One Forall URC10820N Manual de usuario

10-Device Universal

Remote Control

with Learning

Control Remoto Universal

de 10 Dispositivos

con Aprendizaje

URC10820N User’s Guide • Guía del Usuario

Contents

Introduction................................................ 2

Installing Batteries ..................................... 2

Features and Functions.............................. 2

Key Charts................................................... 3

Setting Up Your Components.................... 5

Using Learning ........................................... 8

Changing Volume Lock ............................. 9

Using Channel Scan.................................. 12

Programming Favorite Channel Scan ..... 12

Re-Assigning Device Keys ....................... 12

Using Keymover ...................................... 13

Restoring Factory Default Settings ........ 14

Troubleshooting....................................... 14

FCC Compliance ....................................... 15

Additional Information............................ 15

Limited Lifetime Warranty ...................... 16

Contenido

Introducción ............................................ 17

Instalación de las Baterías........................ 17

Características y Funciones ...................... 17

Funciones de las Teclas............................. 18

Programación de

un Dispositivo (Aparato)........................ 20

Uso de la Función Aprendizaje................ 23

Cambio del Bloqueo del Volumen ......... 24

Uso de la Exploración de Canales............ 27

Programación de una Exploración

de Canales Favoritos ............................ 27

Reasignación de las Teclas

de Dispositivos ...................................... 27

Uso de la Función Keymover .................. 28

Restauración de los Valores Fijados

en la Fábrica ......................................... 29

Localización de Fallas............................... 29

Conformidad con la FCC ......................... 30

Información Adicional ............................. 30

Garantía Limitada durante la Vida Útil

del Producto .......................................... 31

Introduction

The One For All 10-Device Universal Remote Control with Learning

(URC-10820N) is pre-programmed with the latest library of codes,

and it is designed to operate up to ten home entertainment

devices, including TV, video, DVD, Cable, Satellite and audio

components. The remote control requires four (4) new AAA alkaline

batteries (not included) and easy programming to control your

devices. For best results, please read and perform all instructions

listed here. Also, keep these instructions for future reference.

Installing Batteries

1. On the remote control’s back, push down on the top of the

battery cover (where indicated by the arrows). Then slide the

battery cover out.

2. Obtain four (4) new AAA

alkaline batteries. Match the

+ and – marks on the batteries

to the + and – marks in the

battery case, then insert the

new batteries.

3. Slide the battery cover back

into place. The tab should click

when the cover is locked.

4. Test the remote control by

ﬁrst pressing POWER and then

any mode key (e.g., TV). If the

batteries are inserted correctly,

the LED (red light) will blink

once.

NOTE: When batteries are low,

the remote control will blink

5 times after each key press.

The remote will stop operating

when the batteries need

replacement. The permanent

memory retention ensures

that your codes are stored

permanently even during

battery replacement.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargeable

(nickel-cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly and

recycle or dispose of them in accordance with Local and National

Regulations.

Features and Functions

Use the Key Charts to learn how to use the universal features and

functions of this remote.

Key Charts

The LED (red light), which is

located underneath the POWER

Key, blinks to show that the

remote control is working and

is sending signals.

Press TV, CBL, SAT, VCR,

DVD, CD, PVR, AUD, AUX1 or

AUX2 once to select a desired

home entertainment device to

control.

Press POWER once to turn

on or off the selected device.

For master power control, see

“Programming a Master Power

Macro.”

Press MENU once to display

your selected device’s main

menu.

Use GUIDE to display your

selected device’s program guide

or setup menu.

Use EXIT to exit from your

selected device’s guide or menu.

Use INFO to display the

current channel and program

information.

Use the Cursor Keys to move

the cursor in the program guide

and menu screens.

Use OK to choose options from

your selected device’s menu or

guide. In the RCVR/AMP mode,

use OK to set the surround

sound. Use the up arrow (or

down arrow ) to adjust the

volume higher (or lower).Use

the left arrow (or right arrow)

to adjust the balance left (or

right).

Use VOL + (or VOL -) to raise (or lower) the sound volume.

Press MUTE once to turn the sound off or on.

In TV, VCR, DVD, CBL, or SAT modes, use FAV to scan favorite

channels and/or all channels. (See “Using Channel Scan” and

“Programming Favorite Channel Scan.”)

Use CH + (or CH -) to select the next higher (or lower) channel.

Press PREV once to recall the last-viewed channel and to page back

one screen on the main menu. In the AUD, DVD and CD modes, use

DISC to change disk (if available on your device).

Use the keypad (1~ 9and 0) to directly select channels (e.g., 009 or

031). In the AUD mode, use the keypad (1~ 9and 0) to select audio

sources 1 through 10.

Press ENTER once after entering the channel numbers on some TVs.

In the CD mode, use ENTER to add 10 to the digit entry (e.g.,

ENTER and 7is 17).

Use INPUT to switch the TV’s input to view TV or video programs.

Use the Transport Keys to control your PVR/DVR, VCR, DVD, or CD

player, or VOD (Video On Demand) if available on your cable or

satellite service. Press REC to record a DVD or VCR program.

After programming, press M1 ~ M3 once to run a desired macro

(see “Using Macros”).

Use the L1 ~ L3 keys to learn new functions. See “Using Learning”

for the learning feature.

Use PIP to switch the Picture-In-Picture feature on or off (if

available on your TV).

Use MOVE to move the window picture to different positions in the

main picture.

Use SWAP to switch images and sound between the main and

window pictures.

Press SLEEP to activate your device’s sleep timer (not available for

all devices).

Use CC to turn on closed caption or subtitles. If you have a PVR/DVR

device, use SHOWS to access your list of recorded shows.

Use FORMAT to change the Aspect Ratio of your display

(16:9). If you have a PVR/DVR device, use LIVE to return to live

programming.

Use +100 if your device requires this key to access channels greater

than 100 (same as your original device). Use the (-) function to

access your High Deﬁnition Channels (e.g., if your HD channel is 2.5,

press 2(-) 5).

Use SET for all programming sequences.

Device Table

NOTE: Please refer to this table when performing the instructions

in “Setting Up Your Components”.

After programming, this remote will be able to control the

following types of devices:

DEVICE

KEY CONTROLS THESE DEVICES

TV TV (including HDTV, Plasma and LCD), TV/

DVD Combo, TV/VCR Combo

SAT Satellite, Satellite/PVR/DVR, Video

Accessories (Including Media Center PCs)

CBL Cable, Cable/PVR/DVR, Video Accessories

(Including Media Center PCs)

VCR VCR, DVD, DVD/R, HTIB, DVD/VCR

DEVICE

KEY CONTROLS THESE DEVICES

DVD DVD, VCR, DVD/R, HTiB, DVD/VCR

CD CD, Home Automation, CD/R (Recorders)

PVR PVR/DVR Only Devices

AUD Tuner, Amp, Misc. Audio, HTiB (Home

Theater In A Box)

AUX1 Tuner, Amp, Misc. Audio, HTiB (Home

Theater In A Box)

AUX2 Media Center PCs, Satellite, Satellite/

PVR/DVR, Cable, Cable/PVR/DVR, Video

Accessories

Setting Up Your Components

This remote is preprogrammed at the factory to operate a Sony TV,

DVD and VCR, an RCA DirecTV Satellite box, a Motorola Cable Box,

a Sony Tivo PVR, a Pioneer Receiver and CD, a Sony Receiver (in

the AUX1 Mode), and a Microsoft Media Center PC (in the AUX2

Mode). To control devices other than the default brands, perform

the following steps; otherwise skip this section.

NOTE: For Combo Device control, see the next section.

1. Turn on a device (e.g., TV, VCR or DVD player) and, if applicable,

insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before

proceeding. Highlight or write down the codes and device you

wish to program before starting step 2.

2. On the remote control, press a device key once (i.e., TV, CBL,

SAT, VCR, DVD, CD, PVR, AUD, AUX1 or AUX2).

NOTE: Use the AUX1 key to program control of an audio device

such as an AMP, HTIB (Home theater in a box), or a tuner. Use

the AUX2 key to program control of a Media Center PC (with

IR receiver). Alternately, use the AUX1 or AUX2 key to program

control of a second device type (e.g., a second VCR; see “Re-

assigning Device Keys”).

3. Press and hold SET until the LED (red light) blinks twice, then

release SET.

4. Use the accompanying code lists to locate the type of device

and brand name and then enter the ﬁrst four-digit code for

your device. If performed correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4

and enter the same code again.

5. Aim the remote control at the device and press POWER once.

The device should turn off. If it does not, repeat steps 2 through

5, trying each code for your brand until you ﬁnd one that

works. If it still doesn’t work, try “Searching for Your Code.”

NOTE: If the device does not have a POWER key, press the

(PLAY) key.

6. Repeat steps 1 through 5 for each device you want to control.

For future reference, write down each working device code in

the following boxes:

TV Code: