Multitech MultiModem II Manual de usuario

MultiModem®II

Data/Fax Modem

MT5600BA-V92

Quick Start Guide

Downloaded from Elcodis.com electronic components distributor

MultiModem II Quick Start Guide

2 Multi-Tech Systems, Inc.

Quick Start Guide

MT5600BA-V92 Data/Fax Modem

82100142L Rev. C

This publication may not be reproduced, in whole or in part, without prior

Multi-Tech Systems, Inc. makes no representations or warranty with respect to the

contents hereof and specifically disclaims any implied warranty of merchantability

or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.

reserves the right to revise this publication and to make changes from time to time

in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any

person or organization of such revisions or changes. Check Multi-Tech’s Web site

for current versions of our product documentation.

Revision Date Description

A 08/17/06 Initial release.

B 05/03/07 Updated Technical Support contact list.

C 09/23/08 Updated Technical Support contact list,

procedures for UL Recertification, and

driver installation procedure.

Trademarks

Multi-Tech, the Multi-Tech logo, and MultiModem are registered trademarks of

Multi-Tech Systems, Inc. All other brand and product names mentioned in this

publication are trademarks or registered trademarks of their respective companies.

Technical Support

Country By Email By Phone

Europe, Middle East, Africa: support@multitech.co.uk +(44) 118 959 7774

U.S., Canada, all others: support@multitech.com 800 972-2439 or

763-717-5863

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112

Phone: 763-785-3500 or 800-328-9717

Fax: 763-785-9874

http://www.multitech.com

Downloaded from Elcodis.com electronic components distributor

MultiModem II Quick Start Guide

Introduction

This Quick Start Guide will help you set up your modem. A User Guide

containing detailed configuration information and a separate AT

Commands Reference Guide can be found on the MultiModem II CD

shipped with your modem.

Safety Warnings

•Use this product only with UL- and CUL-listed computers (US).

•Never install phone wiring during a lightning storm.

•Never install a phone jack in a wet location unless the jack is

specifically designed for wet locations.

•Never touch uninsulated phone wires or terminals unless the

phone line has been disconnected at the network interface.

•Use caution when installing or modifying phone lines.

•Avoid using a phone during an electrical storm; there is a risk of

electrical shock from lightning.

•Do not use a phone in the vicinity of a gas leak.

•To reduce the risk of fire, use only 26 AWG or larger telephone

line cord.

•The telephone cord is to be disconnected before accessing the

inside of the equipment.

Modem Installation

Step 1 – Connect the Modem the PC

Downloaded from Elcodis.com electronic components distributor

MultiModem II Quick Start Guide

4 Multi-Tech Systems, Inc.

Connect the Modem to Your PC

Plug one end of the serial cable into the modem’s RS-232

connector.

Plug the other end into your PC’s serial port connector (COM1 or

COM2).

Connect the Modem to the Telephone Line (Dialup Connection)

Plug one end of the phone cable into the modem’s LINE jack.

Plug the other end into a public switched telephone network

(PSTN) wall jack.

Important: The LINE jack and PHONE jack are not

interchangeable. Do not plug the phone into the LINE jack and

do not plug the leased line cable into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on

equipment connected to public telephone systems.

Two-Wire or Four-Wire Leased Line Connection

Plug one end of a two-wire/four-wire phone cable into the modem’s

LEASED jack.

Connect the other end to a leased line wall jack or terminals.

Connect the Phone to the Modem (Optional)

For voice calls, plug a telephone into the modem’s PHONE jack.

Connect the Modem to the AC Power Outlet

Plug the power transformer into an AC power outlet or power strip.

Plug the power transformer’s cable into the POWER jack on the

modem. Use only the power transformer supplied with the modem.

Use of any other transformer voids the warranty and can damage

the modem.

Power-On Test

Test the modem by turning it on (a power switch is located on the

front panel). When you apply power, the modem performs a di-

agnostic self-test, indicated by the TM indicator lighting for a few

seconds, after which the LCD should light. If this does not happen,

check that the power switch is on, the power transformer is solidly

connected, and the AC outlet is live. If these measures do not work,

see the “Troubleshooting” chapter in the User Guide.

Downloaded from Elcodis.com electronic components distributor

MultiModem II Quick Start Guide

Step 2 – Install the Modem Driver

If you use Windows 2000 or newer, you must install the modem driver.

The modem driver tells Windows how to control the modem. If you use a

Linux operating system, please refer to the User Guide for installation

instructions.

1. With your computer turned off, ensure that your modem is

connected properly, and then turn on your computer. Upon

booting up the computer should detect the modem and open

Welcome to the Found New Hardware Wizard screen. On this

screen, select Install from a list or specific location. Click Next.

2. On the Found New Hardware Wizard screen, check Search for

the best driver in these locations and Install from a specific

location. Do Not click Next at this point.

3. Insert the MultiModem product CD into your CD-ROM drive, when

the MultiModem main screen appears, click Exit. Now, click Next

on the Found New Hardware screen.

4. On the Found New Hardware Wizard screen, click on Search for

the best driver in these locations and Search removable

media. Click Next. Windows installs the modem driver.

5. Click Finish to exit.

Step 3 - Setting Your Country or

Region Code

The MT5600BA-V92 modem is a global modem - it can be used all over

the world.

However, countries or regions vary in their requirements for how a

modem functions. Therefore, you must configure yours to match the

defaults of the country or region in which you are using it. Choose from

any of the three methods:

•Using the LCD Panel to Set Your Country or Region Code

•Using the Global Wizard to Set Your Country or Region Code

•Using AT Commands to Set Your Country or Region Code – Refer

to the User Guide

Downloaded from Elcodis.com electronic components distributor

MultiModem II Quick Start Guide

6 Multi-Tech Systems, Inc.

Using the LCD Panel

Country or Region Codes

A list of country/region codes can be found on the Multi-Tech Web

site at:

http://www.multitech.com/PRODUCTS/Info/approvals

Then click on global modems. The Global Modem Country

Approvals page displays. On this page you can view approvals,

configuration strings and responses by country and products.

Downloaded from Elcodis.com electronic components distributor

MultiModem II Quick Start Guide

Using the Global Wizard

The Global Wizard configuration utility is recommended for

computers running in Windows. The Wizard can configure your

modem for a specific country or region with just a few mouse clicks.

1. Insert the MultiModem Product CD into the CD-ROM drive. The

Autorun dialog box appears.

2. Click Initial Setup and Country/region Selection.

3. Choose either:

•Run Global Wizard from CD. This will not load the wizard

onto your hard drive, or

•Install Global Wizard on the HD. This will install the

wizard onto your hard drive for future use.

4. The Global Wizard dialog box appears. Click Next.

5. The Wizard searches for your modem and identifies it. Click

Next.

6. Select the country/region in which the modem will be used.

Click Next.

7. Review your choice of country/region. If it is correct, click Next

to configure the modem.

8. When Global Wizard announces that the parameters have been

set, click Finish to exit.

Step 4 – Install Communications

Software

Data communications software is designed to send and receive

messages. Multi-Tech includes PhoneTools, a communications software

program with your modem. However, the modem will work with other

data communications software, such as HyperTerminal.

To install PhoneTools, insert the CD into the CD-ROM drive; click the

PhoneTools icon. You will be asked to choose your language. The

software automatically loads onto your PC. See the PhoneTools user

documentation included with the PhoneTools software.

Downloaded from Elcodis.com electronic components distributor

82100142L

Patents

This device is covered by one or more of the following patents:

6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567;

5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627;

5,754,589; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030;

5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725;

5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470;

5,463,616; 5,453,986; 5,452,289; 5,450,425; D353,598; 5,355,365;

5,309,562; 5,301,274. Other patents pending.

Downloaded from Elcodis.com electronic components distributor

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Módem de Multitech

Multitech

Multitech MultiModem MTCBA-E-GP Manual de usuario

Multitech

Multitech MultiModem ZBA Series Manual de instalación

Multitech

Multitech MultiModem ISI5634UPCI-4 Manual de funcionamiento

Multitech

Multitech MT2834BA Manual de usuario

Multitech

Multitech SocketModem GSM Instrucciones de instalación

Multitech

Multitech MultiModem ZPX Manual de usuario

Multitech

Multitech MULTI MODEM II MT5600BL Manual de usuario

Multitech

Multitech MultiModem iCell Manual de usuario

Multitech

Multitech MultiModem MT5634ZBA-V-V92 Manual de usuario

Multitech

Multitech etherFAX A2E Manual de usuario

Multitech

Multitech V.92 Desktop Modems MultiModem ZDX Manual de usuario

Multitech

Multitech 5634 Series Manual de usuario

Multitech

Multitech MultiConnect microCell MTCM-LNA3 Manual de usuario

Multitech

Multitech MT202TD Manual de usuario

Multitech

Multitech MTE-Series Manual de usuario

Multitech

Multitech MT56DSU-S Manual de usuario

Multitech

Multitech MultiMobile MT128ZLX-ST/NT Manual de usuario

Multitech

Multitech QuickCarrier USB-D MTD-MVW1 Manual de usuario

Multitech

Multitech MultiModem MTCBA?H3?U1 Manual de usuario

Multitech

Multitech MultiModem II MT5600BA-V.92 Manual de usuario

Multitech

Multitech QuickCarrier USB-D Manual de usuario

Multitech

Multitech MessageSaver MT5634MSV Manual técnico

Multitech

Multitech Multimodem MTCBA-G-F1 Manual de usuario

Multitech

Multitech MultiConnect MicroCell MTCM-LAT3 Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario