Panasonic Transistors 2SC5846 Manual de usuario
Transistors
1
Publication date: August 2003 SJC00298AED
2SC5846
Silicon NPN epitaxial planar type
For general amplification
■Features
•High forward current transfer ratio hFE
•SSS-mini type package, allowing downsizing and thinning of the
equipment and automatic insertion through the tape packing
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC=10 µΑ, IE=060V
Collector-emitter voltage (Base open) VCEO IC=2 mA, IB=050V
Emitter-base voltage (Collector open) VEBO IE=10 µΑ, IC=07V
Collector-base cutoff current (Emitter open)
ICBO VCB =20 V, IE=0 0.1 µA
Collector-emitter cutoff current (Base open)
ICEO VCE =10 V, IB=0 100 µA
Forward current transfer ratio hFE VCE =10 V, IC=2 mA 180 390
Collector-emitter saturation voltage VCE(sat) IC=100 mA, IB=10 mA 0.1 0.3 V
Collector output capacitance Cob VCB =10 V, IE=0, f =1 MHz 2.2 pF
(Common base, input open circuited)
Transition frequency fTVCB =10 V, IE=−2 mA, f = 200 MHz 100 MHz
■Electrical Characteristics Ta=25°C ±3°C
Unit: mm
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO 60 V
Collector-emitter voltage (Base open) VCEO 50 V
Emitter-base voltage (Collector open) VEBO 7V
Collector current IC100 mA
Peak collector current ICP 200 mA
Collector power dissipation PC100 mW
Junction temperature Tj125 °C
Storage temperature Tstg −55 to +125 °C
Marking Symbol: 7K
1.20±0.05
0.52±0.03
0 to 0.01
0.15 max.
5˚
0.15 min.
0.80±0.050.15 min.
0.33
(0.40)(0.40)
12
3
5˚
0.80±0.05
1.20±0.05
+0.05
–0.02 0.10+0.05
–0.02
0.23+0.05
–0.02
1: Base
2: Emitter
3: Collector
SSSMini3-F1 Package
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
SSSMini3-F1 Package
This product complies with the RoHS Directive (EU 2002/95/EC).
2SC5846
2SJC00298AED
ICVBE IBVBE VCE(sat) IC
PCTaICVCE ICIB
hFE ICCob VCB
0 20 40 60 80 100 120 140
0
120
80
100
60
40
20
Collector power dissipation P
C
(mW)
Ambient temperature T
a
(°C)
042681012
0
50
40
30
20
10
Collector current IC(mA)
Collector-emitter voltage VCE (V)
IB=160 µA
140 µA
100 µA
80 µA
60 µA
40 µA
20 µA
120 µA
Ta=25°C
0 0.2 0.4 0.6 0.8 1.0
0
140
120
100
80
60
40
20
Collector current I
C
(mA)
Base current I
B
(mA)
V
CE
=10V
T
a
=25°C
0 0.2 0.4 0.6 0.8 1.0 1.2
0
20
40
60
80
100
120
Collector current IC(mA)
Base-emitter voltage VBE (V)
VCE =10V
Ta=75°C–25°C
25°C
0 0.2 0.4 0.6 0.8
0
3.5
0.5
1.0
1.5
2.0
2.5
3.0
Base current IB(mA)
Base-emitter voltage VBE (V)
V
CE
=10V
T
a
=25°C
1 10 100
0.01
0.1
1
Collector-emitter saturation voltage VCE(sat) (V)
Collector current IC(mA)
Ta=75°C
–25°C
25°C
IC
/ IB=10
1 10 100 1
000
0
50
100
150
200
250
300
350
Collector current IC(mA)
Forward current transfer ratio hFE
T
a
=75°C
–25°C
25°C
V
CE
=10V
0168243240
1
10
Collector-base voltage V
CB
(V)
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
f =1 MHz
T
a
=25°C
This product complies with the RoHS Directive (EU 2002/95/EC).
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Tabla de contenidos
Otros manuales de Hardware de red de Panasonic
Panasonic
Panasonic Circuit Protector Elements UNHZ203 Manual de usuario
Panasonic
Panasonic PN59021 Manual de usuario
Panasonic
Panasonic WJ-PB85C16 Manual de usuario
Panasonic
Panasonic BN-SW60ANL0 Manual de usuario
Panasonic
Panasonic Rectifier Diodes MA2J115 (MA115) Manual de usuario
Panasonic
Panasonic Transistor 2SC5378 Manual de usuario
Panasonic
Panasonic Transistors 2SA2162G Manual de usuario
Panasonic
Panasonic Transistors 2SB1030A Manual de usuario
Panasonic
Panasonic SH-ALL1C Manual de usuario
Panasonic
Panasonic BB-HCS301A - Network Camera Server Instrucciones de funcionamiento
Panasonic
Panasonic TY-FB7HM Manual de usuario
Panasonic
Panasonic WJ-PB85T08 Manual de usuario
Panasonic
Panasonic WJ-NXF02 Manual de usuario
Panasonic
Panasonic PIN Diodes MA2SP060G Manual de usuario
Panasonic
Panasonic WJ-PB85X08 Manual de usuario
Panasonic
Panasonic PIN diodes MA27P02 Manual de usuario
Panasonic
Panasonic Zener Diodes MAYS0750Y Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA2SD31 Manual de usuario
Panasonic
Panasonic Switching Diodes MA2S101 Manual de usuario
Panasonic
Panasonic Multi Chip Discrete UP05C8G Manual de usuario
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
