OHAUS Catapult 1000 Manual de usuario

Quick Start Guide Catapult 1000

Ohaus Corporation www.ohaus.com iCatapult 1000 Scales Quick Start Guide

PREPARATION FOR USE

Check Power

If using AC power, be sure local line voltage

matches voltage printed on the scale’s power

adapter. If not, do not use AC power.

Connect adapter plug to input jack at rear.

To use battery power, remove battery cover

and insert three LR14 (“C”) batteries.

Allow at least five minutes warm-up time,

for scale to stabilize before operation.

SELECTING THE LOCATION:

Place on a firm, steady surface with sufficient space.

Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.

SAFETY PRECAUTIONS

For dependable operation of this product, observe the following precautions:

•Verify that the input voltage printed on the power Adapter and the plug type

matches the local power supply (if using AC power).

•Make sure that the power cord does not pose an obstacle or tripping hazard.

•Disconnect the product from the power supply when cleaning.

•Do not operate this product in hazardous or unstable environments.

•Do not drop loads on the pan.

•Use only approved accessories and peripherals, as available.

•Operate the product only under ambient conditions specified in the Instruction

Manual.

•Service should be performed by authorized personnel only.

Power Input Jack

Catapult 1000 Quick Start Guide

Catapult 1000 Scales Quick Start Guide ii Ohaus Corporation www.ohaus.com

CONTROLS

Button Functions

UNITS

Cal

Short Press

Long Press

Changes weighing unit and weighing mode.

In Dynamic Weighing Mode, starts countdown.

Starts calibration.

ON/ZERO

Off

Short Press (when off)

Short Press:(when on)

Long Press

Turns scale on.

Sets display to zero.

Turns scale off.

OPERATION

Power On: Press

All display segments appear, then the software version.

Display resets to zero.

To Zero: Press

when scale is on, display returns to zero.

To Tare: Press

with container on scale. Add mass to see NET weight.

If both sample and container are removed, display shows a negative value.

Overload: If load exceeds scale capacity, “E” appears. Remove load, scale returns to normal.

Auto Shut-Off: When running on batteries, scale turns off after four inactive minutes.

Dynamic Weighing

With platform empty, press

repeatedly until bullet • flashes.

Place a mass on the platform. The scale shows “-A-”.

(If using a container, press ZERO to tare.)

ress

to start the averaging countdown from 5 seconds.

Averaged weight appears. Bullet • stops flashing when process is complete.

Display holds until a button is pressed.

To Exit, remove mass from platform. Press

until kg or lb appears on display.

*80253136*

P/N 80253136

Stability

symbol

Battery charge

symbol

Symbols for weighing modes:

lb – Pounds

•

– Dynamic Weighing

kg – Kilograms

Negative

symbol

Otros manuales para Catapult 1000

Tabla de contenidos

Otros manuales de Escala de OHAUS

OHAUS

OHAUS Courier 3000 Manual de usuario

OHAUS

OHAUS EXPLORER Manual de usuario

OHAUS

OHAUS Explorer Balances Manual de usuario

OHAUS

OHAUS EX124 Manual de usuario

OHAUS

OHAUS HS-120 Manual de usuario

OHAUS

OHAUS Explorer E1F110 Manual de usuario

OHAUS

OHAUS Adventurer Pro AV212DM Guía de configuración

OHAUS

OHAUS CS Series Manual de usuario

OHAUS

OHAUS skx series Manual de usuario

OHAUS

OHAUS Voyager V10640 Manual de usuario

OHAUS

OHAUS TROOPER COUNT Manual de usuario

OHAUS

OHAUS 5000 Manual de usuario

OHAUS

OHAUS BW1.5US Manual de usuario

OHAUS

OHAUS VALOR 4000 Manual de usuario

OHAUS

OHAUS Scout pro Guía de instalación

OHAUS

OHAUS Sapphire JS10 Manual de usuario

OHAUS

OHAUS D31P75SD Manual de usuario

OHAUS

OHAUS SCOUT II Manual de usuario

OHAUS

OHAUS 5000 Manual de usuario

OHAUS

OHAUS Valor V11PW3 Manual de usuario

OHAUS

OHAUS TA152 Manual de usuario

OHAUS

OHAUS EX224 Manual de usuario

OHAUS

OHAUS TAJ Carat TAJ203 Manual de usuario

OHAUS

OHAUS PR Series Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario