 (High)
[Alarm] button
Capturing image button
Playback status display area
[Error] button
<When an error (alarm) has occurred>
A remedy will be displayed in the "Error log". Resolve the problem by following the
instructions given.
During playback, the playback panel changes as shown below. It contains buttons for playback operations such as playing recorded
images, pausing, fast forward and playing next image. Refer to the Operating Instructions (PDF) for details.
1Click the [Alarm] button or [Error] button on the status display
panel.
2
3
Click the [Log] button.
Select the line with the desired date & time by clicking it, and click
the [Play] button on the playback operation panel.
When an alarm or error occurs
When an alarm or an error occurs, the recorder performs alarm or error actions in accordance with the previously made settings.
The buzzer can be stopped by pressing the [BUZZER STOP] button on the recorder’s
front panel.
About face matching alarm
When a facial image is found to match previously registered facial features, the face
alarm button turns red and the name of the person associated with the registered
facial features is displayed. Clicking the face alarm button will display the buttons
related to face matching.
The copied images can be played on the recorder or on a PC using the dedicated
viewer software. The viewer software will automatically be copied on the storage
medium on which recorded images are copied.
To play back on this recorder, select the storage medium for copying under "Disk/
medium", select the line with the desired playback date & time from the displayed
copied data list, and click the [Play] button.
1Insert an SD memory card or a DVD disc (DVD-drive-equipped
models only) into the recorder.
* When using an unformatted SD memory card, format it using this
recorder.
Refer to the Operating Instructions (PDF) for how to format a SD memory
card.
2Click the [Copy] button.
3Specify the details for copying the recorded images.
Camera selection: Select the number of the camera whose images are to
be copied
Copy drive: Select "SD" or “DVD”.
Date & Time range: Set the start point and end point of the recorded
data.
4After checking the remaining capacity of the storage medium and
the volume of data to copy, click the [Copy] button.
Copy recorded images on an SD memory card or a DVD disc
DVD driveSDHC/SD memory card slot
[Alarm] button
[Alarm] button
[Error] button
5
6
Click the [OK] button in the copy start "Confirmation" window.
When copying on a DVD disc, it is necessary to complete copying
by removing the disc.
* If data is once copied on a DVD disc, no more copy will be possible
after ejection.
Cancel the alarm/error action
1When an alarm or error occurs, click the [Alarm] button or [Error]
button on the status display panel.
2Click the [Reset] button.
Nd0811-2022 3TR006578EDA Printed in China
Otros manuales para WJ-NV200K
3
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Hardware de red de Panasonic
Panasonic
Panasonic i-pro WJ-NT304 Manual de usuario
Panasonic
Panasonic Switching Diodes MA2S101 Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA6J786Y Manual de usuario
Panasonic
Panasonic Transistors 2SC3938G Manual de usuario
Panasonic
Panasonic Multi Chip Discrete UP05C8GF Manual de usuario
Panasonic
Panasonic PIN diodes MA27P02 Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA24D60 Manual de usuario
Panasonic
Panasonic Transistors 2SC3937G Manual de usuario
Panasonic
Panasonic WJ-NX200K Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA27D270G Manual de usuario
Panasonic
Panasonic Transistors 2SB1030A Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA3J745EG Manual de usuario
Panasonic
Panasonic Zener Diodes MAZSxxxG Series Manual de usuario
Panasonic
Panasonic WJ-NT104 Manual de usuario
Panasonic
Panasonic Transistors 2SC4691J Manual de usuario
Panasonic
Panasonic PIN Diodes MA27P07 Manual de usuario
Panasonic
Panasonic PIN Photodiodes PNZ334 (PN334) Manual de usuario
Panasonic
Panasonic K-NL404K/G Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA3X727 (MA727) Manual de usuario
Panasonic
Panasonic WJ-SX850 Manual de usuario
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
