Nortel Symposium Agent Manual de usuario

Nortel Networks Symposium Agent

Planning and Engineering Guide

Product release: 2.3

Document release: Standard 2.0

Date: June 2001

Nortel Networks Symposium Agent

Planning and Engineering Guide

Product release: 2.3

Document release: Standard 2.0

Date: June 2001

Information is subject to change without notice. Nortel Networks reserves the right to make

changes in design or components as progress in engineering and manufacturing may warrant.

The process of transmitting data and call messaging between the Meridian 1 and the Symposium

Agent is proprietary to Nortel Networks. Any other use of the data and the transmission process is

a violation of the user license unless specifically authorized in writing by Nortel Networks prior to

such use. Violations of the license by alternative usage of any portion of this process or the

related hardware constitutes grounds for an immediate termination of the license and Nortel

Networks reserves the right to seek all allowable remedies for such breach.

DMS, MERIDIAN 1, MERIDIAN LINK, MSL-100, NORTEL NETWORKS, and SYMPOSIUM are

trademarks of Nortel Networks. INTERNET EXPLORER, WINDOWS, and WINDOWS NT are

trademarks of Microsoft Corporation. Sybase is a trademark of Sybase Corporation.

Standard 2.0

iv Nortel Networks Symposium Agent

Publication history

November 1999 This is the standard 1.0 release of the Nortel Networks Symposium

Agent Planning and Engineering Guide Release 2.0.

June 2001 This is the standard 2.0 release of the Nortel Networks Symposium

Agent Planning and Engineering Guide Release 2.3.

Planning and Engineering Guide v

Contents

Getting started 7

About this guide ........................................................................................................... 8

Overview ...................................................................................................................... 9

Considerations for planning and engineering .............................................................. 9

System components................................................................................................... 10

Technical support....................................................................................................... 12

System configurations 13

Introduction ................................................................................................................ 14

Standalone configuration ........................................................................................... 14

Coresident configuration ............................................................................................ 16

Symposium Agent switch connectivity....................................................................... 17

Understanding server performance 19

Introduction ................................................................................................................ 20

Key performance factors............................................................................................ 20

Understanding client features 23

Introduction ................................................................................................................ 24

Client software features ............................................................................................. 24

CPU usage 29

Introduction ................................................................................................................ 30

Load Testing and Data Collection.............................................................................. 31

Load Tests and Hardware/Software Configuration.................................................... 32

Results ....................................................................................................................... 32

CPU Loading Measurement Data .............................................................................. 33

CPU Loading Model ................................................................................................... 34

Summary.................................................................................................................... 36

Standard 2.0

vi Nortel Networks Symposium Agent

Planning and Engineering Guide 7

Chapter 1

Getting started

In this chapter

About this guide 8

Overview 9

Considerations for planning and engineering 9

System components 10

Technical Support 12

Getting started Standard 2.0

8 Nortel Networks Symposium Agent

About this guide

Introduction

The Symposium Agent Release 2.3 Planning and Engineering Guide provides

information for selecting and planning your Symposium Agent system.

Who should use this guide

Information in this document is intended for technical planning and purchasing

personnel who are responsible for determining the requirements for installing and

operating a Symposium Agent system in their organization.

Skills you need

You need knowledge and experience of products not covered in this document.

Nortel Networks product knowledge

! Meridian 1 Option 11-81 PBX or DMS-100 or MSL-100

! Symposium TAPI Service Provider for M1

! Symposium Call Center Server or Symposium Express Call Center Server

! Symposium CompuCall TAPI Server or Symposium TAPI Driver for ICM

PC experience or knowledge

! Microsoft Windows NT Workstation and Windows NT Server

! Microsoft Windows 2000 Server and Microsoft Windows 2000 Professional

! Microsoft Internet Explorer 4.0

! Microsoft Internet Information Server

! Microsoft Windows 95

! Microsoft Windows 98

! Microsoft Transaction Server

! Sybase Adaptive Server

Other experience or knowledge

! network management

! client-server systems

! Microsoft Telephony Application Programming Interface (TAPI 2.1)

For further information

! Symposium TAPI Service Provider Release 2.2 for Meridian 1, GRB-116

! Symposium TAPI Driver for ICM Product Service Introduction (PSI)

June 2001 Getting started

Planning and Engineering Guide 9

# 50193.16/04-99 Issue 1

! Symposium Agent 2.3, Sales and Marketing Bulletin # 1260-G

! Symposium Agent 2.3 General Release Bulletin

! Reference Guide for Installing, Configuring, and Maintaining the Symposium

TAPI Service Provider for Meridian 1 Release 2, Publication ID 881938

! Symposium Agent 2.3 Installation Guide, available as a .pdf file on the

Symposium Agent 2.3 CD-ROM

! Symposium Agent 2.3 online Help in HTML format

The online Help includes information for administering the system after the

installation and initial setup. The Help topics, reference information, and brief

tutorials appear in a Table of Contents that you can open using your browser.

The Help topics are also indexed by keywords.

Before using the online Help, you may need to relax your browser security for

the Intranet (not Internet) zone to allow the use of the ActiveX control that

provides the Help Table of Contents. For instructions on browser security

settings, see the section called "Running the Symposium Agent administration

tool."

Neither the Symposium Agent 2.3 Installation Guide nor the online Help is

sold or distributed in paper copy.

Overview

The Symposium Agent server can be set up in two configurations. In the first

configuration, as a standalone server, the Symposium Agent Server software

resides on the server platform by itself. The second configuration combines the

Symposium Agent server software and the TAPI Service Provider (M1 TAPI SP,

CompuCall TAPI Driver or TAPI Driver for ICM) on the same server platform.

The information contained in this document explains how to plan for each

configuration.

Considerations for planning and engineering

Planning and engineering involves determining the best size, platform, and

location for your Symposium Agent system.

To start planning and engineering a Symposium Agent system, consider the

Getting started Standard 2.0

10 Nortel Networks Symposium Agent

following questions:

! Will Symposium Call Center Server or Symposium Express Call Center

Server route calls to your Symposium Agent users?

! What is the LAN connectivity for the PCs?

! What applications will you want users to screen pop on, and which data

(Calling Number, Called Number/DNIS or Call/User Data) will be used to

trigger the screen pops?

! Will the client PC be equipped with Windows 95,Windows 98, Windows NT

4.0 Workstation, or Windows 2000 Professional?

! How are your network domains currently set up and how will the domain

requirements imposed by TAPI SP and Symposium Agent impact the current

network?

! Where will the servers be located and how will they be connected?

! Will you use your own web server to support your application(s) or will you

use Internet Information Server? Which server will Symposium Agent uses as

it’s web server? (If you use Symposium Agent’s server as your web server,

you may require a faster machine with more memory and larger disk drive.)

! Do you want screen pops to occur before calls are answered (when the agent's

phone is ringing), when the call is answered/connected, or after the call ends?

! What is the maximum number of calls per hour the call center will handle?

! What is the number of concurrent users?

System components

Key components

A Symposium Agent system consists of five key components:

1) Switch components Meridian 1 Option 11C and Options 51C

through 81C or MSL-100 or DMS-100 are

supported.

2) Symposium Agent Server The Symposium Agent Server software and

Telephony Server (TAPI SP) software can

3) Telephony Server (TAPI Server) reside on separate Windows NT 4.0 or

Windows 2000 servers

or on the same server.

4) Administrative PC The Administrative PC is used to configure

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de Nortel

Nortel

Nortel Voice Mail Guía de inicio rápido

Nortel

Nortel Optivity Switch Guía

Nortel

Nortel jAZZ X-6000 Manual de usuario

Nortel

Nortel INM 5.0 Manual técnico

Nortel

Nortel CTI ToolKit Manual de usuario

Nortel

Nortel TAPI Manual de usuario

Nortel

Nortel NA Manual de operación

Nortel

Nortel Agent Manual de usuario

Nortel

Nortel CC MIS Manual de usuario

Nortel

Nortel N0035509 Manual de usuario

Nortel

Nortel ICB Manual de usuario

Nortel

Nortel Observe Manual de usuario

Nortel

Nortel Call Center Telephone Manual

Nortel

Nortel TAPI Manual de usuario

Nortel

Nortel ALTEON OS BMD00007 Manual de instalación

Nortel

Nortel AS 5300 Manual de usuario

Nortel

Nortel Attendant PC Manual de usuario

Nortel

Nortel Configuration Manager Guía rápida

Nortel

Nortel LinkPlexer Manual del operador

Nortel

Nortel Viewer Manual de usuario

Nortel

Nortel VoIP Gateway Guía de inicio rápido

Nortel

Nortel Norstar ICS Remote Tools 11 Manual de usuario

Nortel

Nortel BCM 4.0 Manual de instalación y operación

Nortel

Nortel Configuration Manager Guía rápida

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario