Moxa Technologies ToughNet TN-5524-8PoE Manual

P/N: 1802055240010

Moxa ToughNet Switch

TN-5524-8PoE

Hardware Installation Guide

Layer 2 M12 Managed PoE Ethernet Switches

First Edition, October 2012

- 2 -

Overview

The ToughNet TN-5524-8PoE series M12 managed Ethernet switches are

designed for industrial applications in harsh environments. The TN series

switches use M12 and other circular connectors to ensure tight, robust

connections, and guarantee reliable operation against environmental

disturbances, such as vibration and shock. The TN-5524-8PoE series

switches provide 24 Fast Ethernet M12 ports, 8 of which are

10/100BaseT(X) PoE compliant.

TN-5524-8PoE switches provide up to 15.4 watts of power per PoE port,

and allow power to be supplied to connected devices (such as surveillance

cameras, wireless access points, and IP phones) when AC power is not

readily available or is cost-prohibitive to provide locally. Models with an

extended operating temperature range of -40 to 75°C are also available.

The TN-5524-8PoE series Ethernet switches are compliant with

EN50155/50121-3-2/50121-4 (railway applications), making the

switches suitable for onboard train applications.

Package Checklist

Your ToughNet TN-5524-8PoE switch is shipped with the following items.

If any of these items is missing or damaged, contact your customer

service representative for assistance.

•1 Moxa ToughNet switch

•Hardware installation guide

•CD-ROM with user’s manual, Windows utility, and SNMP MIB file

•Moxa product warranty statement

•M12 to DB9 console port cable

•2 protective caps for console and relay output ports

•Panel mounting kit

Features

Anti-Vibration Circular Connectors for Robust Links

•M12 D-coding 4-pin female connectors for Fast Ethernet

10/100BaseT(X) ports

•M12 A-coding 5-pin male connectors for console and relay output

•M23 6-pin male connector for power input

Isolated Power Input

•Supports 24 VDC (16.8 to 30 VDC), isolated

High Performance Network Switching Technology

•IPv6 ready, certified by the IPv6 Logo Committee

•IEEE 1588 PTP (Precision Time Protocol) for the precise time

synchronization of networks

•DHCP Option 82 for IP address assignment with different policies

•Modbus/TCP industrial Ethernet protocol

•Turbo Ring, Turbo Chain,and RSTP/STP (IEEE802.1w/D)

•IGMP Snooping and GMRP for filtering multicast traffic from industrial

Ethernet protocols

•Port-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease

network planning

•QoS (IEEE802.1p/1Q and TOS/DiffServ) to increase determinism

•802.3ad, LACP for optimum bandwidth utilization

- 3 -

•IEEE802.1X and https/SSL to enhance network security

•SNMP v1/v2c/v3 for different levels of network management

•RMON for efficient network monitoring and proactive capability

•Bandwidth management prevents unpredictable network status

•Lock port restricts access to authorized MAC addresses only

•Port mirroring for online debugging

•Automatic warning by exception through email, relay output

•Automatic recovery of connected devices’ IP addresses

•Line-swap fast recovery

•LLDP for automatic topology discovery through network management

software

•Configurable through Web browser, Telnet/Serial console, and

Windows utility

Designed for Industry-specific Applications

•Power failure, port break alarm by relay output

•EN50155/EN50121-3-2/EN50121-4

•-40 to 75°C operating temperature range (for “-T” models)

•IP40, rugged high-strength housing

•Panel mounting mounting installation capability

Recommended Optional Accessories

•CBL-M23(FF6P)/OPEN-BK-100 IP67:

1-meter M23 to 6-pin power cable with IP67-rated female 6-pin M23

connector

•PLG-WPM23-01-IP67:

M23 cable connector, female 6-pin, crimp type

•CBL-M12D(MM4P)/RJ45-100 IP67:

1-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with IP67-rated

male 4-pin M12 D-coded connector

•CBL-M12(FF5P)/OPEN-100 IP67:

1-meter M12-to-5-pin power cable with IP67-rated female 5-pin M12

A-coded connector

•M12D-4P-IP68:

Field-installable M12 D-coded screw-in connector, male 4-pin,

IP68-rated

•M12A-5P-IP68:

Field-installable M12 A-coded screw-in connector, female 5-pin,

IP68-rated

•CAP-M12F-MIP67-PAK04:

Caps for M12 D-coded 4-pin male connectors, metal and IP67-rated;

4 pieces in one pack

- 4 -

TN-5524-8PoE Panel Layouts

1. Screw holes for panel mounting kit

2. Console port

3. Grounding screw

4. Relay output port

5. Power input voltage range indication

6. Power input port (male 6-pin shielded M23 connector)

7. PWR1 LED: for power input 1

8. PWR2 LED: for power input 2

9. FAULT LED

10.

MSTR/HEAD LED: for ring master or chain head

11.

CPLR/TAIL LED: for ring coupler or chain tail

12.

TP port’s 10/100 Mbps LED

13.

10/100BaseT(X) port (female 4-

pin shielded M12 connector with D

coding)

14.

10/100BaseT(X) PoE port (female 4-pin shielded M12 connector

with D coding)

15. LED for PoE port

- 5 -

ATTENTION

DO NOT open or remove the vent

(#15

). Once the seal has been

removed, the warranty becomes invalid.

Exposed connectors (including

3, 5, 14 and 18

) when not in use

must be tightly covered with protective caps (an optional

accessory) to ensure IP54/IP67

-rated protection.

Mounting Dimensions (unit = mm)

Panel/Wall Mounting

STEP 1:

Mounting the TN-5524-8PoE switches to a wall requires 4 screws. Use the

ToughNet switch as a guide to mark the correct positions of the 4 screws.

STEP 2:

Use the 4 screws in the panel mounting kit. If yo

would like to use your own screws, make sure the

screw head is

between 6.0 mm and 7.0 mm in

diameter and the shaft is less than

4.0 mm in

diameter, as shown at the right.

Do not screw the screws in all the way—leave a space of about 2 mm to

allow room for sliding the ToughNet switch between the wall and the

screws.

NOTE

Before tightening the screws into the wall, make sure the screw

head and shaft size are suitable by inser

ting the screw through

one of the keyhole-shaped apertures of the ToughNet switch.

STEP 3:

Once the screws are fixed in the wall, hang the ToughNet switch on the 4

screws through the large opening of the keyhole-shaped apertures, and

then slide the switch downwards. Tighten the four screws for added

stability.

- 6 -

NOTE

To provide greater protection from vibrations and shocks, use

screws with shaft diameter between 6.0 mm and 7.0 mm, and fix

the ToughNet switch onto the wall directly through the large

opening of the keyhole-shaped apertures.

Wiring Requirements

WARNING

Turn the power off before disconnecting modules or

wires. The

correct power supply voltage is listed on the product label. Check

the voltage of your power source to make sure you are using the

correct voltage. Do NOT use a voltage greater than what is

specified on the product label.

These devices must be s

upplied by a SELV source as defined in

the Low Voltage Directive 2006/95/EC and 2004/108/EC.

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa switch.

This device has

UL508 approval. Use copper conductors only,

60/75°C, and tighten to 4.5 pound

-inches. For use in pollution

degree 2 environments.

ATTENTION

Safety First!

Observe all electrical codes dictating the maximum current

allowable for each wire size. If the current goes above the

maximum ratings, the wiring could overheat, causing serious

damage to your equipment.

Be sure to read the following guidelines:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE

Do not run signal or communications wiring and power wiring

through the same wire conduit. To avoid interference, wires with

different signal characteristics should be routed separately.

- 7 -

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

•Keep input wiring and output wiring separated.

•We strongly advise that you label wiring for all devices in the system.

Grounding the ToughNet Switch

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

grounding screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface such as a metal panel.

Connecting the Power Supplies

The ToughNet TN-5524-8PoE series switches support one power supply.

The M23 6-pin male connector on the TN-5524-8PoEfront panel is used

for the power input.

Pinouts for the power input port on the TN-5524-8PoE

Description

Usage

1 PWR1 Live / DC +

Connect “PWR1 Live / DC +” to the Live

terminal when using an

AC power source or

to the positive (+) terminal when using a

power source.

2 PWR1 Neutral / DC -

Connect “PWR1 Neutral / DC –” to the

Neutral terminal when using an AC power

source or to the negative (-) terminal when

using a DC power source.

3 Chassis Ground

Connect the “Chassis Ground” to the safety

ground terminal for AC inputs or to the

equipment ground bus for DC inputs.

- 8 -

STEP 1:

Plug your power cord connector to the power input port of the

TN-5524-8PoE switch.

STEP 2:

Screw the nut on your power cord connector to the power input connector

on the switch to ensure a tight connection.

ATTENTION

Before connecting the TN

-5524-8PoEto the power input, make

sure the power source voltage is stable.

Connecting the Relay Outputs

Each TN-5524-8PoE switch has two sets of relay outputs—relay output 1

and relay output 2.The M12 A-coded 5-pin male connector on the

TN-5524-8PoE’s front panel is used for the two relay outputs. Use a power

cord with an M12 A-coded 5-pin female connector to connect the relay

contacts. You can purchase an M12 power cable from Moxa; the model

number is CBL-M12 (FF5P)/OPEN-100 IP67.

Pinouts for the relay output port on TN-5524-8PoE

FAULT:

The two sets of relay contacts of the M12 A-coded 5-pin male connector

are used to detect user-configured events. The two wires attached to the

fault contacts form an open circuit when a user-configured event is

triggered. If a user-configured event does not occur, the fault circuit

remains closed.

Connecting the Data Lines

10/100BaseT(X) Ethernet Port Connection

All TN-5524-8PoE models have 24 10/100BaseT(X) Ethernet ports (4-pin

shielded M12 connector with D coding). The 10/100TX ports located on

the TN-5524-8PoEfront panel are used to connect to Ethernet-enabled

devices. Most users configure these ports for Auto MDI/MDI-X mode, in

which case the port’s pinouts are adjusted automatically depending on

the type of Ethernet cable used (straight-through or cross-over), and the

type of device (NIC-type or HUB/Switch-type) connected to the port.

In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports. We also give cable wiring diagrams for

straight-through and cross-over Ethernet cables.

- 9 -

Pinouts for the 10/100BaseT(X) Ports on the TN-5524-8PoE

Pinouts for the RJ45 (8-pin) Port

8-pin RJ45

MDI Port Pinouts

MDI-X Port Pinouts

Signal

Tx+

Tx-

Rx+

Rx-

Signal

Rx+

Rx-

Tx+

Tx-

M12 (4-pin, M) to M12 (4-pin, M) Cross-Over Cable Wiring

M12 (4-pin, M) to M12 (4-pin, M) Straight-Trough Cable Wiring

M12 (4-pin, M) to RJ45 (8-pin) Cross-Over Cable Wiring

- 10 -

M12 (4-pin, M) to RJ45 (8-pin) Straight-Trough Cable Wiring

LED Indicators

Several LED indicators are located on the ToughNet switch’s front panel.

The function of each LED is described in the table below.

LED

Color

State

Description

System LEDs

PWR1 AMBER

Power is being supplied to power input

PWR1.

OFF Power is not being supplied to power

input PWR1

PWR2 AMBER

Power is being supplied to power input

PWR2.

OFF

Power is not being supplied to power

input PWR2.

FAULT RED

When the corresponding PORT alarm is

enabled, and a user-

configured event is

triggered.

OFF

When the corresponding PORT alarm is

enabled and a user-configured event is

not triggered, or when the

corresponding PORT alarm is disabled.

MSTR/

HEAD GREEN

When the TN switch is either the Master

of this Turbo Ring, or the Head of this

Turbo Chain.

Blinking

When the TN switch is Ring Master of

this Turbo Ring and the Turbo Ring is

broken, or it is Chain Head of this Turbo

Chain and the Turbo Chain is broken.

OFF

When the TN switch is neither the

Master of this Turbo Ring, nor the Head

of this Turbo Chain.

CPLR/

TAIL GREEN

When the TN switch enables the

coupling function to form a back-

up path

in this Turbo Ring, or it is the Tail of

this

Turbo Chain.

Blinking

When the Turbo Chain is down.

OFF

When the TN switch disables the

coupling function of Turbo Ring, or it is

not the Tail of the Turbo Chain.

Tabla de contenidos

Otros manuales de Cambiar de Moxa Technologies

Moxa Technologies

Moxa Technologies EDS-405A Manual

Moxa Technologies

Moxa Technologies SDS-3016 Series Manual de usuario

Moxa Technologies

Moxa Technologies EDS-208 series Manual de usuario

Moxa Technologies

Moxa Technologies PowerTrans PT-7828 Manual

Moxa Technologies

Moxa Technologies PT-508 Series Manual

Moxa Technologies

Moxa Technologies PT-7528 Manual

Moxa Technologies

Moxa Technologies EDS-G512E-8PoE Manual

Moxa Technologies

Moxa Technologies EDS-505A Series Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-G205A-4POE-1GSFP-T Manual de usuario

Moxa Technologies

Moxa Technologies EDS-316 Series Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-728 Series Manual

Moxa Technologies

Moxa Technologies IEX-408E-2VDSL2-HV Manual de usuario

Moxa Technologies

Moxa Technologies SPL-24 Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-30 Manual

Moxa Technologies

Moxa Technologies PT-7528-24TX-HV Manual de usuario

Moxa Technologies

Moxa Technologies IKS-6728-8PoE Manual

Moxa Technologies

Moxa Technologies ToughNet TN-5516 Series Manual

Moxa Technologies

Moxa Technologies NE-4100 Series Manual de usuario

Moxa Technologies

Moxa Technologies TN-5308-LV-T Manual de usuario

Moxa Technologies

Moxa Technologies EDS-G308 Series Manual de usuario

Moxa Technologies

Moxa Technologies IKS-6726-8PoE Series Manual

Moxa Technologies

Moxa Technologies EDS-G308 Manual

Moxa Technologies

Moxa Technologies IKS-6726-8PoE Series Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-405A/408A Series Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario