Panasonic Transistors 2SB1218G Manual de usuario

Transistors

Publication date: April 2007 SJC00352AED

This product complies with the RoHS Directive (EU 2002/95/EC).

2SB1218G

Silicon PNP epitaxial planar type

For general amplification

Complementary to 2SD1819G

■Features

•High forward current transfer ratio hFE

•S-Mini type package, allowing downsizing of the equipment and

automatic insertion through the tape packing and the magazine

packing.

■Absolute Maximum Ratings Ta=25°C

Parameter Symbol Rating Unit

Collector-base voltage (Emitter open) VCBO −45 V

Collector-emitter voltage (Base open) VCEO −45 V

Emitter-base voltage (Collector open) VEBO −7V

Collector current IC−100 mA

Peak collector current ICP −200 mA

Collector power dissipation PC150 mW

Junction temperature Tj150 °C

Storage temperature Tstg −55 to +150 °C

Parameter Symbol Conditions Min Typ Max Unit

Collector-base voltage (Emitter open) VCBO IC=−10 µA, IE=0 −45 V

Collector-emitter voltage (Base open) VCEO IC=−2 mA, IB=0 −45 V

Emitter-base voltage (Collector open) VEBO IE=−10 µA, IC=0 −7V

Collector-base cutoff current (Emitter open)

ICBO VCB =−20 V, IE=0 −0.1 µA

Collector-emitter cutoff current (Base open)

ICEO VCE =−10 V, IB=0 −100 µA

Forward current transfer ratio *hFE VCE =−10 V, IC=−2 mA 160 460 

Collector-emitter saturation voltage VCE(sat) IC=−100 mA, IB=−10 mA −0.3 −0.5 V

Transition frequency fTVCB =−10 V, IE=1 mA, f =200 MHz 80 MHz

Collector output capacitance Cob VCB =−10 V, IE=0, f =1 MHz 2.7 pF

(Common base, input open circuited)

■Electrical Characteristics Ta=25°C ±3°C

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.

2. *: Rank classification

Rank Q R S No-rank

hFE 160 to 260 210 to 340 290 to 460 160 to 460

Marking symbol BQ BR BS B

Product of no-rank is not classified and have no marking symbol for rank.

■Package

•Code

SMini3-F2

•Marking Symbol: B

•Pin Name

1. Base

2. Emitter

3. Collector

2SB1218G

2SJC00352AED

This product complies with the RoHS Directive (EU 2002/95/EC).

IBVBE ICVBE VCE(sat) IC

PCTaICVCE ICIB

hFE ICfTIECob VCB

0 16040 12080

200

160

120

Collector power dissipation PC(mW)

Ambient temperature Ta(°C)

0−12−10−8−2−6−4

−120

−100

−80

−60

−40

−20

=25°C

−250 µA

−200 µA

−150 µA

−100 µA

−50 µA

=−300 µA

Collector current I

(mA)

Collector-emitter voltage V

(V)

0−300 −450−150

−60

−50

−40

−30

−20

−10

=−5 V

=25°C

Base current IB(µA)

Collector current I

(mA)

0−0.4 −0.8 −1.6−1.2

−400

−300

−100

−250

−350

−200

−50

−150

VCE =−5 V

Ta=25°C

Base-emitter voltage VBE (V)

Base current IB(µA)

0−2.0−1.6−0.4 −1.2−0.8

−240

−200

−160

−120

−80

−40

=−5 V

=75°C−25°C

25°C

Base-emitter voltage V

(V)

Collector current I

(mA)

−1−10 −100

−1 000

−0.001

−0.01

−0.1

−1

−10 I

/ I

=10

25°C

−25°C

=75°C

Collector-emitter saturation voltage V

CE(sat)

(V)

Collector current I

(mA)

−1−10 −100

−1 000

600

500

400

300

200

100

VCE =−10 V

Ta=75°C

25°C

−25°C

Forward current transfer ratio hFE

Collector current IC(mA)

0.1 1 10 100

160

120

100

140

=−10 V

=25°C

Transition frequency f

(MHz)

Emitter current I

(mA)

−1−10 −100

Collector output capacitance

(Common base, input open circuited) Cob (pF)

f =1 MHz

=25°C

Collector-base voltage VCB (V)

2SB1218G

SJC00352AED

This product complies with the RoHS Directive (EU 2002/95/EC).

h Parameter VCE

NF IENF IEh Parameter IE

0.01 0.1 1 10

=−5 V

f =1 kHz

=2 kΩ

=25°C

Noise figure NF (dB)

Emitter current I

(mA)

0.1 1 10

=−5 V

=50 kΩ

=25°C

f =100 Hz

10 kHz

1 kHz

Noise figure NF (dB)

Emitter current I

(mA)

0.1 1 10

100

=−5 V

f =270 Hz

=25°C

(µS)

(kΩ)

(×10

−4

)

h Parameter

Emitter current I

(mA)

−1−10 −100

100

=2 mA

f =270 Hz

=25°C

(µS)

(kΩ)

(×10

−4

)

h Parameter

Collector-emitter voltage VCE (V)

This product complies with the RoHS Directive (EU 2002/95/EC).

SMini3-F2 Unit: mm

0.30 +0.05

−0.02

0.13 +0.05

−0.02

2.00 ±0.20

(0.89)

0.90 ±0.10

(0.65)(0.65)

1.30 ±0.10

1.25 ±0.10

2.10 ±0.10

0.425 ±0.050

(0.49)

0 to 0.10

(5°)

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Otros manuales de Hardware de red de Panasonic

Panasonic

Panasonic PIN diodes MA27P110G Manual de usuario

Panasonic

Panasonic PN261693D Manual de usuario

Panasonic

Panasonic Circuit Protector Elements UNHZ203 Manual de usuario

Panasonic

Panasonic Transistors 2SA2078G Manual de usuario

Panasonic

Panasonic WJ-PB85Y08 Manual de usuario

Panasonic

Panasonic E series Manual de usuario

Panasonic

Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Manual de usuario

Panasonic

Panasonic Transistors 2SB1722G Manual de usuario

Panasonic

Panasonic Switching Diodes MA36132E Manual de usuario

Panasonic

Panasonic Switching Diodes MA3J142AG Manual de usuario

Panasonic

Panasonic ESD Diodes MAZE062D Manual de usuario

Panasonic

Panasonic PIN Diodes MA27P07 Manual de usuario

Panasonic

Panasonic Fast Recovery Diodes MA2DF60 Manual de usuario

Panasonic

Panasonic Transistors 2SA2161J Manual de usuario

Panasonic

Panasonic Transistors 2SC4562G Manual de usuario

Panasonic

Panasonic Transistors 2SC3938G Manual de usuario

Panasonic

Panasonic Rectifier Diodes MA6X129 Manual de usuario

Panasonic

Panasonic Rectifier Diodes MA2J115 (MA115) Manual de usuario

Panasonic

Panasonic Transistors 2SC5846 Manual de usuario

Panasonic

Panasonic Schottky Barrier Diodes MA2SD32 Manual de usuario

Panasonic

Panasonic K-NL404K/G Manual de usuario

Panasonic

Panasonic Schottky Barrier Diodes MA3J7440G Manual de usuario

Panasonic

Panasonic Transistors 2SB1030A Manual de usuario

Panasonic

Panasonic Transistors 2SC3936G Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario