One Forall KAMELEON 5 Manual de usuario

Retain For Future Reference

USER GUIDE & CODE BOOK

Universal Remote

URC-7550

QUICK SET-UP

QUICK SEARCH

INSTALLING THE BATTERIES

THE KEYPAD

SETTING THE CLOCK

INSTALLATION

Setting up your TV 8

Setting up your other devices 9

The Search Method 10

SET-UP CODES

Quick Code Reference 12 CD/Mini Disc 23

Televisions 13 Miscellaneous Audio 24

Video Recorders 18 Amplifiers 24

Satellite Receivers 20 Amp/Tuners 24

Cable Converters 23

BSKYB AND ON DIGITAL INFORMATION

ADVANCED FEATURES

Controlling Colour and Brightness 26

Volume Punch-Through 26

Changing the Device Keys 27

Menu 28

Auto scan 29

Macros 31

Learning Feature 33

Key Magic 35

TROUBLE-SHOOTING

Helpful Hints 36

Consumer Help-Line 37

Table of Contents

About Your ONE FOR ALL 5

Your ONE FOR ALL 5 Package contains:

Your ONE FOR ALL 5 Remote

Your ONE FOR ALL 5 Manual

Your manual is divided into two parts: set-up instructions and

device codes. You may need this guide again in the

future, so please be sure to keep it.

Your ONE FOR ALL 5 needs 2 new “AA/LR6” batteries.

Your ONE FOR ALL 5 is designed to let you use one remote to

operate your Video and Audio equipment; any device

designed to be operated by an infrared signal. This also

includes those devices which operate over 100 kHz. You can

choose a combination of five devices you would like to

operate. Also, what makes the ONE FOR ALL 5 even more

unique is the "Learning" feature which allows you to

customise any of the special functions of your original remote

control onto the keypad of your new ONE FOR ALL.

The following pages explain in simple steps how

to customize the ONE FOR ALL 5 to your home

entertainment needs.

WWW.ONEFORALL.COM 1

Backlit

Device

Keys

Volume(-)

Menu down

Menu left

Rewind/

Text on

SP/LP/Red Record/Yellow

Stop/Green

Pause/Hold

Fast Forward/

Expand

Programme(-)

Programme(+)

Menu up

Power

Clock setting

keys

Number

Keys

Custom

Keys

Teletext Keys

Auto/Blue

Play/Text off

Menu right

Volume(+)

Mute/OK

Magic

LCD Lite Key

LCD

Quick Set-Up

The instructions below and on the next page

can be used to quickly install your new ONE

FOR ALL.

You can use the Quick Set-Up below with the

codes listed on pages 13-24. If this doesn’t

work, try the Quick Search on the next page.

The Quick Search can also be used even if

your brand is not listed at all.

Make sure you install the batteries in

your ONE FOR ALL before following the

instructions below.

Make sure your device is switched on

(not in standby).

Press device key:

Press and hold

until the device key blinks

twice (the device key will

blink once and then twice).

Then release

Enter

(4-digit code). See pages

13-24. The device key

will blink twice.

Aim remote at your

device and press

(or PLAY).

3. ____

NOTES:

- The instructions above are a “Quick”

set-up guide. For further explanation,

please refer to the pages within.

- Make sure you write your Set-Up codes

in the boxes provided on page 12 and

inside the battery compartment for

easy future reference.

VCR

AUD

or SAT

Quick Search

Aim your ONE FOR ALL at

your device and press a

device key:

Press and hold

until the device key blinks

twice. (The device key

will blink once then twice).

Press

Slowly alternate between

the device key ( )

and until your

device turns off.

When your device turns

off, press . The

device key will blink

twice. Your device is

set up.

NOTES:

- During step 4, you may have to press

these keys many times, so please be

patient.

- If the original remote control does not

have a power key, press PLAY instead

of POWER during step 4.

ie:

Make sure your device is switched on

(not in standby).

Make sure you aim your ONE FOR ALL

at your device during “Quick Search”.

VCR

AUD

or SAT

4WWW.ONEFORALL.COM

Installing the Batteries

Important notes:

-On the inside of the battery compartment door you will

find a label on which to write your Set-Up codes after

your ONE FOR ALL 5 is set up for your device. Please

write down your codes for easy, future reference.

-Do not use rechargable batteries

-Upon changing the batteries, your set-up codes and

advanced programming will be retained.

Your ONE FOR ALL 5 needs 2 new “AA/LR6” alkaline batteries.

Remove the battery cover from the

back of your ONE FOR ALL 5 by

pressing down on the tab.

Match the batteries to the + and -

marks inside the battery case, then

insert the batteries.

Press the battery cover back into

place.

Function

Magic Key

The Magic key is used to set up your ONE

FOR ALL 5 and to access special functions.

Menu Key

The Menu key (see page 28) controls the

same function as it did on your original

remote. If available on your original remote

control, this key will allow you to access the

Surround mode of your device.

Power Key

The Power key controls the same function as

it did on your original remote.

LCD

The Liquid Crystal Display features a 12 or

24 hour clock (see page 7).

The Keypad

LCD

WWW.ONEFORALL.COM 5

Function

Lite Key

This key will light up the display of your clock.

SEL and SET Keys

The SEL and SET keys are used to set up the

clock functions (see page 7)

Backlit Device Keys

The TV, VCR, SAT, CD and AUD keys select the

home entertainment device to be controlled.

For example pressing the TV key allows the

remote to control the functions of your

Television, after pressing VCR you can operate

your Video Cassette Recorder, etc. For more

detailed information, please refer to the chart

on page 6. During operation of the ONE FOR

ALL the device key will light up to indicate the

mode you are using.

Volume, Programme Keys

The Volume and Programme keys control

the two most frequently used functions of

your devices. They operate just as the keys

on your original remote. These keys are also

used to adjust colour and brightness (see

page 26 for further explanation)

Directional Keys

If available on your original remote, these

keys will allow you to navigate through the

Menu (see page 28) and the Surround Sound

mode of your device.

Mute Key

The Mute key operates the same function it

did on your orginal remote control. It is also

used to activate the Scan feature (see page

29). Also, if your original remote control

required that you press an “OK” or “ENTER”

key during Menu operation, the Mute key

can be used for this function.

Number Keys

The Number keys (0-9, 10, 20) provide

functions just like your original remote, such

as direct access programme selection. If your

original remote uses one/two digit input

switching (-/-- symbol), this function can be

obtained by pressing the -/-- key, which is the

same as the 10 key. If your original remote

has a 20 key this function can be found

under the AV key.

The AV key operates the same function it

did on your original remote control. Also, if

your original remote control required that

you press an “EXIT” key during Menu

operation, the AV key can be used for this

function. In VCR mode it obtains the TV/VCR

function.

The Keypad

-/-- 20

TV VCR SAT

AUDCD

LITE

SEL SET

Function

Video Recorder Keys

After pressing the VCR key, the Video Recorder

keys operate the functions of your Video

Recorder. To prevent accidental recordings, the

Record key must be pressed twice to start

recording.

The SP/LP key controls the tape speed function,

the AUTO key controls the auto tracking

function just like on your original remote.

Teletext and Fastext Keys

After pressing the TV key, the top row of

the VCR keys is used to operate the main

Teletext functions. The symbols below the

keys are for Teletext. The text keys are used

to access the Teletext functions of your

television. Of course, your television must have

Teletext capability.

TEXT ON Puts the television in the Teletext mode.

TEXT OFF Switches the television back to regular viewing

mode. On some televisions, this may be done

by pressing the TEXT ON key several times.

HOLD/STOP

Stops changing pages.

EXPAND Shows the top half of the Teletext page in

larger letters. By pressing again, you can see

the bottom half of the Teletext page enlarged.

To return to regular Teletext viewing, press the

EXPAND key again, or press the TEXT ON key,

depending on your television.

After pressing the TV key and accessing the

text mode, the bottom row of the Video

Recorder keys marked red, green, yellow

and blue, allow you to access the Fastext

functions of your television. Again, your

television must have fastext capability to

operate these functions. If on your original

remote control these keys are used for

Menu navigation, the ONE FOR ALL Fastext

keys may operate the same.

Custom Keys

The Custom Keys are spare keys which give you

the possibility to customize the ONE FOR ALL

remote using the Learning and Key Magic®

features (page 33 and 35). These keys can also

be used to program Macros (see page 31).

For your convenience, the ONE FOR ALL 5 comes with an

adhesive overlay to label the “custom keys”. To use the overlay:

1. Remove the label from under the door.

2. Peel off the transparent protective cover from the front.

3. Write down the appropriate functions in the white area

next to the appropriate key you have customized.

4. Peel off the backing sheet.

5. Stick the label back in place.

6WWW.ONEFORALL.COM

The Keypad

(red)

(blue)

(yellow)

(green)

SP/LP

AUTO

SP/LP

AUTO

Important note: For a more detailed explanation of Teletext and

Fastext, please refer to the manual of your television. Remember,

different televisions control Teletext and Fastext features in

different ways. Not all of the Teletext functions may be available

for your particular model.

Setting the Clock

WWW.ONEFORALL.COM 7

After having installed the batteries you will get the real time

mode on the display.

Setting the Clock

1. Press SET key 4 times.

2. Adjust the month by using the SEL key.

3. Press the SET key once.

4. Set the day, using the SEL key.

5. Press the SET key once to get the hour adjustment mode of

the real time.

6. Adjust the hour using the SEL key.

7. Press the SET key once.

8. Adjust the minutes use the SEL key.

9. When the minutes for the real time are installed, press the

SET key once, then the SEL key to exit the clock adjustment

time.

During the set up of the real time, you can choose between a

12-hour clock format and the 24-hour clock format. The "A"

denotes the A.M. of the 12-hour format the "P" denotes

the P.M. of the 12-hour format and the "H" denotes the 24-

hour format. The hour format can be changed by continuing

to press the SEL key during step 5.

Setting the Alarm

1. Press on the SET key once. The display will change to the

alarm time and blink.

2. Press the SET key again.

Use the SEL key to set the hour of the alarm time.

3. Press once the SET key.

4. Set the minutes for the alarm time using the SEL key.

5. When the alarm time is set up, press the SET key once to

exit the alarm adjustment time.

Turning the alarm/chime

on and off

The display screen will read the real time

1. Press the SET key once. The display will change to the alarm

time mode (which will blink continuously)

2. Now use the SEL key to turn off or on the chime and alarm

of your clock.

3. Press the SET key 3 times to exit this feature.

Notes:

- The Alarm time hour format will update automatically to the

real time hour format.

- When the alarm goes off you can stop it by pressing the SET key.

8WWW.ONEFORALL.COM

Setting Up Your Television

To set up the ONE FOR ALL 5 for your TV, follow the

instructions below.

Find your 4-digit Television code in the

Set-Up Code section (starting on page

13). Codes are listed by brand name. The

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario