Oki B4200 Manual de usuario

(continued on back)

Caution!

To avoid damage by static electricity

or rough handling, keep the memory

card in its packaging until you're

ready to install it.

Note: The printer has only one slot in

which to install an optional

RAM Memory card.

1. Turn off the printer, and remove the

power cord and interface cable.

2. On the back of the printer, loosen

the access panel screw and remove

the access panel.

3. Locate the slot for the card:

Caution!

To avoid damage to the RAM card,

ground yourself (touch metal) before

handling it.

4. Remove the RAM memory card

from its packaging.

5. Hold the card with the gold contact

edge down and the notched corner

(1) aimed away from you.

6. Insert the card in the slot—notched

corner (1) away from you—and

press down firmly until it snaps

into place.

The blue tab (circled) will move up

to the locked position.

7. Replace the access panel:

a. Align the tabs at the bottom of

the access panel with the slots in

the printer.

b. Swing the panel up and tighten

the screw to secure it in place.

8. Reattach the interface cord and

power cable, then turn on the

printer.

9. Print a MenuMap.

Model B4200

a. Press and release CONTROL.

The printer goes off line.

b. Press and hold CONTROL for at

least 2 seconds, but no more that

5 seconds.

The MenuMap Prints.

RAM Memory Expansion Options

for B4200 and B4300

Installation Instructions Oki 70042301

(16 MB)

Oki 70042401

(32 MB)

Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620

Phone: (856) 235-2600 Fax: (856) 222-5320 http://www.okidata.com http://my.okidata.com

Model B4300

a. Press MENU one or more times

until INFO.MENU appears on

the display.

b. Press SELECT twice.

The MenuMap Prints.

10. Check the information at the top

of the MenuMap:

– The Total Memory Size should

equal the sum of the original

printer memory (8 MB for

B4200, 16 MB for B4300) plus

the newly installed memory.

– If it does not, repeat the above

steps and be sure the memory is

in the correct slot and is pushed

in completely.

– Then reprint the MenuMap and

check the Total Memory Size

again.

OKI is a registered trademark/marca registrada/marque déposée, Oki Electric Industry Company, Inc.

58366501

Otros manuales para B4200

12

Este manual sirve para los siguientes modelos

4

Tabla de contenidos

Otros manuales de Accesorios de impresora de Oki

Manuales populares de Accesorios de impresora de otras marcas

Star Micronics

Star Micronics TSP800 Series Manual de usuario

REA

REA JET HR pro 2K Manual de usuario

HP

HP Laserjet,Color Laserjet 4si Manual de usuario

oliser

oliser MS 45 Manual de usuario

Roland

Roland DU2-64 Instrucciones y recetas

Xerox

Xerox EFI EXP6000 Manual de usuario

Canon

Canon Finisher-T1 Manual de usuario

Sharp

Sharp FO-1MK Manual de usuario

Labelmate

Labelmate PM-300 Manual de usuario

Epson

Epson T6248 Manual de funcionamiento

Epson

Epson OT-BZ20 Manual de usuario

Canon

Canon TonerRobot EP-27 Manual de usuario

Ricoh

Ricoh LCIT RT5100 Guía de inicio rápido

GBC

GBC 16 Series Manual de usuario

Canon

Canon INNER 2-WAY TRAY-E1 Manual de operación y mantenimiento

Develop

Develop SD-509 Manual de usuario

Kyocera

Kyocera KM-6230 Manual

Triumph Adler

Triumph Adler DF-710 Manual