Moxa Technologies ICS-G7748A Series Manual de usuario

P/N: 1802077001011

*1802077001011*

ICS-G7748A/G7750A/

G7752A/G7848A/G7850A/

G7852A Series

Quick Installation Guide

Edition 3.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia

-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045

- 2 -

Package Checklist

The Moxa ICS-G7748A/G7750A/G7752A/G7848A/G7850A/G7852A

industrial rackmount switches (abbreviated ICS) are shipped with the

following items. If any of these items are missing or damaged, please

contact your customer service representative for assistance.

•ICS-G7748A or ICS-G7750A or ICS-G7752A or ICS-G7848A or

ICS-G7850A or ICS-G7852A switch

•USB cable (Type A male to Type B male)

•2 power cords

•2 PWR-G7000A-AC power modules

•Protective caps for unused ports

•2 rackmount ears

•2 metal handles

•12 cover plates

•Documentation and software CD

•Quick installation guide (printed)

•Warranty card

Panel Layouts

Front View

ICS-G7748A/G7848A with IM-G7000A modules

ICS-G7750A/G7850A with IM-G7000A modules

- 3 -

ICS-G7752A/G7852A with IM-G7000A modules

Rear View

Front View of IM-G7000A Modules

1. Terminal block for Relay Output and Digital Input

2. System status LEDs

3. Copper module slot for 10/100/1000BaseT(X) port or SFP module slot

for 100/1000BaseSFP

4. Hot-swap status LED

5. 10/100/1000BaseT(X) port status LEDs or 100/1000BaseSFP port

status LEDs

6. Metal handle

7. 19” rack-mount ear

8. Model name

9. USB storage port (ABC-02-USB)

10. Reset button

11. USB serial console port

12. Hot-swap button

- 4 -

13. Metal cover plate

14. 10 Gigabit Ethernet SFP+ slot

15. 10 Gigabit Ethernet SFP+ port status LEDs

16. First PWR-G7000A-AC power module (PWR1)

17. Grounding screw

18. Second PWR-G7000A-AC power module (PWR2)

19. External power supply for the PoE status LED

20. External power supply for the PoE module

21. IM-G7000A-8PoE port LEDs

Dimensions (unit = mm)

Grounding the Industrial Rackmount Switch

Grounding and wire routing help limit the effects of noise from

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

Connecting the Power Inputs

The ICS supports dual redundant power supplies: Power Supply 1 (PWR1)

and Power Supply 2 (PWR2). The connections for PWR1 and PWR2 are

located on the rear of the product. Be sure to use a standard power cord

with an IEC C13 connector, which is compatible with the AC power inlet.

- 5 -

Installing/Removing ICS Switch Modules

IM-G7000A Series modules are designed for installation in ICS switches.

Before inserting the module into the slot, first remove the metal cover

plate. Push the module along the track and firmly connect the module

with the connector. Finally, secure the module by firmly tightening the

screws.

IM-G7000A Series modules are hot-swappable. Take the following steps

to remove modules from the switch:

1. Push the HOT SWAP button on the module.

2. Wait for the HOT SWAP STATE LED to turn off.

3. Loosen the screw(s) and remove the module.

Wiring the Relay Contact

Each ICS switch has one relay output.

FAULT: The relay contact of the 4-pin terminal block connector is used to

detect user-configured events. The two wires attached to the fault

contacts form an open circuit when a user-configured event is triggered.

If a user-configured event does not occur, the fault circuit remains closed.

USB Console Connection

The ICS has one USB console port (type B connector) located on the top

panel. Use the USB cable (provided in the product package) to connect

the ICS’s console port to your PC’s USB port, and install the USB driver

(available on the software CD) on the PC. You may then use a console

terminal program, such as Moxa PComm Terminal Emulator, to access the

ICS’s console configuration utility.

USB Console Port (Type B Connector) Pinouts

Description

D– (Data -)

VCC (+5V)

D+ (Data+)

GND (Ground)

USB Storage Connection

The ICS has one USB storage port (type A connector) on the front panel.

Use Moxa’s ABC-02-USB automatic backup configurator to connect the

ICS’s USB storage port for configuration backup, firmware upgrade, or

system log file backup.

USB Storage Port (Type A Connector) Pinouts

Description

VCC (+5V)

D– (Data -)

D+ (Data+)

GND (Ground)

NOTE

DO NOT remove the ABC-02-USB USB Automatic Backup

Configurator while writing or reading data.

- 6 -

Reset Button

Depress the Reset button continuously for five seconds to load the factory

default settings. Use a pointed object, such as a straightened paper clip or

toothpick, to depress the Reset button. When you do so, the STATE LED

will start to blink about once per second. Continue to depress the STATE

LED until it begins blinking more rapidly, which indicates that the button

has been depressed for five seconds and you can release the Reset button

to load factory default settings.

NOTE

DO NOT power off the switch when loading default settings.

LEDs

LED

Color

State

Description

System LEDs

STATE GREEN

System has passed the self-diagnosis test

on boot-up and is ready to run.

Blinking

1. System is undergoing the self-diagnosis

test

2. Blink continuously when pressing the

reset button 5 seconds to reset to factory

default

3. Blink slowly when an ABC-

02 automatic

backup device is detected

RED

System failed self-diagnosis on boot-up.

PWR1 AMBER On

Power is being supplied to the main

module’s power input PWR1.

Off

Power is not being supplied to the main

module’s power input PWR1.

PWR2 AMBER On Power is being supplied to the main

module’s power input PWR2.

Off

Power is not being supplied to the main

module’s power input PWR2.

FAULT RED On

System is in the event of failure, or is

under quick inspection.

Off

System is in normal operation.

MSTR/

HEAD GREEN

The switch is set as the Master of the Turbo

Ring, or as the Head of the Turbo Chain.

Blinking

Switch

has become the Ring Master of the

Turbo Ring, or the Head of the Turbo

Chain, after the Turbo Ring or the Turbo

Chain is down.

Off

The switch is not the Master of this Turbo

Ring or is set as a Member of the Turbo

Chain

CPLR/

TAIL GREEN On

Switch’s coupling function is enabled to

form a back-up path, or when it’s set as

the Tail of the Turbo Chain.

Blinking

Turbo Chain is down

Off

Switch has disabled the coupling function.

When the system is importing/exporting data from or to an ABC-02

automatic backup device, the FAULT, MSTR/HEAD, and CPLR/TAIL LEDs

will blink in sequence.

- 7 -

LED

Color

State

Description

Main Module LED Status

10 GbE (Fiber

Optic Port) GREEN

The corresponding port’s link is

active.

Blinking

Data is being transmitted.

Off

The corresponding port’s link is

inactive.

IM-G7000A-

4GTX 10/

100/1000

Mbps (TP

Ports)

GREEN

The corresponding port’s link is

active at 1000 Mbps.

Blinking Data is being transmitted at 1000

Mbps.

Off

The corresponding port’s link is

inactive.

AMBER

The corresponding port’s link is

active at 10/100 Mbps

Blinking

Data is being transmitted.

Off

The corresponding port’s link is

inactive.

IM-G7000A-

4GSFP 100/

1000 Mbps

(Fiber Optic

Ports)

GREEN

The corresponding port’s link is

active at 1000 Mbps

Blinking

Data is being transmitted.

Off

The corresponding port’s link is

inactive.

AMBER

The corresponding port's link is

active at 100 Mbps

Blinking

Data is being transmitted.

Off

The corresponding port’s link is

inactive.

IM-G7000A-

4PoE (PoE+

Ports)

GREEN On

The PoE device is connected by the

IEEE 802.3at standard.

Off

No PoE power is being output or no

PoE devices are connected.

AMBER On

The PoE device is connected by the

IEEE 802.3af standard

Off No PoE power is being

output or no

PoE devices are connected.

RED Blinking

PoE failure:

• 1 time/s: PoE standard detection

failure

• 2 times/s: PoE current overload

Off

No PoE failure

EPS

(IM-G7000A-

4PoE module

only)

Amber On

External power supply is working

for PoE+ power output

Off

External power supply is not

working for PoE+ power output

HOT SWAP

STATE GREEN

The module is working

Blinking

The module is uninstalling

Off

The module is not working or can

be safely removed.

- 8 -

Specifications

Technology

Standards

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X) and 100BaseFX

IEEE 802.3ab for 1000BaseT(X)

IEEE 802.3z for 1000BaseSX/LX/LHX/ZX

IEEE 802.3ae for 10 Gigabit Ethernet

IEEE 802.3x for Flow Control

IEEE 802.1D-2004 for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN Tagging

IEEE 802.1p for Class of Service

IEEE 802.1X for Authentication

IEEE 802.3ad for Port Trunk with LACP

Protocols

IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP

Server/Client, BootP, TFTP, SNTP, SMTP, RARP,

RMON, HTTP, HTTPS,Telnet, Syslog, DHCP Option

66/67/82, SSH, LLDP, IEEE 1588 PTP V2,

EtherNet/IP, Modbus/TCP, SNMP Inform, NTP

Server/Client, IPv6 (ICS-G7700A series)

Layer 3 Switching

(ICS-G7800A)

Static routing, RIP V1/V2, OSPF, DVMRP, PIM-DM,

PIM-SM, PIM-SSM

Layer 3 Switching

Redundancy

(ICS-G7800A)

VRRP

MIB

MIB-II, Ethernet-like MIB, P-BRIDGE MIB,

Q-

BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB

Groups 1, 2, 3, 9

Flow Control

IEEE 802.3x flow control, back pressure flow

control

Interface

Gigabit Ethernet

10/100/1000BaseT(X) or 100/1000BaseSFP slot

10 Gigabit Ethernet

10GbE SFP+ slot

Console Port

USB-serial console (Type B connector)

Storage Port

USB storage (Type A connector for ABC-02-USB)

LED Indicators

STATE, PWR1, PWR2, FAULT, MSTR/HEAD,

CPLR/TAIL

Alarm Contact

1 relay output with current carrying capacity of 2 A

@ 30 VDC

Digital Inputs

1 input with the same ground, but electrically

isolated from the electronics.

• +13 to +30 V for state “1”

• -30 to +1 V for state “0”

• Max. input current: 8 mA

- 9 -

Power Requirements

Input Voltage

ICS-G7000A Switch:

110/220 VAC (85 to 264 VAC)

IM-G7000A-4PoE Module:

48 VDC (46 to 57 VDC)

Input Current

ICS-G7748A/7848A Switch:

Max. 1.02/0.46 A @ 110/220 VAC

ICS-G7750A/7850A Switch:

Max. 1.10/0.49 A @ 110/220 VAC

ICS-G7752A/7852A Switch:

Max. 1.19/0.52 A @ 110/220 VAC

IM-G7000A-4PoE Module:

Max. 2.90 A @ 48 VDC

Overload Current

Protection

Present

Physical Characteristics

Housing

IP30 protection

Dimensions

440 x 176 x 482.8 mm (17.32 x 6.93 x 20.62 in)

Weight

12.9 kg

Installation

4U 19” rack mounting

Environmental Limits

Operating Temp.

-10 to 60°C (14 to 140°F)

Storage Temp.

-40 to 85°C (-40 to 185°F)

Ambient Relative

Humidity.

5 to 95% (non-condensing)

Standards and Certifications

Safety

UL 60950-1, EN 60950-1

EMI

FCC Part 15 Subpart B Class A, EN 55032 Class A

EMS

EN 61000-4-2 (ESD) Level 3,

EN 61000-4-3 (RS) Level 3,

EN 61000-4-4 (EFT) Level 3,

EN 61000-4-5 (Surge) Level 3,

EN 61000-4-6 (CS) Level 3,

EN 61000-4-8,

EN 61000-4-11

Rail Traffic

EN 50121-4

Shock

IEC 60068-2-27

Freefall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Warranty

Warranty Period

5 years

Details

See www.moxa.com/warranty

- 10 -

Rack Mounting Instructions

1. Elevated Operating Ambient: If installed in a closed or multi-unit

rack assembly, the operating ambient temperature of the rack

environment may be greater than room ambient. Therefore,

consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature

(Tma) specified by the manufacturer.

2. Reduced Air Flow:Installation of the equipment in a rack should be

such that the amount of air flow required for safe operation of the

equipment is not compromised.

3. Mechanical Loading:Mounting of the equipment in the rack should

be such that a hazardous condition is not achieved due to uneven

mechanical loading.

4. Circuit Overloading:Consideration should be given to the

connection of the equipment to the supply circuit and the effect that

overloading of the circuits might have on overcurrent protection and

supply wiring. Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

5. Reliable Earthing:Reliable earthing of rack-mounted equipment

should be maintained. Particular attention should be given to supply

connections other than direct connections to the branch circuit (e.g.,

use of power strips).

Restricted Access Locations

•This equipment is intended to be used in Restricted Access Locations,

such as a computer room, with access limited to SERVICE

PERSONNEL or USERS who have been instructed on how to handle

the metal chassis of equipment that is so hot that special protection

may be needed before touching it. The location should only be

accessible with a key or through a security identity system.

•External metal parts of this equipment are extremely hot!! Before

touching the equipment, you must take special precautions to protect

your hands and body from serious injury.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Moxa Technologies

Moxa Technologies

Moxa Technologies EDS-G205-1GTXSFP Manual

Moxa Technologies

Moxa Technologies ToughNet TN-5516 Series Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A-T Manual

Moxa Technologies

Moxa Technologies EDS-508 Series Manual de usuario

Moxa Technologies

Moxa Technologies EDS-P308 Series Manual

Moxa Technologies

Moxa Technologies PT-G7828 Manual de usuario

Moxa Technologies

Moxa Technologies PT-G503-PHR-PTP Series Manual de usuario

Moxa Technologies

Moxa Technologies PowerTrans PT-7828 Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Manual

Moxa Technologies

Moxa Technologies PT-7728 Series Manual de usuario

Moxa Technologies

Moxa Technologies RKS-G4028 Series Manual de usuario

Moxa Technologies

Moxa Technologies EDS-316 Series Manual de usuario

Moxa Technologies

Moxa Technologies EDS-2005-EL Series Manual de usuario

Moxa Technologies

Moxa Technologies MDS-G4000 Series Manual de usuario

Moxa Technologies

Moxa Technologies NE-4100 Series Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-205 Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-505A Manual

Moxa Technologies

Moxa Technologies EtherDevice Switch EDS-G205 Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-205 Manual de usuario

Moxa Technologies

Moxa Technologies EDS-600 Series Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-G205A-4PoE-1GSFP Manual

Moxa Technologies

Moxa Technologies SPL-24 Manual de usuario

Moxa Technologies

Moxa Technologies TN-5308-LV Manual de usuario

Moxa Technologies

Moxa Technologies EDS-2010-ML Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario