Multitech MT128STZLX Manual del operador

Update–ISDN CAPI 1

MT128STZLX

Product Update

ISDN CAPI 2.0

March 27, 1998

PN 82081400

Update–ISDN CAPI

Contents

1. Introduction .........................................................1

2. Preparation .........................................................2

3. RVS-COM Lite Installation ..................................3

4. Applications ........................................................6

4.1 Using PPP Protocol to Connect to ISPs .......6

4.2 Using Multi-Link PPP to Connect to ISPs .....7

4.3 Making X.75 Connections ............................8

4.4 EuroFile Transfer Applications ......................9

4.5 G3 Faxing Applications .............................. 11

4.6 Voice Applications...................................... 12

Update–ISDN CAPI 1

1. Introduction

This update explains how to make the ISDN TA PC

Card (with DSS1 D-channel protocol) work with

RVS-COM Lite for Windows 95/NT, which supports

CAPI 2.0, X.75, and other popular applications in

most western European countries.

After RVS-COM Lite is installed, you can find RVS-

COM application details in Online Documentation.

NOTE:

If ACOTEC ISDN for Windows 95 is installed

in your system, remove it completely to avoid any

problems that could occur with this installation.

The ISDN TA PC Card supports CAPI drivers. With

optional CAPI-based software like RVS-COM Lite, it

not only supports ISDN data, but the following func-

tions also become possible:

1. Fax service—Allows you to send and receive

G3 standard fax messages via Microsoft

Exchange, Messaging System, and Outlook.

2. Answering machine—The ISDN TA PC card

works as a digital answering machine with

the CAPI-based application program.

3. EuroFile Transfer—Allows you to send and

receive files when the EuroFile Transfer

function is running.

4. ISDN modem—The virtual modem function

allows all modem-based applications to use

the ISDN TA PC Card to connect via ISDN

line. The ISDN modem is a software modem

that, like a FOSSIL driver, “understands” AT

commands and converts them into CAPI 2.0

function calls. The ISDN modem can be used

with some modem applications in Windows 95,

e.g., Dial-Up Networking and HyperTerminal

(Hypertrm). It was designed for Windows 95-

compliant modem applications (TAPI,

VCOMM, Unimodem).

Introduction

2 Update–ISDN CAPI

NOTE: The ISDN modem is not an emulation of an

analog modem (i.e., it does not transmit tones).

Consequently, you cannot use it to set up a con-

nection to non-ISDN mailboxes, nor can you test it

with tools designed for analog modems.

5. Telephony—Telephony function turns your

laptop into a complete ISDN telephone (full

duplex sound card is required in your laptop).

2. Preparation

To run RVS-COM on your computer, you must have

Windows 95 or OSR2 installed with Microsoft Ex-

change and CAPI driver.

Microsoft Exchange

Refer to the Windows 95 user’s manual for addi-

tional details about MS Exchange installation and

configuration.

1. Select Control Panel è Add/Remove

Program è Windows Setup.

2. Click Microsoft Exchange (or Windows

Messaging in OSR2) check box. Click OK.

3. Select Manual method to set the service.

4. Add the service Personal Notes (Address

Book in OSR2) and Personal Directory

(Folders in OSR2).

5. When adding the Personal Directory,

provide a path for a pst file. For example, if

temp subdirectory exists, name the path

c:\temp\new.pst.

CAPI Driver

To install the CAPI driver for the ISDN TA PC Card:

1. Plug the ISDN TA PC Card into a free

PCMCIA slot. Windows 95 automatically

detects the PC Card.

2. Choose Driver from disk provided by

hardware manufacturer, then insert the

Preparation

Update–ISDN CAPI 3

ISDN TA CAPI driver disk. Enter the correct

driver path, e.g., A:\. Click OK.

3. Follow the instructions that appear on the

Windows 95 screen to install all VCOMM and

NDIS drivers. The default current active API

will be set to CAPI.

To change the setting to CAPI Mode:

1. Select Start è Programs è ISDN TA

Configuration utility è Configuration Utility.

2. From the Menu bar, click Mode è Mode

Change and select CAPI from the Mode

Choice list. Click OK.

3. RVS-COM Lite Installation

To install RVS-COM Lite on your PC:

1. Click Start è Settings è Control Panel.

Double-click Add/Remove Programs.

Click Install.

2. Insert the RVS-COM CD-ROM into your CD

drive. Then click Next.

3. D:\SETUP.EXE appears in the command line.

Click Finish.

4. Enter the serial number (KEY), which is

located on a sticker on the back of the CD-

ROM. Click SETUP and follow on-screen

instructions until setup is completed; then

clickFinish.

5. The RVS-COM installation Wizard appears

automatically. Click Next.

6. From the list, choose the appropriate

installation components for your applications.

For example: ISDN CAPI Adapter

ISDN Line/Phone Numbers

RVS ISDN Modems

RVS E-Mail Services

File Transfer Host

7. Click Next twice.

RVS-COM Lite Installation

4 Update–ISDN CAPI

ISDN CAPI Adapter Configuration

1. The RVS-COM Installation: ISDN Adapter

window appears. Click Next.

The ISDN Protocols and Services window

appears. Click Next.

2. The ISDN Softfax window appears. Select

the following:

Use Softfax to send fax

Use Softfax to receive fax

Softfax should also receive at 14400 bps

Click Next.

3. The ISDN Softmodem window appears.

Select Use Softmodem, then click Next. Then

clickFinish.

ISDN Line/Phone Numbers Configuration

1. The ISDN Line/Phone Numbers window

appears. Click Next.

2. The ISDN Line and Location window

appears. Enter the correct ISDN line type. For

example, Europe, Euro-ISDN (DSS1).

3. Click Dialing Properties to change Location,

Country Code, Area Code, or Access Code.

Click OK when finished to return to ISDN Line

and Location window. Then click Next.

4. The Charges window appears. Enter the unit

charge information for your ISDN calls. Then

click Next.

5. The ISDN Phone Numbers window appears.

Enter your MSN number for each service.

Then click Next.

NOTE: In Europe, if you subscribe to MSN service,

specify a unique MSN number for each application

such as Eurofile Transfer, Voice Mail, and G3 Fax.

If not, you must enter the MSN number 0for your

application. You can enable one service ONLY with

the MSN number 0 (for example, either G3 Fax, or

Voice Mail, or Eurofile Transfer).

RVS-COM Lite Installation

Update–ISDN CAPI 5

RVS-COM Lite Installation

6. The Phone Number for External Calls

window appears. Enter your ISDN phone

number. Then click Next.

NOTE: Some switches need this phone number as

the calling party number during ISDN connection

setup

7. The File Transfer Host window appears.

Enter phone numbers for your applications.

Or, enter the numbers later. Click Finish.

8. The RVS CAPI Modems windows appears.

Click Next. In the next window, specify the

COM port for your CAPI modem. For example,

COM6. Thenclick Finish.

E-Mail Transport Services Configuration

1. The E-Mail Transport Services window

appears. Click Next. In the next screen, select

RVS Fax and RVS Voice Mail to enable voice

and fax functions. Then click Next.

If you do not activate fax and voice functions, skip

steps 3 through 7 below.

2. The Fax window appears. Enter your sender

identification information. Click Next.

3. Select ISDN Fax G3 as your fax device. Click

Next.

4. Enter the phone number information for the

fax service. Click Next.

5. Enter the phone number for fax reception.

Click Next.

6. The Voice Mail window appears. Enter the

answerphone number. Click Answerphone to

edit your messages. Click Finish.

File Transfer Host Configuration (Host Mode in

RVS CommCenter)

1. The File Transfer Host window appears.

Click Next.

2. In the next window, enter the ID and

password for your file transfer host, which

6 Update–ISDN CAPI

allow remote callers to log into specified

folders and access data.

3. Specify the file folder path that requires ID

and password for caller access.

4. Specify the file folder path that allows caller

access without ID and password

5. ClickFinish.

The Installation Wizard is finished now. Click OK to

start the CommCenter and activate the installed

services. Reboot your laptop. RVS-COM is com-

pletely installed now. To change RVS-COM settings,

open RVS CommCenter.

4. Applications

4.1 Using PPP Protocol to Connect to ISPs

Select My computer è Control Panel è Modems.

If RVS ISDN Internet PPP appears in the list under

the General tab, RVS-COM was installed success-

fully. Otherwise, check the RVS-COM installation.

Or, call the RVS-COM support center for help.

Select Control Panel è Add/Remove Programs

è Windows Setup tab è Communications è

Details to ensure Dial-Up Networking appears in

the Components list. If it is not installed (the box

next to the folder is not checked), follow these

instructions:

1. In the Dial-Up Networking folder, click Make

New Connection. Enter a name for the new

connection icon. For example: RVS_1. Select

RVS ISDN Internet PPP.

2. With the right mouse button, click the new

connection icon.

3. In the General menu, enter the phone

number you want to dial. Select RVS ISDN

Internet PPP from the Connect Using box.

4. In the Server Type menu, select PPP: Win95,

Windows NT 3.5, Internet from the Type of

Applications

Update–ISDN CAPI 7

Dial-Up Server box.

5. Click the appropriate Advanced Options and

select, at least, TCP/IP in Network Protocols

for your Internet application

6. Click the TCP/IP Settings button and specify

the other TCP/IP parameters, such as IP

address and DNS address, if necessary.

Now you are ready to connect to your ISP via PPP

protocol.

4.2 Using Multi-Link PPP to Connect to ISPs

1. Select Start è Programs è RVS-COM Lite

è CommCenter. If only one COM port, (for

example, ISDN) is listed in CommCenter

controls the following ports: text box, add

another ISDN port.

2. To add another ISDN port, click Add. The Add

New Port window appears. Select An ISDN

channel on your local PC. Click Next.

3. Enter a new port name (for example, ISDN2).

Click Next.

Select Let other programs use this as a

COM port. Click Next. Select a name for this

port where it can be accessed in Windows.

Click Next. Click Finish.

4. Select My computer è Control Panel è

Modem. ClickAdd. Select Other.ClickNext.

5. Select Don’t check my modem; I will select

it from a list. Click Next.

6 Select RVS Datentechnik from the

Manufacturers list and RVS ISDN Internet

PPP from the Models list. Click Next.

7. Select the RVS COM port just added.

RVS ISDN Internet PPP #2 should appear in

the modem list.

8. In My Computer window, select the Dial-Up

Networking folder. Click Make new

Connection and enter a new connection

name. For example, RVS_2.

Applications

8 Update–ISDN CAPI

Select the modem RVS ISDN Internet PPP.

Click Next.

9. Enter the phone number for the computer you

want to dial. Click Next. Click Finish to return

to the Dial-Up Networking window.

10. With the right mouse button, click the icon

RVS_2. Click Properties.

11. To make connections with Multi-Link PPP,

click Settings. Select Use additional devices.

Then click Add. Use the arrow to scroll down

the Device name list and select RVS ISDN

Internet PPP #2. Click OK twice.

12. Select the Server Types tab. Use the arrow to

scroll down the Type of Dial-Up Server list

and select PPP: Win95, Windows NT 3.5,

Internet.

13. Click the appropriate Advanced options.

14. Under Allowed network protocols, select at

least TCP/IP protocol for your Internet

application.

15. Click TCP/IP Settings and specify other TCP/

IP parameters such as IP address and DNS

address, if necessary. Click OK when

finished.

Now you are ready to communicate with your ISP

via Multi-Link PPP protocol.

4.3 Making X.75 Connections

Act as a Called Party (for incoming calls)

1. Select Start è Programs è RVS-COM Lite

è CommCenter. Make sure the following

settings are correct:

Your ISDN phone number

COM port assignment

MSN/EAZ numbers

If you change any settings, remember to

reboot your system.

2. Select My Computer è Control Panel è

Modem. Select RVS ISDN X.75 transparent.

Applications

Tabla de contenidos

Otros manuales de Módem de Multitech

Multitech

Multitech MT1932ZDX Manual de usuario

Multitech

Multitech MultiModem iCell Manual de usuario

Multitech

Multitech MultiModem II MT5600BA-V.92 Manual de usuario

Multitech

Multitech RJModem MT5656RJ Manual de instrucciones

Multitech

Multitech MultiModem MTCBA-C-N1 Manual de usuario

Multitech

Multitech MultiModemUSB MT5634ZBA-USB Manual de usuario

Multitech

Multitech MTCBA-C-EN-N1 Manual de usuario

Multitech

Multitech MultiConnect microCell MTCM2-L4G1 Manual de usuario

Multitech

Multitech MultMobile MT9234MU Manual de usuario

Multitech

Multitech MultiModemISDN MTA128ST-USB Manual de usuario

Multitech

Multitech MultiModem ZBA USB MT5634ZBA-USB Manual de usuario

Multitech

Multitech MultiModem Cell MTCBA-E1 Manual de usuario

Multitech

Multitech Dragonfly MTQ-LNA7 Manual de usuario

Multitech

Multitech MultiModem MT5600DSDV2 Manual de usuario

Multitech

Multitech IWAY MT128ISA-UV Manual de usuario

Multitech

Multitech MultiModem ISI ISI3334/4 Manual de usuario

Multitech

Multitech CommPlete MT3334HD8 Manual de usuario

Multitech

Multitech MultiConnect MTC-LAT1-B02 Manual de usuario

Multitech

Multitech MultiModem ZBA Series Manual de instalación

Multitech

Multitech MTMC8-USB Manual de usuario

Multitech

Multitech MultiModem MT5656ZDX-V Manual de usuario

Multitech

Multitech MultiModem MTCBA-E-GP Manual de usuario

Multitech

Multitech MultiMobile MT56128ZLX-NT Manual de usuario

Multitech

Multitech MultiConnect microCell MTCM2 Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario