Panasonic ET-D3QW300 Manual de usuario

Thank you for purchasing this Panasonic product.

■To ensure correct use of this lens, please read the operating instructions supplied

with the lens and the projector carefully.

■Before using this product, be sure to read “Read this rst!” (Page 3).

■Please save this manual for future use.

Commercial Use

Model No. ET-D3QW300

ET-D3QS400

ET-D3QT500

ET-D3QT600

ET-D3QT700

ET-D3QT800

DPQX1392ZA/X1

Zoom lens 　　　　　　　　　

Operating Instructions

ENGLISH

FRANÇAIS

日本語

ET-D3QW300 ET-D3QS400

ET-D3QT500

ET-D3QT700 ET-D3QT800

ET-D3QT600

2-ENGLISH

Read this rst! ......................................................................................3

Before Use.............................................................................................4

Preparation............................................................................................4

Before replacing the projection lens........................................................4

Attaching and Detaching the Lens ..........................................................4

Peripheral focus adjustment function ......................................................5

Lens calibration .......................................................................................6

Projection relationships.......................................................................7

Lens shift ranges..................................................................................8

Specications .......................................................................................9

Dimensions .........................................................................................10

Projected image size and Projection distance.......Appendix / Annexe / 付録 1

The "Appendix" can be found after the Japanese language section ( 日本語 ).

█ Contents

ENGLISH-3

Read this rst! Always follow these precautions

WARNING:

Do not look at or place your skin into the light emitted from the lens while the

projector is being used.

Doing so can cause burns or loss of sight.

zStrong light is emitted from the projector’s lens. Do not look at or place your hands

directly into this light.

zTurn off the power when moving away from the projection lens or projector.

Do not project an image with the lens cover attached.

zDoing so can cause re.

CAUTION:

Before replacing the projection lens, be sure to turn off the power and

disconnect the power plug from the wall outlet.

zUnexpected projection of light may cause injury to eyes.

zReplacing the projection lens without removing the power plug may result in electric

shock.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

zStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to the object, or malfunction of the lens and

projector.

zStrong light is emitted from the projector’s lens.

Do not open the desiccant bag. Do not eat the contents.

Inadvertently ingesting desiccant could be harmful.

zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water

and seek medical attention.

zKeep desiccant out of the reach of children.

4-ENGLISH

This zoom lens is a projection lens equipped with an EEPROM*1 and stepping motor.

*1 EEPROM: Electrically erasable programmable read-only memory

■Supported projectors

PT-RQ50K

Note

zSome of the alphabet letters at the end of projector model numbers may be omitted in this

manual.

zModels other than the above may also be supported. Refer to the operating instructions for

your projector or the Panasonic website (https://panasonic.net/cns/projector/).

■Supplied Accessories

Make sure that the following has been provided.

Part name Appearance

Lens cover

1 each for front and rear

zThe product is delivered

with lens covers attached.

zThe shape and size of the

lens covers are different for

each product.

Before Use

Preparation

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating

instructions of the projector.

Attention

zMake sure that the projector power supply is switched off before attaching or detaching the

projection lens.

zAfter removing the projection lens, store it safely away from vibration or impacts.

z Do not touch the electrical contacts of the projection lens with your ngers. Dust and dirt on

the contacts may cause contact malfunctions, while static electricity may damage the unit.

zDo not touch the surface of the lens with bare hands. Finger prints and dirt on the surface

of the lens will be magnied by the lens and lower the quality of the projected image. Place

the supplied lens cover on the zoom lens when the projector is not in use.

zThe lens is made of glass. The lens could be damaged if brought into contact with or

rubbed against hard objects. Handle the lens carefully.

zUse a clean, soft and dry cloth to wipe away dust and dirt from the projection lens.

Do not use uffy cloths containing oil, water or dust for cleaning. The lens is easily

damaged, so do not apply excessive pressure when wiping it.

Attaching and Detaching the Lens

For details on attaching and detaching the projection lens, refer to the operating

instructions of the projector.

ENGLISH-5

Preparation (continued)

Peripheral focus adjustment function

When you change the size of the projected image, the focal balance between the center

and peripheral areas of the screen may shift. This shift in balance tends to increase

proportionally with smaller throw ratios.

The ET-D3QW300 / ET-D3QS400 / ET-D3QT500 is equipped with a peripheral focus

adjustment function to correct the shift in focal balance between the center and

peripheral areas of the screen.

1) Loosen the lock screw by

turning it counterclockwise.

2) Turn the lens barrel tip or

peripheral focus adjustment

ring in the direction of the

arrow to match the projection

distance displayed on the lens

to the actual distance from the

lens to the screen.

3) Tighten the lock screw by

turning it clockwise.

4) Operate the projector to align

the focus of the center of the

projected image.

Note

zThe projection distances displayed on the lens are approximate guides.

The illustrations in this procedure depict

attachment of the ET-D3QW300 onto the

PT-RQ50K.

zThe structure of the peripheral focus

adjustment part differs depending on the

projection lens type.

Peripheral focus adjustment ring

Lock screw

■Adjusting the focus

6-ENGLISH

Lens calibration

Perform lens calibration after attaching the lens.

The illustrations in this procedure depict

use of the ET-D3QW300 as an example.

1) Press the <MENU> button.

2) Use the ▲ and ▼ buttons to

select [PROJECTOR SETUP],

and press the <ENTER>

button.

zThe [PROJECTOR SETUP] screen

appears.

3) Use the ▲ and ▼ buttons to

select [LENS], and press the

<ENTER> button.

zThe [LENS] screen appears.

4) Use the ▲ and ▼ buttons to

select [LENS CALIBRATION],

and press the <ENTER>

button.

zThe [LENS CALIBRATION] screen

appears.

5) Use the ▲ and ▼ buttons to

select [SHIFT/FOCUS/ZOOM],

and press the <ENTER>

button.

zThe conrmation screen appears.

6) Use the and buttons to

select [OK], and press the

<ENTER> button.

zLens calibration starts.

zThe projection lens moves to the

home position after adjustment range

calibration is complete.

1/2

PROJECTOR SETUP

PROJECTOR ID ALL

PROJECTION METHOD

LENS

OPERATION SETTING NORMAL

LIGHT OUTPUT 100.0%

BRIGHTNESS CONTROL AUTO

NO SIGNAL SETTING

LAST MEMORY

LAST USED

INITIAL STARTUP

STARTUP INPUT SELECT

OFF

DATE AND TIME

SCHEDULE

MULTI PROJECTOR SYNC

MENU SELECT

ENTER

SUB MENU

MENU SELECT

ENTER

LENS

LENS INFORMATION SETTING

LENS MEMORY

LENS HOME POSITION

ACTIVE FOCUS OPTIMIZER

LENS CALIBRATION

EXECUTE

MENU SELECT

ENTER

LENS CALIBRATION : ET-D3QW300

SHIFT/FOCUS/ZOOM

SHIFT/FOCUS

ZOOM

LENS CALIBRATION : ET-D3QW300

Proceed LENS CALIBRATION,

and return to HOME POSITION.

EXECUTE

CHANGE

ENTER

CANCEL

Note

zIf lens calibration is not performed, the available zoom range will be narrowed.

Preparation (continued)

ENGLISH-7

Projection relationships

The dimensional relationship between the screen and the projector is shown below.

■Dimensional relationship diagram

Note

zThis diagram assumes that the size and position of the projected image will be adjusted so

that the image lls the entire screen.

zThis illustration is not drawn to scale.

L Projection distance

LW Minimum distance

LT Maximum distance

L1 Lens protrusion dimension

SH Projected image height

SW Projected image width

SD Projected image size

zDimension for L1 (approximate values) (Unit: m)

ET-D3QW300 ET-D3QS400 ET-D3QT500 ET-D3QT600 ET-D3QT700 ET-D3QT800

0.246 0.232 0.208 0.149 0.221 0.267

Note

zThe illustrations of projectors in this manual are for informational purposes only and do not

represent a specic projector model. Congurations may vary with the model.

Attention

zTo prevent obstruction of the intake and exhaust vents, install the projector with a

clearance at least 500 mm (1 ft. 7 in.) from walls and objects.

If you are installing the projector in a sealed space, be sure to provide additional air

conditioning equipment and ventilation equipment. Insufcient ventilation will result in an

accumulation of heat and may activate the projector's protection circuit.

zAvoid setting up in places which are subject to sudden temperature changes, such as near

an air conditioner or lighting equipment (studio lamps, etc.).

■Dimensional relationship

For details on the projection distance (L), refer to “Projected image size and Projection

distance” and “Projection distance formulas” in the Appendix.

L (LW/LT)

SW SH

投写画面

スクリーン

Projected image

Screen

8-ENGLISH

After moving the lens to the home position according to “Lens calibration” on page 6,

you can use the lens shift adjustment function on the projector to adjust the position of

the projected image within the respective lens shift ranges based on the optical screen

center position (standard projection position). The optical screen center position is the

screen position using the optical center of the projector as the base.

Perform lens shift adjustment within the ranges shown in the following illustrations.

Moving the lens outside of the adjustment ranges may alter the focus. This occurs due

to limitations in lens movement that are intended to protect the optical components.

The following illustrations depict lens shift ranges for oor installations of the projector.

ET-D3QW300

0.4V

0.14H0.14H

0.4V

Standard

projection position

Projected image

width H

Projected

image

height V

Optical center

ET-D3QS400 / ET-D3QT500

0.45V

0.16H0.16H

0.45V

Projected

image

height V

Projected image

width H

Standard

projection position

Optical center

ET-D3QT600

0.08H0.08H

0.25V 0.25V

Projected image

width H

Projected

image

height V

Standard

projection position

Optical center

Lens shift ranges

ENGLISH-9

Lens shift ranges (continued)

ET-D3QT700 / ET-D3QT800

0.1H0.1H

0.3V 0.3V

Projected image

width H

Projected

image

height V

Standard

projection position

Optical center

Note

zThe home position of the projector a point of origin position for the lens shift (i.e., vertical and

horizontal positions of the lens) based on the results of lens calibration. It is not the optical

center position of the screen.

Specications

Check the specications of each projection lens, and use the appropriate lens for your

intended use.

Model No. ET-D3QW300 ET-D3QS400 ET-D3QT500

F value 2.5 2.5 2.5

Focal Length (f) 35.2 mm (1-3/8") -

53.7 mm (2-1/8")

45.3 mm (1-25/32") -

65.6 mm (2-19/32")

61.4 mm (2-13/32") -

105.2 mm (4-5/32")

Dimensions

Width 187 mm (7-3/8") 187 mm (7-3/8") 198 mm (7-25/32")

Height 192 mm (7-9/16") 192 mm (7-9/16") 203 mm (8")

Depth 466 mm (18-11/32") 450 mm (17-23/32") 420 mm (16-17/32")

Net Weight 9.3 kg (20.50 lb) 8.5 kg (18.74 lb) 9.6 kg (21.16 lb)

Model No. ET-D3QT600 ET-D3QT700 ET-D3QT800

F value 2.5 2.5 2.5

Focal Length (f) 85.0 mm (3-11/32") -

121.6 mm (4-25/32")

122.8 mm (4-27/32") -

172.3 mm (6-25/32")

156.5 mm (6-5/32") -

243.1 mm (9-9/16")

Dimensions

Width 187 mm (7-3/8") 187 mm (7-3/8") 187 mm (7-3/8")

Height 192 mm (7-9/16") 192 mm (7-9/16") 192 mm (7-9/16")

Depth 370 mm (14-9/16") 442 mm (17-13/32") 486 mm (19-1/8")

Net Weight 6.4 kg (14.11 lb) 7.3 kg (16.09 lb) 8.0 kg (17.64 lb)

10-ENGLISH

Dimensions

■ET-D3QW300

(Unit: mm)

Ø155 (6-3/32")

466 (18-11/32")

187 (7-3/8")

192 (7-9/16")

Ø155 (6-3/32")

■ET-D3QS400

(Unit: mm)

450 (17-23/32")

192 (7-9/16")

Ø139 (5-15/32")

187 (7-3/8")

Ø155 (6-3/32")

■ET-D3QT500

(Unit: mm)

Ø155 (6-3/32")

420 (16-17/32")

Ø178 (7")

203 (8")

198 (7-25/32")

Otros manuales para ET-D3QW300

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lente de la cámara de Panasonic

Panasonic

Panasonic Lumix H-X015E-K Manual de usuario

Panasonic

Panasonic H-RS100400 Manual de usuario

Panasonic

Panasonic S-S35 Manual de usuario

Panasonic

Panasonic WV-LFR4R5C3 Manual de usuario

Panasonic

Panasonic H-FS35100PP Manual de usuario

Panasonic

Panasonic H-PS45175 Manual de usuario

Panasonic

Panasonic Lumix S Pro S-R1635 Manual de usuario

Panasonic

Panasonic Lumix S-R24105 Guía de instalación

Panasonic

Panasonic H-ES12060PP Manual de usuario

Panasonic

Panasonic ET-DLE085 Manual de usuario

Panasonic

Panasonic WV-LXY18C4 Manual de usuario

Panasonic

Panasonic Lumix H-F007014 Manual de usuario

Panasonic

Panasonic WV-LZ62/8S Manual de usuario

Panasonic

Panasonic H-FS045200E Manual de usuario

Panasonic

Panasonic Lumix H-H020A Manual de usuario

Panasonic

Panasonic AW-LZ17MD9 Manual de usuario

Panasonic

Panasonic WV-LA12A Manual de usuario

Panasonic

Panasonic H-FS12032 Manual de usuario

Panasonic

Panasonic S-R1635 Manual de usuario

Panasonic

Panasonic ET-ELU20 Manual de usuario

Panasonic

Panasonic Lumix H-ES045 Manual de usuario

Panasonic

Panasonic ET-ELW22C Manual de usuario

Panasonic

Panasonic Lumix S-E70200GK Manual de usuario

Panasonic

Panasonic H-HS030 Manual de usuario

Manuales populares de Lente de la cámara de otras marcas

THORLABS

THORLABS ELL15 Manual de usuario

FUJICA

FUJICA ZC1000 Manual de usuario

Tamron

Tamron A09 Manual

Sony

Sony SEL-55210 Manual de usuario

Sony

Sony VCL-HG2037 Manual de usuario

Honeywell

Honeywell HLM25V6F12 Manual de usuario

Sony

Sony VCL-ST30 Manual de usuario

Canon

Canon FD 35 - 70 mm Manual de usuario

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Manual de usuario

ARRI

ARRI Lenses Manual de usuario

Nikon

Nikon AF-S VR 24-120 f/3.5-5.6G IF-ED Manual de usuario

Rokinon

Rokinon DS50M-C Manual de usuario

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Manual de usuario

Sony

Sony VCL-DE07T Manual de usuario

Canon

Canon FD Lens Manual

Tamron

Tamron A036 Manual de usuario

Samsung

Samsung 20-50mm F3.5-5.6 ED II Manual de usuario

Tamron

Tamron 272E Manual de usuario