One Forall URC-7530 Manual de usuario

Retain For Future Reference

USER GUIDE & CODE BOOK

Universal Remote

URC-7530

QUICK SET-UP

QUICK SEARCH

INSTALLING THE BATTERIES

THE KEYPAD

INSTALLATION

Direct Set-Up 7

The Search Method 8

SET-UP CODES

Quick Code Reference 10

Televisions 11

Video Recorders 16

ADVANCED FEATURES

Controlling Colour and Brightness 19

Punch-Through 19

Teletext and Fastext 20

Sleeptimer 21

Scan 23

The AUX Key 24

Changing the Device Keys 25

TROUBLE-SHOOTING

Helpful Hints 26

Consumer Help-Line 27

Table of Contents

About Your ONE FOR ALL 3

Your ONE FOR ALL 3 Package contains:

Your ONE FOR ALL 3 Remote

Your ONE FOR ALL 3 Manual

Your manual is divided into two parts: set-up instructions and

device codes. You may need this guide again in the

future, so please be sure to keep it.

Your ONE FOR ALL 3 needs 2 new “AA/LR6” batteries.

Your ONE FOR ALL 3 can operate three devices: a Television,

a Video Recorder and a second Television or Video.

Device

Keys

Volume-

Rewind/

Text on

TV/VCR/Red Record/Yellow

Stop/Green

Pause/Hold

Fast Forward/

Expand

Programme-

Programme+

Power

LED

Number

Keys

Teletext Keys

Slow/Blue

Play/Text off

Volume+

Mute/Scan

Magic

Quick Set-Up

The instructions below and on the next page

can be used to quickly install your new ONE

FOR ALL.

You can use the Quick Set-Up below with the

codes listed on pages 11-18. If this doesn’t

work, try the Quick Search on the next page.

The Quick Search can also be used even if

your brand is not listed at all.

Press device key:

Press and hold

until the red light blinks

twice. Then release.

Enter

(4-digit code). See pages

11-18. The red light will

blink twice.

Aim remote at your

device and press

(or PLAY).

NOTES:

- Make sure your device is switched on.

- The instructions above are a “Quick”

set-up guide. For further explanation,

please refer to the pages within.

- Make sure you write your Set-Up codes

in the boxes provided inside the

battery compartment for easy future

reference.

or or

____

Quick Search

Aim your ONE FOR ALL at

your device and press

device key:

Press and hold

until the red light blinks

twice.

Press

Alternate between the

device key ( )

and until your

device turns off.

When device turns off,

press . The red

light will blink twice.

Your device is Set Up.

NOTES:

- Make sure your device is switched on.

- Make sure you aim your ONE FOR ALL

at your device during “Quick Search”.

- During step 4, you may have to press

these keys many times, so please be

patient.

- If your Video’s original remote control

does not have a power key, press PLAY

instead of POWER during step 4.

ie:

or or

Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries.

Remove the battery cover from the

back of your ONE FOR ALL 3 by

pressing down on the tab.

Match the batteries to the + and -

marks inside the battery case, then

insert the batteries.

Press the battery cover back into

place.

Installing the Batteries

Important notes:

- In order to avoid having to reprogram your ONE FOR ALL 3

after you remove the batteries, you will need to insert new

batteries within 5 minutes. Also it is best that you do not use

rechargeable batteries.

- On the inside of the battery compartment door you will find a

label on which to write your Set-Up codes after your ONE FOR

ALL 3 is set up for your device. Please write down your codes

for easy, future reference.

Key Function

LED LED

The LED (Light Emitting Diode) flashs red to

show the remote is working.

MAGIC Key

The MAGIC key is used to set up your ONE

FOR ALL 3 and to access special functions.

Power

The Power key controls the same function as

it did on your original remote.

Device Keys

The TV, VCR and AUX keys select the home

entertainment device to be controlled. For

example pressing the TV key allows the

remote to control the functions of your

Television, after pressing VCR you can

operate your Video Cassette Recorder and

the AUX key operates a second television or

video recorder.

Volume, Programme

The Volume and Programme keys control

the two most frequently used functions of

your Television. They operate just as those on

your original remote.

Mute

The Mute key operates the same function it

did on your orginal remote control. It is also

used to activate the Scan feature (see page

23).

The Keypad

Key Function

Number Keys

The Number keys (0-9, 10, 20) provide

functions just like your original remote, such

as direct access programme selection. If your

original remote uses one/two digit input

switching (-/-- symbol), this function can be

obtained by pressing the -/-- key, which is the

same as the 10 key. If your original remote

has an AV, key this function can also be

found under the 20 key.

Video Recorder Keys

After pressing the VCR key, the Video

Recorder keys operate the functions of your

Video Recorder. To prevent accidental

recording, the Record key must be pressed

twice to start recording.

Teletext Keys

After pressing the TV key, the top row of

the VCR keys are used to operate the main

teletext functions. The symbols below the

keys are for teletext. The text keys are used

to access the teletext functions of your

Television. Of course, your Television must be

teletext capable. For an explanation of the

teletext symbols, please refer to page 20 of this

manual. For a detailed explanation on how

teletext works, please refer to the manual

of your Television set.

After pressing the TV key, the bottom row

of the Video Recorder keys marked red,

green, yellow and blue, allow you to access

the fastext functions of your television.

Again, your television must be fastext

capable to operate these functions. For a

more detailed explanation of teletext and

fastext, please refer to the manual of your

television set.

The Keypad

(red)

(on)

(off)

(expand)

(hold)

(blue)

(yellow)

(green)

-/--

Direct Set-Up

Setting Up Your Devices

To set up the ONE FOR ALL 3 for your TV or Video Recorder,

follow the instructions below.

To set up your TV:

Find your Television code in the

Set-Up Code section (starting on page

11). Codes are listed by brand name. The

most popular code is listed first. Make

sure your Television is switched on.

Press and release your ONE FOR ALL 3’s

TV key, then press and hold down the

MAGIC key until the red light blinks

twice (the light will blink once then

twice).

Enter your four-digit TV code using the

number keys. The red light will blink

twice.

Now, aim the ONE FOR ALL 3 at your

Television and press POWER. If your

Television switches off, your ONE FOR

ALL 3 should be ready to run your

Television.

Turn your device back on and try all the

remote’s functions to ensure they are

working properly. If the functions do not

work properly, repeat steps 1-5 using

another code listed under your brand.

Write your code in the four boxes provided in the battery

compartment and on page 10 for easy future reference.

ONE FOR ALL

Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

0009

0087, 0093, 0363, 041

0217, 0216

0264

0516

0087

0216, 0009, 0037, 0

0037, 0274

0361, 0208, 0371,

Installation

Important notes:

- To set up your Video Recorder, follow the same instructions

above, only press the VCR key during step 2.

- Some codes are quite similar. If your device does not respond or

is not functioning properly with one of the codes, try another

code listed under your brand.

- If your Television or Video does not respond, follow steps 1

through 5 with each code listed for your brand. If none of the

codes listed for your brand operate your device, try the search

method described on page 8, even if your brand is not listed at

all.

- If you change programmes on your Television through your

Video Recorder, press VCR and not TV, before you use the

programme keys.

- Remember, to control your device after the ONE FOR ALL is set

up, you must press the device key first (TV, VCR, AUX).

- Write the codes for your devices in the boxes provided on page

10 and in the battery compartment for easy future reference.

____

The Search Method

If your Television or Video Recorder, does not respond to the

ONE FOR ALL 3 after you have tried all the codes listed for

your brand, try searching for your code. The Search Method

may also work if your brand is not listed at all.

Let's say you cannot get your ONE FOR ALL 3 to control your

Television.

To search for your TV code:

Switch your Television on.

Press the TV key on your ONE FOR ALL 3.

Aim the ONE FOR ALL 3 at your

Television. Press and hold down

MAGIC until the ONE FOR ALL 3’s red

light blinks twice. Then, press 9 9 1.

The red light will blink twice.

Now, alternate between TV and POWER,

over and over, until your Television turns

off. You may have to press these keys

many times, so please be patient.

Remember to keep pointing the ONE

FOR ALL 3 at your Television when you

press the POWER and TV keys.

When your Television turns off, press

MAGIC. Don't forget, press MAGIC as

soon as your Television turns off.

The ONE FOR ALL remote should now be

ready to operate your device. Turn your

device back on and try all the remote’s

functions to ensure they are working

properly. If some of the ONE FOR ALL’s

commands are not operating correctly,

try the search method again. You may be

using the wrong code.

Installation

Important notes:

- To search for the code for your Video follow the instructions

above only press VCR during steps 2 and 4.

- If your Video's original remote control does not have a power

key, press PLAY instead of POWER when searching for your code.

- During step 4, you may have to press these keys many times (up

to 150!) so be patient. Remember you must aim the ONE FOR

ALL at your device the entire time you are searching for your

code.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Control remoto universal de One Forall

One Forall

One Forall URC-6230 Manual de usuario

One Forall

One Forall URC-7562 Manual de usuario

One Forall

One Forall Little Easy Manual de usuario

One Forall

One Forall URC 7200 / 7201 Manual de usuario

One Forall

One Forall URC-3550 Manual de usuario

One Forall

One Forall URC-7556 Manual de usuario

One Forall

One Forall URC-4220 Manual de instalación y operación

One Forall

One Forall URC-7525 Manual de usuario

One Forall

One Forall URC-7740 Manual de usuario

One Forall

One Forall 704917 Manual de usuario

One Forall

One Forall URC-7240 Manual de usuario

One Forall

One Forall KAMELEON 5 Manual de usuario

One Forall

One Forall Audio Zapper Manual de usuario

One Forall

One Forall URC-7532 Manual de usuario

One Forall

One Forall URC-1625 Manual de usuario

One Forall

One Forall URC-7542 Manual de usuario

One Forall

One Forall URC-7800 Cinema 7+ Manual de usuario

One Forall

One Forall URC-2981 Hoja de información del producto

One Forall

One Forall URC-7562 Manual de usuario

One Forall

One Forall URC-3440 Manual de usuario

One Forall

One Forall URC 3050 Manual de usuario

One Forall

One Forall URC-6210 Manual de usuario

One Forall

One Forall (URC-8910) Manual de usuario

One Forall

One Forall Kameleon URC-9964B00 Manual de usuario

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario