Novell DATA SYNCHRONIZER MOBILITY PACK - UPDATE 2 Manual de usuario

Novell Data Synchronizer Mobility Pack Update 2 1

Novell®

Novell Data Synchronizer

Mobility Pack

Update 2

Readme

November 30, 2010

1 Overview

The Novell Data Synchronizer Mobility Pack creates a new Synchronizer system that consists of the

Synchronizer services, the GroupWise Connector, and the Mobility Connector on a single server.

This Synchronizer system enables you to easily synchronize GroupWise data to mobile devices.

Update 2 of the Data Synchronizer Mobility Pack provides the following enhanced features:

Synchronizer System Update: When you update the Mobility Pack software, you also update

the Mobility database, so that all device information is retained during the update process.

GroupWise Authentication: You can configure the Mobility Connector to accept GroupWise

mailbox passwords instead of LDAP (network) passwords when mobile devices connect to the

Synchronizer system.

GroupWise Connector Monitoring: Synchronizer Web Admin now provides a Connector

Information Monitoring page for the GroupWise Connector, similar to what was already

available for the Mobility Connector.

Improved Device Blocking: The Mobility Connector Information Monitoring page displays

the traffic level for each mobile device. This assists in recognizing when a device needs to be

blocked because it is having synchronization problems. This prevents a synchronization issue

with one device from impacting performance for all other devices.

Synchronization of Attachments: When an attachment is too large to synchronize to your

mobile device, the item still includes the attachment icon and indicates that the attachment was

not downloaded because of its size.

Synchronization of Notes: You can synchronize reminder notes, discussion notes, or both.

Nightly Maintenance: Items in the Mobility database that have exceeded the age limit for

retention on mobile devices are automatically cleared from the database to maintain optimum

database performance.

For a list of the bugs that have been fixed since Update 1 of the Data Synchronizer Mobility Pack,

see Section 9, “Mobility Pack Update 2 Bug Fixes,” on page 16.

2 System Requirements

See “Data Synchronizer System Requirements” in the Novell Data Synchronizer Mobility Pack

Installation Guide.

3 Mobility Pack Update Instructions

Follow the instructions in this section to update an existing Synchronizer system.

2Novell Data Synchronizer Mobility Pack Update 2

If you are installing Novell Data Synchronizer Mobility Pack Update 2 as your initial Synchronizer

system, see Section 4, “Mobility Pack Installation Instructions,” on page 5.

Updates for the Data Synchronizer Mobility Pack software are released regularly. You can update

the Mobility Pack software while retaining the configuration of your existing Synchronizer system,

including commercially signed certificates that you have purchased.

If you update from the Novell Customer Center, you can subscribe to receive future updates through

the Novell Update channel. Or, if you update from the Novell Download Web site, you must

periodically check for future updates.

Section 3.1, “Updating from the Novell Customer Center,” on page 3

Section 3.2, “Updating from the Novell Downloads Web Site,” on page 4

NOTE: If you need to uninstall and reinstall the Mobility Pack, follow the instructions in

“Uninstalling the Mobility Pack” in the Novell Data Synchronizer Mobility Pack Installation Guide.

See also Section 5.7, “Thorough Uninstallation Required,” on page 10.

3.1 Updating from the Novell Customer Center

When you update the Mobility Pack software from the Novell Customer Center, you automatically

obtain the software through the Novell Update channel. This is a convenient way to receive regular

updates.

1Log in to the Novell Customer Center (http://www.novell.com/customercenter).

2(Conditional) If you have not already done so, obtain the product registration code for the Data

Synchronizer Mobility Pack and register to receive Mobility Pack updates.

Data Synchronizer Mobility Pack Update 2 is then delivered through the Novell Update

channel to your Synchronizer server.

3Apply Data Synchronizer Mobility Pack Update 2 to the Synchronizer server:

zypper up -r nu_novell_com:Mobility-1.0-Updates

4Run the Update script to update the Synchronizer database (

datasync

) and the Mobility

database (

mobility

) for use with the updated software:

/opt/novell/datasync/update.sh

5Restart the Synchronizer services.

6Verify that Update 2 has been applied:

cat /opt/novell/datasync/version

The version number in the

version

file should match the version number in the filename of the

ISO from which you installed Update 2. For convenience, this version number is also displayed

in Synchronizer Web Admin.

For more detailed instructions, see “Updating from the Novell Customer Center” in “Mobility Pack

Installation” in the Novell Data Synchronizer Mobility Pack Installation Guide.

Novell Data Synchronizer Mobility Pack Update 2 3

3.2 Updating from the Novell Downloads Web Site

When you update the Mobility Pack software from the Novell Downloads Web site, you manually

download and install the software whenever you choose.

1Download the Novell Data Synchronizer Mobility Pack Update 2 ISO file from Novell

Downloads (http://download.novell.com) to a convenient temporary directory on the

Synchronizer server.

IMPORTANT: The Mobility Pack Update 2 software is located on the Patches list, not the

Products list.

2Use YaST to update the Mobility Pack repository from the new ISO file:

2a Under Groups, click Software, then click Patch CD Update.

2b Follow the prompts to install the updated software from the ISO file.

3Run the Update script to update the Synchronizer database (

datasync

) and the Mobility

database (

mobility

) for use with the updated software:

/opt/novell/datasync/update.sh

4Restart the Synchronizer services.

5Verify that Update 2 has been applied:

cat /opt/novell/datasync/version

The version number in the

version

file should match the version number in the filename of the

ISO from which you installed Update 2. For convenience, this version number is also displayed

in Synchronizer Web Admin.

6Check the Novell Downloads Web site periodically for updates.

For more detailed instructions, see “Updating from the Novell Downloads Web Site” in “Mobility

Pack Installation” in the Novell Data Synchronizer Mobility Pack Installation Guide

4 Mobility Pack Installation Instructions

Follow the instructions in this section if you are installing Novell Data Synchronizer Mobility Pack

Update 2 in order to create your initial Synchronizer system. The Update 2 software is available on

the Novell Downloads Web site.

NOTE: If you need to uninstall and reinstall the Mobility Pack, follow the instructions in

“Uninstalling the Mobility Pack” in the Novell Data Synchronizer Mobility Pack Installation Guide.

See also Section 5.7, “Thorough Uninstallation Required,” on page 10.

1Make sure that the Linux server where you plan to install the Mobility Pack meets the system

requirements.

For system requirements, see “Data Synchronizer System Requirements” in the Novell Data

Synchronizer Mobility Pack Installation Guide.

For additional planning assistance, see the Data Synchronizer Mobility Pack Best Practices

Wiki (http://wiki.novell.com/index.php/Data_Synchronizer_Mobility_Pack_Best_Practices).

2If a Web server is currently running on the Synchronizer server, stop it, and preferably disable

it.

4Novell Data Synchronizer Mobility Pack Update 2

3Download the Novell Data Synchronizer Mobility Pack ISO file to a convenient temporary

directory:

3a On the Novell Downloads Web site (http://download.novell.com), click Search Patches in

the Patches box.

3b In the Standard Select field, select Data Synchronizer.

IMPORTANT: If you do not see Data Synchronizer, you are looking in the Product list,

not the Patch Finder list. Click Search Patches to the right of the Product list, then look in

the Patch Finder list.

3c Under Current Patches, click the Novell Data Synchronizer Mobility Pack Update 2 x86-

64 link to display information about the download.

3d Review the description of Update 2, then click Proceed to Download.

3e Follow the online instructions to download the Update 2 ISO file to a convenient location.

4Use YaST to install the Data Synchronizer Mobility Pack software:

4a Under Groups, click Software, then click Add-On Products.

4b Install the Data Synchronizer Mobility Pack as an add-on product.

Complete installation instructions are available in “Installing and Setting Up a Data Synchronizer

System” in the Novell Data Synchronizer Mobility Pack Installation Guide.

After you have installed Update 2, you can register in the Novell Customer Center to receive future

updates through the Novell Update channel, as described in “Updating from the Novell Customer

Center” in “Mobility Pack Installation” in the Novell Data Synchronizer Mobility Pack Installation

Guide.

5 Installation Issues

Section 5.1, “GroupWise Trusted Application Creation,” on page 8

Section 5.2, “YaST Proposal Error,” on page 8

Section 5.3, “YaST Hangs When Browsing Files in the Installation Program,” on page 8

Section 5.4, “Required Python Package Version,” on page 9

Section 5.5, “Mobility Pack Installation Program Fails on a 32-Bit/x86 Processor,” on page 9

Section 5.6, “Overhead of Extraneous Users,” on page 9

Section 5.7, “Thorough Uninstallation Required,” on page 10

5.1 GroupWise Trusted Application Creation

Before you run the Mobility Pack Installation program, you must create a GroupWise trusted

application so that the GroupWise Connector can log in to a GroupWise Post Office Agent (POA) in

order to access GroupWise mailboxes without needing personal user passwords. When you set up

the GroupWise Connector as a trusted application, you only need to fill in three fields in the Create

Trusted Application dialog box in ConsoleOne: Name, Location for Key File, and Name of Key File.

Do not fill in any other fields. If you fill in additional fields, the trusted application does not work

correctly with the GroupWise Connector.

Novell Data Synchronizer Mobility Pack Update 2 5

5.2 YaST Proposal Error

When you run the Data Synchronizer Mobility Pack Installation program in YaST, you might see the

following error:

The proposal contains an error that must be resolved before continuing

This error indicates that you clicked Next without providing the configuration information for your

Synchronizer system. Instead of clicking Next, click Change > Mobility Pack Configuration, then

provide the configuration as prompted. After you provide the configuration information, click Next.

5.3 YaST Hangs When Browsing Files in the Installation

Program

When you run the Data Synchronizer Mobility Pack Installation program on SLES 11 SP1, if you

browse to and select a file, the Installation program might hang. This can occur if you try to browse

to and select any of the following files during installation:

Mobility Pack ISO file

GroupWise trusted application key file

Certificate file

As a workaround, type the full path and filename for the file instead of browsing to it.

5.4 Required Python Package Version

If you already have Python packages installed on the server where you are installing the Data

Synchronizer Mobility Pack, the Data Synchronizer Mobility Pack Installation program needs to

update the existing packages, rather than install new packages. This does not happen by default.

When you run the Installation program, you are prompted if packages need to be updated. Enter

for

Solution 1

to update each package.

5.5 Mobility Pack Installation Program Fails on a 32-Bit/x86

Processor

The Mobility Pack must be installed on a server with a 64-bit/x86 processor. If you try to install it on

a server with a 32-bit/x86 processor, the Mobility Pack Installation program does not detect the

problem. It tries to run, but it cannot run correctly.

If the behavior of the Mobility Pack Installation program does not match the installation instructions

provided in the Novell Data Synchronizer Mobility Pack Installation Guide, make sure that you are

installing the Mobility Pack on a server that meets the documented system requirements.

There are currently no plans to make the Mobility Pack available in a 32-bit version.

6Novell Data Synchronizer Mobility Pack Update 2

5.6 Overhead of Extraneous Users

When you add users to your Synchronizer system, data is automatically synchronized from

GroupWise to the GroupWise Connector before users connect their mobile devices to your

Synchronizer system. Do not add users to your Synchronizer system who do not have mobile

devices. Extraneous users create unnecessary synchronization traffic in your Synchronizer system.

5.7 Thorough Uninstallation Required

The standard uninstallation procedures provided in “Uninstalling the Mobility Pack” in the Novell

Data Synchronizer Mobility Pack Installation Guide occasionally fail to completely uninstall the

Mobility Pack because of various server-specific issues. When the Mobility Pack software is not

completely uninstalled, the next installation does not proceed normally. For example, you might

encounter problems configuring LDAP access during installation. To ensure that the Mobility Pack

software has been completely uninstalled, perform the following checks:

In YaST, click Software > Add-On Products. The Mobility Pack should not be listed. If it is still

listed, select it, then click Delete.

In YaST, click Software > Software Repositories. The Mobility Pack repository should not be

listed. If it is still listed, select it, then click Delete.

IMPORTANT: If you do not remove the existing Mobility Pack repository, you cannot

successfully install the next version of the Mobility Pack software.

In YaST, click Software > Software Management. In the Filters drop-down list, select Patterns.

Under the Primary Functions heading, the Mobility Pack should not be listed. If it is still listed,

select it. Review the Packages list for any packages that were not successfully uninstalled and

uninstall them.

In YaST, click Software > Software Management. In the Search field, specify

datasync

, then

click Search. The Packages list should be empty. If any Data Synchronizer packages are still

listed, uninstall them.

Log in as

root

in a terminal window, then check for Data Synchronizer RPMs:

rpm -qa | grep datasync

If any Data Synchronizer RPMs are still installed, uninstall them:

rpm -e rpm_name.rpm

Make sure that none of the following directories still exist on your server:

/opt/novell/datasync

/etc/datasync

/etc/init.d/datasync*

/var/lib/datasync

/var/log/datasync

/var/run/datasync

/var/lib/pgsql

If any of these directories still exist, delete them.

After performing all these checks, reboot the Synchronizer server.

Remove the Synchronizer certificate from any workstations where you have run Synchronizer

Web Admin. For example, in Firefox, click Tools > Options > Advanced > Encryption > View

Certificates. Select the certificate named

DataSync Web Admin

, then click Delete.

Novell Data Synchronizer Mobility Pack Update 2 7

6 Data Synchronizer Issues

Section 6.1, “Sync Engine Restart Stops All Connectors,” on page 12

Section 6.2, “Users and Groups Not Displayed Correctly in Synchronizer Web Admin,” on

page 12

Section 6.3, “Synchronizer Web Admin Responsiveness,” on page 12

Section 6.4, “Illegal Server Error in Synchronizer Web Admin,” on page 12

Section 6.5, “Connector Configuration Settings,” on page 13

Section 6.6, “Internet Explorer 8 Compatibility,” on page 13

Section 6.7, “GroupWise Mobile Server Compatibility,” on page 13

6.1 Sync Engine Restart Stops All Connectors

When the Sync Engine is stopped or restarted, it forces all connectors to stop. After the Sync Engine

is restarted, restart the Connector Manager service. After the Connector Manager service is

restarted, restart each connector in Synchronizer Web Admin or configure the connectors to start

automatically.

6.2 Users and Groups Not Displayed Correctly in Synchronizer

Web Admin

When you add or delete a large number of users or groups, the Manage Users page or the Manage

Groups page might not correctly display the presence or absence of the users or groups. Refresh the

page in your browser to correctly display the users or groups.

6.3 Synchronizer Web Admin Responsiveness

After you add a large number of users to the GroupWise Connector, the responsiveness of

Synchronizer Web Admin might diminish each time you restart the GroupWise Connector. For

example, it might take longer to log in to Synchronizer Web Admin or you might not be able to

navigate easily between pages while the GroupWise Connector is starting. This occurs because the

GroupWise Connector verifies all of the users each time it starts. After the user verification process

is completed, Synchronizer Web Admin behaves normally.

6.4 Illegal Server Error in Synchronizer Web Admin

You might occasionally see an Illegal Server Error when you log in to Synchronizer Web Admin

immediately after stopping and starting the Synchronizer services and connectors. This occurs if the

GroupWise Connector is not completely started when you access Synchronizer Web Admin. The

GroupWise Connector must process any accumulated events before it is ready to provide connector

status information to Synchronizer Web Admin. After the GroupWise Connector is completely

started, the Illegal Server Error no longer occurs.

8Novell Data Synchronizer Mobility Pack Update 2

6.5 Connector Configuration Settings

On the Connector Configuration Settings pages for the GroupWise Connector and the Mobility

Connector, if you set and save general connector settings, then set and save connector-specific

settings, the general connector settings are not actually saved. However, if you set and save

connector-specific settings, then set and save general connector settings, all changed settings are

saved as expected.

6.6 Internet Explorer 8 Compatibility

If you use Synchronizer Web Admin on Internet Explorer 8, you must enable Compatibility View in

order to display the Sync Engine Advanced options on the Engine Settings page.

1In Internet Explorer 8, click Tools, then select Compatibility View.

Even with Compatibility View enabled, the Maintenance section on the Engine Settings page

sometimes disappears when you mouse over it. However, with persistent mousing, it is still possible

to click Clear Cache.

6.7 GroupWise Mobile Server Compatibility

Novell Data Synchronizer is the replacement for GroupWise Mobile Server (GMS). These two

synchronization solutions can coexist successfully, as long as users are transitioned from GMS to

Synchronizer in a timely manner. An issue with GMS can cause a user whose mobile device is

configured to use both synchronization solutions to occasionally receive a large quantity of

extraneous items. As you add users to Synchronizer, you should delete them from GMS. You can

continue to run GMS indefinitely to support users with older mobile devices that are not supported

by Synchronizer.

7 Connector Issues

Section 7.1, “General Connector Issues,” on page 14

Section 7.2, “Connector-Specific Issues,” on page 15

7.1 General Connector Issues

“User Deletion” on page 14

“Connector Does Not Stop” on page 14

“Multiple Instances of the Same Connector” on page 15

7.1.1 User Deletion

In order to delete users from a connector, the connector must be running. If the connector is not

running, some user event data is not properly deleted.

Novell Data Synchronizer Mobility Pack Update 2 9

7.1.2 Connector Does Not Stop

When you stop a connector in Synchronizer Web Admin and then start it again immediately, the

status might indefinitely remain as Starting. This can happen because the connector did not

completely stop before you tried to restart it. The connector might have been completing a polling

cycle before shutting down, even though Synchronizer Web Admin displayed the status as Stopped.

When you try to start a connector that is still shutting down, it cannot start normally.

To restart the connector when this situation has occurred:

1Restart the Connector Manager on the command line:

rcdatasync-connectors restart

This should change the connector status in Synchronizer Web Admin from Starting to Stopped.

2Start the connector in Synchronizer Web Admin.

3Start any other connectors that stopped as a result of restarting the Connector Manager.

Some connectors restart automatically when the Connector Manager restarts.

If this problem occurs repeatedly, wait a few seconds between the time when you stop the connector

and when you start it again to allow the connector to shut down completely before restarting.

7.1.3 Multiple Instances of the Same Connector

Synchronizer Web Admin allows you to manually create multiple instances of the same connector.

However, this configuration is not currently supported.

If you have more users than a single connector can service, you can install one or more additional

instances of the Mobility Pack until all users are being successfully serviced. Users can be organized

on multiple instances of the Mobility Pack based on various schemes such as the location of the

users, the location of the synchronized applications, or the desired quality of service (executives vs.

regular employees, for example). Instances of the Mobility Pack do not need to mirror the structure

of your GroupWise system.

7.2 Connector-Specific Issues

Refer to the Readme for each connector on the Novell Data Synchronizer Connectors

Documentation Web site (http://www.novell.com/documentation/datasync_connectors1).

8 GroupWise 8.0.2 Issues

The Mobility Pack depends on the GroupWise Connector and a GroupWise POA for much of its

functionality. GroupWise 8.0.2 is required for use with the Mobility Pack. However, GroupWise

8.0.2 was released with some issues that impact Mobility Pack functionality. Fixes for these issues

will be available in an upcoming GroupWise 8.0.2 hot patch. For a list of GroupWise 8.0.2 issues,

see the GroupWise Connector Readme for Data Synchronizer Mobility Pack Update 2 (http://

www.novell.com/documentation/datasynchronizer1/datasync1_readme_mobility_upd2/data/

datasync1_readme_mobility_upd2.html).

10 Novell Data Synchronizer Mobility Pack Update 2

9 Mobility Pack Update 2 Bug Fixes

For a list of the bugs that have been fixed in Novell Data Synchronizer Mobility Pack Update 2, see

the Novell Data Synchronizer Mobility Pack Update 2 Bug Fix List (http://www.novell.com/

documentation/datasynchronizer1/resources/datasync1_bugfixlist_upd2.html).

You can look up the bug numbers in Bugzilla (https://bugzilla.novell.com) for more information

about each bug.

10 Documentation

Novell Data Synchronizer Mobility Pack documentation is available at the Novell Data

Synchronizer Documentation Web site (http://www.novell.com/documentation/datasynchronizer1):

Novell Data Synchronizer Mobility Pack Readme

Novell Data Synchronizer installation and administration guides

Novell Data Synchronizer connector documentation is available at the Novell Data Synchronizer

Connector Documentation Web site (http://www.novell.com/documentation/datasync_connectors1)

Connector Readmes

Connector Quick Starts

Connector installation and configuration guides

In addition to the Data Synchronizer product documentation, the following resources provide

additional information about Data Synchronizer:

Novell Support and Knowledgebase (http://www.novell.com/support)

Data Synchronizer Support Forum (http://forums.novell.com/novell-product-support-forums/

data-synchronizer)

Data Synchronization Cool Solutions (http://www.novell.com/communities/coolsolutions/

datasynchronizer)

Data Synchronizer Mobility Pack Best Practices Wiki (http://wiki.novell.com/index.php/

Data_Synchronizer_Mobility_Pack_Best_Practices)

Data Synchronizer Mobility Connector Wiki (http://wiki.novell.com/index.php/

Data_Synchronizer_Mobility_Connector)

11 Legal Notices

Novell, Inc. makes no representations or warranties with respect to the contents or use of this

documentation, and specifically disclaims any express or implied warranties of merchantability or

fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication

and to make changes to its content, at any time, without obligation to notify any person or entity of

such revisions or changes.

Further, Novell, Inc. makes no representations or warranties with respect to any software, and

specifically disclaims any express or implied warranties of merchantability or fitness for any

particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of

Novell software, at any time, without any obligation to notify any person or entity of such changes.

Tabla de contenidos

Otros manuales de Software de Novell

Novell

Novell NETWARE 6-DOCUMENTATION Manual de usuario

Novell

Novell IDENTITY MANAGER 3.6.1 - CLIENT LOGIN EXTENSION... Manual de usuario

Novell

Novell ZENWORKS APPLICATION VIRTUALIZATION 8.0 -... Manual de usuario

Novell

Novell IFOLDER 3.8 - DEPLOYMENT Guía de referencia rápida

Novell

Novell OPEN ENTERPRISE SERVER 2 SP2 - PLANING AND IMPLEMENTATION GUIDE... Manual de usuario

Novell

Novell LINUX ENTERPRISE 11 - HIGH AVAILABILITY Manual de usuario

Novell

Novell IDENTITY MANAGER 3.6.1 - PASSWORD MANAGEMENT Manual de usuario

Novell

Novell APPARMOR - AND Manual de usuario

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE... Manual de servicio

Novell

Novell GROUPWISE 8 - RESOURCES Manual de usuario

Novell

Novell SENTINEL LOG MANAGER 1.0.0.4 - S Manual de instrucciones

Novell

Novell GROUPWISE 7 - TROUBLESHOOTING 2 Manual de usuario

Novell

Novell CLIENT FOR LINUX 2.0 SP3 Manual de instrucciones

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE... Manual de usuario

Novell

Novell OPEN ENTERPRISE SERVER 2.0 SP2 - DOMAIN SERVICE FOR... Manual de instrucciones

Novell

Novell EDIRECTORY 8.8 SP2 - GUIDE 10-2007 Manual de usuario

Novell

Novell IDENTITY ASSURANCE SOLUTION 3.0.2 -... Manual de usuario

Novell

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ... Manual de usuario

Novell

Novell OPEN ENTERPRISE SERVER CLUSTER SERVICES 1.8.2 -... Manual de usuario

Novell

Novell IDENTITY MANAGER ENTITLEMENTS SERVICE DRIVER 3.6.1 -... Manual de usuario

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 -... Manual de instrucciones

Novell

Novell GROUPWISE 7 - POST OFFICE AGENT Manual de usuario

Novell

Novell LINUX ENTERPRISE 10 SP1 - LINUX AUDIT Manual de usuario

Novell

Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Lexmark

Lexmark Apps Manual de servicio