Novell LINUX ENTERPRISE DESKTOP 10 SP2 Manual de usuario

SUSE Linux Enterprise

www.novell.com10 SP2

September23,2008 Subscription Management Tool Guide

Subscription Management Tool Guide

List of Authors: Jakub Friedl

Legal Notice

This manual is protected under Novell intellectual property rights. By reproducing, duplicating or

distributing this manual you explicitly agree to conform to the terms and conditions of this license

agreement.

This manual may be freely reproduced, duplicated and distributed either as such or as part of a bundled

package in electronic and/or printed format, provided however that the following conditions are ful-

lled:

That this copyright notice and the names of authors and contributors appear clearly and distinctively

on all reproduced, duplicated and distributed copies. That this manual, specically for the printed

format, is reproduced and/or distributed for noncommercial use only. The express authorization of

Novell, Inc must be obtained prior to any other use of any manual or part thereof.

For Novell trademarks, see the Novell Trademark and Service Mark list http://www.novell

.com/company/legal/trademarks/tmlist.html. * Linux is a registered trademark of

Linus Torvalds. All other third party trademarks are the property of their respective owners. A trademark

symbol (®, ™ etc.) denotes a Novell trademark; an asterisk (*) denotes a third party trademark.

All information found in this book has been compiled with utmost attention to detail. However, this

does not guarantee complete accuracy. Neither Novell, Inc., SUSE LINUX Products GmbH, the authors,

nor the translators shall be held liable for possible errors or the consequences thereof.

Contents

1SMT Installation 1

1.1 Installation During the Initial Installation Process . . . . . . . . . . . . 1

1.2 Installation On Top of an Already Installed System . . . . . . . . . . . 2

1.3 SMT Conguration Wizard . . . . . . . . . . . . . . . . . . . . . . 3

2Conguring SMT Using YaST 5

2.1 Activating and Deactivating SMT with YaST . . . . . . . . . . . . . . . 6

2.2 Setting NU Credentials with YaST . . . . . . . . . . . . . . . . . . . 8

2.3 Setting SMT Database Password with YaST . . . . . . . . . . . . . . . 9

2.4 Setting E-mail Addresses to Receive Reports with YaST . . . . . . . . . 10

2.5 Setting the SMT Job Schedule with YaST . . . . . . . . . . . . . . . 10

3Mirroring Installation and Update Sources Using SMT 13

3.1 Getting Mirror Credentials . . . . . . . . . . . . . . . . . . . . . 13

3.2 Managing Software Catalogs with SMT . . . . . . . . . . . . . . . . 14

3.3 The /srv/www/htdocs Structure . . . . . . . . . . . . . . . . . . . 19

3.4 Using Test Environment . . . . . . . . . . . . . . . . . . . . . . 20

4Managing Client Machines With SMT 21

4.1 Listing Registered Clients . . . . . . . . . . . . . . . . . . . . . . 21

4.2 Deleting Registrations . . . . . . . . . . . . . . . . . . . . . . . 21

4.3 Manual Registration of Clients at Novell Customer Center . . . . . . . . 22

4.4 Scheduling Periodic Registrations of Clients at Novell Customer Center . . 22

5SMT Reports 25

5.1 Report Schedule and Recipients . . . . . . . . . . . . . . . . . . . 25

5.2 Types of SMT Reports . . . . . . . . . . . . . . . . . . . . . . . 26

5.3 Report Output Formats and Targets . . . . . . . . . . . . . . . . . 26

6SMT Tools and Conguration Files 29

6.1 Important Scripts and Tools . . . . . . . . . . . . . . . . . . . . 29

6.2 SMT Conguration Files . . . . . . . . . . . . . . . . . . . . . . 37

6.3 ServerCerticates......................... 44

7Conguring Clients to Use SMT 49

7.1 Using Kernel Parameters to Access an SMT Server . . . . . . . . . . . 50

7.2 Conguring Clients Using AutoYaST Prole . . . . . . . . . . . . . . 51

7.3 Conguring Clients Using the clientSetup4SMT.sh Script . . . . . . . . . 52

7.4 Registering Clients Against SMT Test Environment . . . . . . . . . . . 53

SMT Installation

SMT is distributed as an add-on product for SUSE Linux Enterprise Server 10 SP2

system. To install it, install the SUSE Linux Enterprise Server 10 SP2 base system.

You can choose to install the SMT add-on together with your base system during the

initial installation process, or you can install the SMT add-on on top of an already in-

stalled base system at any later time.

1.1 Installation During the Initial

Installation Process

To install SMT add-on together with your base system during the initial installation

process, follow these steps:

1Start SUSE Linux Enterprise Server 10 SP2 installation as usual. For more infor-

mation, see the SUSE Linux Enterprise Server documentation.

2To include the SMT add-on product, check the Include Add-On Products from

Separate Media option in the Installation Mode dialog in the System Analysis

step and click Next.

3In the next dialog, click Add and, if you are installing SMT from a CD medium,

select CD as the source type. If you are installing from a different source, such

as NFS or HTTP, choose the appropriate source type. Click Next.

SMT Installation 1

4If you are installing from CD, insert the SMT add-on product CD. If you are in-

stalling from a different source, provide the necessary source. Click Continue.

5Conrm the SMT license agreement and click Next.

6The SMT add-on product is displayed in the overview. Continue with the instal-

lation as usual. Make sure, that the SMT: Subscription Management Tool for SLE

installation pattern is selected automatically and do not remove it.

7A two-step SMT Conguration Wizard is shown during the nal steps of the in-

stallation workow. Congure SMT as described in Section 1.3, “SMT Congu-

ration Wizard” (page 3) and continue with the SUSE Linux Enterprise Server

installation as usual.

1.2 Installation On Top of an Already

Installed System

To install SMT on top of an already installed base system, follow these steps:

1Start YaST and select Software >Add-On Product.

2If you are installing SMT from a CD medium, select CD as the source type. If

you are installing from a different source, such as NFS or HTTP, choose the ap-

propriate source type. Click Next.

3If you are installing from CD, insert the SMT add-on product CD. If you are in-

stalling from a different source, provide the necessary source. Click Continue.

4Conrm the SMT license agreement and click Next.

5Click Accept to install the SMT: Subscription Management Tool for SLE pattern.

6The SMT Conguration Wizard is launched. See Section 1.3, “SMT Conguration

Wizard” (page 3).

2Subscription Management Tool Guide

1.3 SMT Conguration Wizard

During the installation of SMT the two-step SMT Conguration Wizard is launched,

irrespective of the used installation method. Congure SMT using this wizard. However,

you will be able to change the conguration later using the YaST SMT Conguration

module.

1The Enable Subscription Management Tool service (SMT) option is checked by

default. Uncheck it only if you want to disable the installed SMT.

If the rewall is enabled, check Open Port in Firewall to allow access to the

SMT service from remote computers.

Enter your Novell Customer Center mirroring credentials in NU User and NU

Password. NU stands for Novell Update. If you do not know your Novell Cus-

tomer Center credentials, refer to Section 3.1, “Getting Mirror Credentials”

(page 13). Test the entered credentials by pressing the Test button. SMT will

connect to the Customer Center server using the provided credentials and

download some testing data.

Enter the e-mail address you have used for the Novell Customer Center registra-

tion into NCC E-mail Used for Registration.

Your SMT Server URL should contain the URL of the SMT server being cong-

ured. It is lled in automatically.

Press Next to continue to the second conguration step.

2For security reasons, SMT uses a special user in the database. Set the SMT

Database Password in the respective elds. The password should not be empty.

Enter all e-mail addresses SMT should send reports to using the Add button. You

are also able to Edit or Delete any incorrect or needless addresses.

Press Next.

3If the current MySQL root password is empty—as in any freshly installed sys-

tem— you will be asked to enter a New MySQL Root Password.

SMT Installation 3

Conguring SMT Using YaST

SMT can be activated and congured using a graphical interface. A special YaST

module has been created for this purpose. The YaST SMT Conguration module can

be used to congure mirroring credentials, SMT database passwords and e-mail address-

es to send SMT reports to, or to set the SMT job schedule, and activate or deactivate

the SMT service.

To congure SMT using the YaST SMT Conguration module, follow these steps:

1To start YaST SMT module with text (ncurses) interface, run the yast smt

command as root.

To start the YaST SMT module with graphical interface, run yast2 smt as

root or open YaST Control Center and select SMT Conguration in the Network

Services section.

2To activate SMT, check the Enable Subscription Management Tool Service

(SMT) option in the Customer Center Access tab. If you want to disable SMT,

uncheck this option. For more information about activating SMT using YaST,

see Section 2.1, “Activating and Deactivating SMT with YaST” (page 6)

3In the Customer Center Access tab, set and test credentials for the NU (Novell

Update) service. Correct credentials are necessary to enable mirroring from NU

and determine the products that should be mirrored. Also set the e-mail address

used for the registration and the URL of your SMT server. For more information,

see Section 2.2, “Setting NU Credentials with YaST” (page 8).

Conguring SMT Using YaST 5

4In the Database and Reporting tab, set the password for the SMT user in the

MySQL database and enter the e-mail addresses where reports should be sent to.

For more information, see Section 2.3, “Setting SMT Database Password with

YaST” (page 9) and Section 2.4, “Setting E-mail Addresses to Receive Reports

with YaST” (page 10).

5In the Scheduled SMT Jobs tab, set a schedule of periodic SMT jobs, such as

synchronization of updates, Novell Customer Center registration, or SMT report

generation. For more information, see Section 2.5, “Setting the SMT Job

Schedule with YaST” (page 10).

6If satised with the conguration, click Finish. YaST adjusts the SMT congu-

ration and starts or restarts necessary services.

If you want to abort the conguration and cancel any changes, click Abort.

NOTE

When the YaST SMT module applies conguration changes, it checks for

the existence of the common server certicate. If the certicate does

not exist, you will be asked whether the certicate should be created

and the YaST CA Management module will be started, if you approve.

2.1 Activating and Deactivating SMT

with YaST

YaST provides an easy way to activate or deactivate the SMT service. To activate SMT

service using YaST, follow these steps:

1Open the Customer Center Access tab of the YaST SMT Conguration module.

2Check the Enable Subscription Management Tool service (SMT) option.

NOTE

Note that if not already congured, mirroring credentials should be

congured before activating SMT. For more information about how to

6Subscription Management Tool Guide

Otros manuales para LINUX ENTERPRISE DESKTOP 10 SP2

Tabla de contenidos

Otros manuales de Software de Novell

Novell

Novell LOGIN SCRIPTS - 08-2008 Manual de usuario

Novell

Novell LINUX ENTERPRISE SERVER 10 SP3 -... Manual

Novell

Novell GROUPWISE 7 - SECURITY POLICIES Manual de usuario

Novell

Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR... Manual de usuario

Novell

Novell IDENTITY MANAGER 3.6.1 - UNDERSTANDING POLICIES... Manual de usuario

Novell

Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 -... Manual de instrucciones

Novell

Novell GROUPWISE 7 - TROUBLESHOOTING 2 Manual de usuario

Novell

Novell IDENTITY MANAGER 3.6.1 Manual de usuario

Novell

Novell IMANAGER 2.7.3 Manual de instrucciones

Novell

Novell FILE SYSTEM FACTORY 1.2.1 - ADMINISTRATION Manual de usuario

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE... Manual de servicio

Novell

Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE... Manual de instrucciones

Novell

Novell IDENTITY MANAGER DRIVER FOR ID PROVIDER 3.6.1 -... Manual de usuario

Novell

Novell LINUX ENTERPRISE DESKTOP 11 - GNOME... Manual de usuario

Novell

Novell GROUPWISE 7 - SECURITY POLICIES Manual de usuario

Novell

Novell GROUPWISE 7 - DATABASES Manual de usuario

Novell

Novell SENTINEL 6.1.1.0 - README Manual de usuario

Novell

Novell ZENWORKS PATCH MANAGEMENT 6.4 - AGENT Manual de usuario

Novell

Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE... Manual de instrucciones

Novell

Novell GROUPWISE 7 ASYNC GATEWAY - INSTALLATION AND... Manual de usuario

Novell

Novell LINUX ENTERPRISE SERVER STARTER SYSTEM Manual de usuario

Novell

Novell IFOLDER 3.7 - SECURITY ADMINISTRATION Manual de instrucciones

Novell

Novell EDIRECTORY 8.8 SP3 Manual de usuario

Novell

Novell SENTINEL RAPID DEPLOYMENT 6.1 - 06-15-2009 Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Lexmark

Lexmark Apps Manual de servicio