OPTO-EDU A13.1005-B Manual de usuario

To ensure the safety and obtain satisfactory performance, please study this

instruction manual thoroughly before start to use your instrument.

A13.1005

Metallurgical Microscope, Bright

Field/Dark Field

Instruction Manual

Contents A13.1005

User Notice „„„„„„„„„„„„„„„„„„„„„„„„ „2

1 Component Names „„„„„„„„„„„„„„„„„„„„„„ 4

2 Assembly „„„„ „„„„„„„„„„„„„„„„„„„„„ 5

2-1Assembly diagrams„„„„„„„„„„„„„„„„„„„„„ 5

2-2Assembly steps

2-2-1 install L-plate„„„„„„„„„„„„„„„„„„„„„6

2-2-2 Install supporting component„„„„ „„„„„„„„„„6

2-2-3 Install fine-coarse movement component „„„„„„„„„6

2-2-4Install connecting plate„„„„„„„„„„„„„„„ „„7

2-2-5 Install converter and objective„„„„„„„„„„„„„„7

2-2-6 Install metallographic device„„„„„„„„„„„„„„„7

2-2-7Install viewing head„„„„„„„„„„„„„„„„„„„8

3 Adjustment and Operation

3-1 Connect power source and regulate light„„„„„ „„„„„„„9

3-2 Sample placement„„„„„„„ „„„„„„„„„„„„„„„9

3-3Adjustment of coarse focus hand wheel„„„„„„„„„„„„„10

3-4Adjustment of pupil distance„„„ „„„„„„„„„„„„„„10

3-5 Visibility adjustment„„„„„„„„„„„„„„„„„„„„„10

3-6 3-gear light path switch„„„„„„„„„„„„„„„„„„„„11

3-7 Usage of color filter„„ „„„„„„„„„„„„„„„„„„„12

3-8 Usage of extension function board„„„„„„„„„„ „„„„„12

4 Components Size„„„„ „„„ „„„„„„„„„„„„„„13

5Technical Specification„„„„„„„„„„„„„„„„„„„„„14

6 Trouble Shooting„„„„„„„„„„„„„„„„„ „„„„„15

User A13.1005

1. Safety Symbols

symbol

explanation

Indicates that the surface becomes hot, and should not be touched with bare

hands。

Before use, carefully read the user manual .Improper use could result in

personal injury to the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

2. Safety Precautions

1. Be careful when opening box to keep objectives from dropping and damage, avoid

objectives from sweat and fingerprints.

2. Do keep the metallographic device out of direct sunlight, high temperature or humidity,

dusty and easy shaking environment. Make sure the stage is smooth, horizontal and firm

enough.

3. When moving the instrument, grip two sides of the bottom of the microscope with your

two hands.

★DO NOT hold the coarse-fine movement hand wheel or the lamp house or the

microscope may be damaged.

4. Please ensure enough cooling room for power box and keep away from power wires.

5. When running, the lamp house and nearby parts will be very hot. Please ensure 10cm

cooling room for them.

6. Make sure the instrument is earthed, to avoid lighting strike

7. For safety, be sure the main switch is in “O”(off) state and cut off the power supply

before replacing the bulb or the fuse. If you replace the bulb during use or right after use,

allow the lamp bulb and the lamp house to cool completely before touching.

8. Use the dedicate power wires。

9. When camera or TV lens is needed, make sure the adding weight is less than 2.8kg.

A13.1005

3. Maintenance and Care

1. All the lenses have been adjusted properly; do not dismount them by yourself please.

2. The nosepiece and coarse and fine focusing parts are so delicate that it is forbidden to

disassemble them carelessly by yourself.

3. Keep the instrument clean ,and do not pollute the optical element when wiping away the dust

on the instrument.

4. The contaminations on the prism, like fingerprints and oil smudges, could be gently wiped

with a piece of soft cloth or tissue paper, gauze which has been immersed in pure alcohol or

ether. (Note that the alcohol and ether are highly flammable, do keep them away from

the fire or potential sources of electrical sparks, and use them in a drafty room as

possible as you can.)

5. Do not attempt to use organic solvents to clean the microscope components other than the

glass components. To clean them, use a lint-free, soft cloth slightly moistened with a diluted

neutral detergent.

6. When using, if the microscope is splashed by liquid, cut off the power at once, and wipe away

the splash.

7. Do not disassemble any parts of the microscope, as this will affect the function or reduce the

performance of the microscope.

8. Place the instrument in a cool, dry position.After using the microscope, remember to cover it

1. Component Names A13.1005

Power box

2．Assembly A13.1005

2-1Assembly Diagram

The following picture shows the sequence of the modules in which the number stand for the

steps of assemble.

Before assembling, make sure that every module is free of dusts and dirt. Do not scratch

any modules or glass surfaces.

Keep the provided hexagon screwdriver as you may need it when changing modules.

○

2-2Assembly Steps A13.1005

2-2-1 Install L-plate（pic.1）

Fix the L-plate and the fine-coarse

movement component together by 4

matched bolts and washers.

2-2-2 Install supporting component

（pic.2）

Insert the supporting component to the

corresponding holes on the L-plate and

fix it on the fine-coarse movement

component by 4 matched bolts and

washers.

2-2-3 Install fine-coarse movement

component（pic.3）

Stack the fine-coarse movement

component on the column of the

platform and screw the fixing bolt ○

1 .

If the specimen is too high, we can

stack the locking collar ○

2 on the

column before the install of

fine-coarse movement component.

Pic.1

Pic.2

Pic.3

○

A13.1005

2-2-4 Install connecting plate（pic.4）

Put the connecting plate on the L-plate

and fix it by 4 matched bolts. Make sure the

locating surface ○

1 is adjacent with the

surface ○

2 of the L-plate

2-2-5 Install converter and objective

（pic.5）

1. Insert the converter to the socket on the

connecting plate by path shown in pic.5

and tighten the bolt○

1 by a hexagon

screwdriver to fix it.

2. Screw the objectives to the holes on the

converter in sequences.

2-2-6 Install metallographic device

（pic.6）

★put the swallow tail of the metallographic

device in the corresponding holes on the

connecting plate and tighten the bolt○

2 in

pic.5.

★If it is a bright and dark field

metallographic, we should insert the

lamp house into the back of the

metallographic device and tighten

bolt○

1 to fix it.

Pic.4

○

Pic.5

Pic.6

○

A13.1005

2-2-7 Install viewing head（pic.7）

1. Put trinocular viewing head onto the

swallow-tail of the connecting-plate and

screw bolt○

1 to fix the viewing head.

2. Insert the eyepiece to the lens cone of the

viewing head.

Pic.7

○

3. Adjustment and Operation A13.1005

3-1Connect power source and regulate

light（pic.1,pic.2）

1. Connect the air plug of halogen lamp

house with the aerial socket○

1of the

power box, plug one head of power line to

socket○

2and the other head to the power

supply. Toggle the converter switch○

3to

proper position according the power

demand of location.

2. Make sure the light adjust knob○

5in a

minimum position and toggle the main

switch○

4in the front of power box to the

“－” position. (It’s only need to plug

the adapter to the socket when using

LED house)

3. Turn the knob○

5to the MAX position to

increase the voltage and the brightness of

lamp house.

3-2 Sample placement（pic.3）

Place the sample○

1on platform○

○sample should be plat or parallel.

Besides, reflected light should not

entrance the objective otherwise the

observation will fail.

Be careful when convert objectives. The

objective may touch the sample when

converting objective after using a short

working distance objective.

Pic.1

Pic.2

Pic.3

○

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Microscopio de OPTO-EDU

OPTO-EDU

OPTO-EDU A11.6603 Manual de usuario

OPTO-EDU

OPTO-EDU A23.3645 Series Manual de usuario

OPTO-EDU

OPTO-EDU A10.1018 Manual de usuario

OPTO-EDU

OPTO-EDU A18.1825-LCD Manual de usuario

OPTO-EDU

OPTO-EDU A11.1141 Series Manual de usuario

OPTO-EDU

OPTO-EDU A33.1501 Manual de usuario

OPTO-EDU

OPTO-EDU A22.3670 Series Manual de usuario

OPTO-EDU

OPTO-EDU A11.1007 Manual de usuario

OPTO-EDU

OPTO-EDU A12.0911 Manual de usuario

OPTO-EDU

OPTO-EDU EX31 Series Manual de usuario

OPTO-EDU

OPTO-EDU A23.0910 Manual de usuario

OPTO-EDU

OPTO-EDU A15.1302 Manual de usuario

OPTO-EDU

OPTO-EDU A23.1502 Series Manual de usuario

OPTO-EDU

OPTO-EDU A14.1065 Manual de usuario

OPTO-EDU

OPTO-EDU A11.1303 Series Manual de usuario

OPTO-EDU

OPTO-EDU A23.3645N Series Manual de usuario

OPTO-EDU

OPTO-EDU A12.0910 Manual de usuario

OPTO-EDU

OPTO-EDU A13.0905 Manual de usuario

OPTO-EDU

OPTO-EDU XD Series Manual de usuario

OPTO-EDU

OPTO-EDU A15.2604 Manual de usuario

OPTO-EDU

OPTO-EDU A22.1504 Series Manual de usuario

OPTO-EDU

OPTO-EDU A33.1502 Manual de usuario

OPTO-EDU

OPTO-EDU A18.1828-LCD Manual de usuario

OPTO-EDU

OPTO-EDU A16.2615-L Manual de usuario

Manuales populares de Microscopio de otras marcas

Thermo Scientific

Thermo Scientific Nicolet iN10 Guía

National

National DC3-163 Manual de usuario

KERN Optics

KERN Optics OPE-1 Manual de usuario

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manual de usuario

Prior

Prior Lux POL Manual de usuario

Opitec

Opitec Smartscoop 115615 Manual de usuario

KERN

KERN OPO-1 Manual de usuario

Topcon

Topcon SP-1P Manual de usuario

Motic

Motic PA43 Manual de usuario

Leica

Leica DVM5000 Guía del usuario

MshOt

MshOt MZ62 Manual de usuario

KERN Optics

KERN Optics OZR-5 Manual de usuario

VWR

VWR VisiScope 384 Series Manual de usuario

Nikon

Nikon ECLIPSE E200 POL Manual de usuario

Leica

Leica DI C800 Manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

Olympus

Olympus SZ61 Manual de usuario