molex 63827-0470 Manual de usuario
Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals
Doc No: AT -6382704HM Release Date: 09-13-13 UNCONTROLLED COPY Page 1 of 6
Revision: A Revision Date: 09-13-13
INSULATION
CRIMP HEIGHT
▲SEE NOTE
BRUSH
STRIP LENGTH
BELL MOUTH
CUT
-
OFF
TAB
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP HEIGHT
TWISTING
SEAM
WIRE
Application Toolin
Specification Sheet
Modular Crimp Head
Order No. 63827-0470
Hand Crimp Tool
Order No. 63827-0400
FEATURES
% A full cycle ratcheting hand tool ensures complete crimps
% Ergonomically designed soft handles
% Precisely designed crimping profiles with simple contact positioning
% Easy handling due to outstanding force ratio
% Modular Crimp Head is removable and can be use in the Air Powered Tool Order No.63816-0100,
accompanied by Air Powered Crimp Adapter (Order No. 63816-0700).
% Can also be used in the Battery Powered Tool Order No. 63816-0200 (110 V) or 63816-0250 (220 V)
accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600).
SCOPE
Products: 1.78mm (.070") Tab Female Crimp Terminals, 16-20 AWG.
Terminal
Series No.
Terminal Order No. Wire Size and Type
(2)
Insulation Diameter
UL1007 or Equivalent Strip Len th
(1)
Reel Form Only
AWG
mm²
mm
In.
mm
In.
35028 35028-1111
20
0.52
1.75
.069
420-5.00 .165-.197
18
0.82
2.03
.080
16
1.31
2.41
.095
(1) Customer to cut off terminal from reel: 0.30mm (.012”) maximum Cut
-
off Tab.
(2) ee crimp specification for the individual Insulation Diameter.
DEFINITION OF TERMS
TYPE 4A
Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals
Doc No: AT -6382704HM Release Date: 09-13-13 UNCONTROLLED COPY Page 2 of 6
Revision: A Revision Date: 09-13-13
▲Insulation Crimp Note:
Due to the terminal’s insulation grip design and/or
insulation diameter range, this tool uses “overlap” form
geometry in the insulation punch. This produces an
overlap insulation crimp (A620 – compliant). While the
insulation punch profile may appear “lopsided”, this is
a normal condition for this tool. ee figure to the right.
( ome tools with multiple crimp pockets may not have
the “overlap” profile on all pockets).
CRIMP SPECIFICATIONS:
Terminal Series No.
Bell mouth
●
Conductor
Brush
Bend up Bend Down
Twist Roll
mm
In.
mm
In.
De ree
De ree
35028
0.20
-
0.50
.008
-
.020
0.00
-
1.00
0.00
-
.0
40
3
3
3
5
●
Not to exceed above the conductor crimp height.
After crimping, the conductor profiles should measure the following ♦.
Terminal Series No.
Wire Size
♦
Conductor
♦Profile
Crimp Hei ht
Crimp Width
AWG
mm
2
mm
In.
mm
In.
20
1
6
18
35028
20
0.52
1.25
-
1.32
.049
-
.051
2.5
-
2.4
.098
-
.095
X
18
0.82
1.33
-
1.40
.052
-
.055
2.5
-
2.4
.098
-
.095
X
16
1.31
1.40
-
1.48
.055
-
.058
2.5
-
2.4
.0
98
-
.095
X
Terminal
Series No.
Wire Size
Insulation Diameter
Insulation
Pull Force
Minimum
Crimp Hei ht
Crimp Width
mm
2
mm
In.
mm
In.
mm
In.
N
Lb.
35028
20
1.75
.069
2.75
-
2.95
.108
-
.116
3.10
-
3.35
.122
-
.132
58.6
13.2
18
2.03
.080
2.95
-
3.15
.11
6
-
.124
3.25
-
3.35
.128
-
.132
107.5
24.2
16
2.41
.095
3.00
-
3.30
.118
-
.130
3.25
-
3.35
.128
-
.132
127.1
28.6
♦ For 14 AWG and double wire applicators- ee hand tool 63827-0500.
Tool Qualification Notes:
1. Pull Force should be measured with no influence from the insulation crimp.
2. The above specifications are guidelines to an optimum crimp.
Notes:
1. This tool should only be used for the terminals and wire gauges specified on this sheet.
2. This tool is not adjustable for crimp height; however crimp force is adjustable ( ee instructions above).
Variations in tools, terminals, wire stranding and insulation types may affect crimp height.
3. This tool is intended for standard conductor sizes. It may not give a good insulation crimp support for all
insulation sizes.
4. Molex does not repair hand tools (see warranty above). The replacement parts listed are the only parts
available for repair. If the handles or crimp tooling is damaged or worn, a new tool must be purchased.
OVERLAP
INSULATION
CRIMP
OVERLAP FORM GEOMETRY
ANVIL
PUNCH
WIRE
Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals
Doc No: AT -6382704HM Release Date: 09-13-13 UNCONTROLLED COPY Page 3 of 6
Revision: A Revision Date: 09-13-13
WIRE
INSULATION
PUNCH
TERMINAL
WIRE STOP BLADE
Fi ure 1
Fi ure 2
WIRE
TERMINAL
LOCATOR
INSULATI
ON
PUNCH
IN
SULATION
ANVIL
WIRE STOP
BLADE
CONDUCTOR ANVIL
CONDUCTOR
PUNCH
5. Pull force should be used as the final criteria for an acceptable crimp. Pull force is measured with no
influence from the insulation crimp. The insulation should be stripped long (1/2 in.) so the insulation grips
on the terminal do not grip the wire insulation or the conductor. Refer to Molex Quality Crimping
Handbook 63800-0029 for additional information on crimping and crimp testing.
6. Molex does not certify crimp hand tools.
OPERATION
Open the tool by squeezing the handles together, at the end of the closing stroke, the ratchet mechanism will
release the handles, and the hand tool will spring open.
Crimpin Terminals
1. Place the terminal into the correct die profile until the terminal stopped by the locator.
2. Bring the wire stop blade down; make sure the wire stop located behind the conductor grip.
3. Place a pre-striped wire into the terminal until the end of wire touching the wire stop. ee Figure 2.
4. Close the tool until the ratchet releases, the tool handles will then spring open.
5. Carefully remove the crimped terminal.
Note: The tamper proof ratchet action will not release the tool until it has been fully closed.
Maintenance
It is recommended that each operator of the tool be made aware of, and responsible for, the following
maintenance steps:
1. Remove dust, moisture, and other contaminants with a clean brush, or soft, lint free cloth.
2. Do not use any abrasive materials that could damage the tool.
Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals
Doc No: AT -6382704HM Release Date: 09-13-13 UNCONTROLLED COPY Page 4 of 6
Revision: A Revision Date: 09-13-13
3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality machine
oil. Do not oil excessively. The tool was engineered for durability but like any other equipment it needs
cleaning and lubrication for a maximum service life of trouble free crimping. Light oil (such as 30 weight
automotive oil) used at the oil points, every 5,000 crimps or 3 months, will significantly enhance the tool life.
4. Wipe excess oil from hand tool, particularly from crimping area. Oil transferred from the crimping area onto
certain terminations may affect the electrical characteristics of an application.
5. When tool is not in use, keep the handles closed to prevent objects from becoming lodged in the crimping dies,
and store the tool in a clean, dry area.
Miscrimps or Jams
hould this tool ever become stuck or jammed in a partially closed position, Do Not force the handles open or
closed. The tool will open easily by lifting the ratchet release lever. ee Figure 6.
Warranty
This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital
components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30
days. hould such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will
not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only. Any clamping,
fixturing, or use of handle extensions voids this warranty.
CAUTION: Repetitive use of this tool should be avoided.
CAUTIONS:
1. Manually powered hand tools are intended for low volume or field repair. This tool is NOT intended for
production use. Repetitive use of this tool should be avoided.
2. Insulated rubber handles are not protection against electrical shock.
3. Wear eye protection at all times.
4. Use only the Molex terminals specified for crimping with this tool.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals
Doc No: AT -6382704HM Release Date: 09-13-13 UNCONTROLLED COPY Page 5 of 6
Revision: A Revision Date: 09-13-13
MODULAR
CRIMP
HEAD
BATTERY
POWER
CRIMP
ADAPTER
LOCKING
PINS
LOCKING PINS
BATTERY
POWERED
TOOL
AIR
POWER
TOOL
MODULAR
CRIMP HEAD
LOCKING
PINS
LOCKING
PINS
AIR
POWER
CRIMP
ADAPTER
Applications for the Modular Crimp Head
WARNING: NEVER operate, service, install, or adjust this Modular Crimp Head without proper instruction
and without first reading and understanding the instructions in the proper Manual or pecification heet.
ee Chart below for the correct Manual or pecification heet.
WARNING: NEVER install tooling or service this tool while it is into any power source. Disconnect the
power by unplugging or turn off the Actuator from its power source.
CAUTION: Keep fingers away from the crimping area when operating this tool. It may cause severe injury.
CAUTION: Wear safety glasses when operating or serving this tool.
The chart below shows all applications for this Modular Crimp Head.
Modular Crimp Head
Order No.
Tool
Order no.
Tool
Description
Adapter
Order No.
Adapter
Description
Fi ure
No.
63827-0470
63816
-
0000
Hand Crimp Frame ( hort)
N/A
N/A
3
63816
-
0050
Hand Crimp Frame (Long)
N/A
N/A
3
63816
-
0200
Battery Power
Tool (110 V)
63816
-
0600
Battery Power Cri
mp Adapter
4
63816
-
0250
Battery Power
Tool (220 V)
63816
-
0600
Battery Power Crimp Adapter
4
63816
-
0100
Air
Po
w
er
Tool
63816
-
0700
Air Power Crimp Adapter
5
Applications for the Modular Crimp Head
Hand Crimp Tool
Battery Powered Tool
Air Powered Tool
Fi ure 3
Fi ure 4
Fi ure 5
MODULAR
CRIMP
HEAD
LOCKING
PINS
HAND CRIMP
FRAME LONG
OR SHORT
Hand Crimp Tool for 1.78mm (.070") Tab Female Crimp Terminals
Doc No: AT -6382704HM Release Date: 09-13-13 UNCONTROLLED COPY Page 6 of 6
Revision: A Revision Date: 09-13-13
RATCHET
RELEASE LEVER
HANDLE
SPRING
CRIMPING
SPRING (2)
3
6
4
Fi ure 6
M4 X 14mm
LONG BHCS
2
5
1
PARTS LIST
Item
Order Number
Description
Quantity
1
63827
-
04
70
Modular
Crimp
Head
1 (
R
ef)
2
63816
-
00
5
0
Hand Crimp
Frame
(Long)
1
(
R
ef)
3
63827
-
04
75
Locator
1
4
63816
-
0001
Locking
Pin
2
5
63600
-
0525
Handle pring
1
6
63600
-
0520
Crimping pring
2
Visit our Web site at http://www.molex.com
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Herramientas de crimpado de molex
molex
molex 63801-8500 Manual de usuario
molex
molex 207129 Series Manual de usuario
molex
molex 63825-9700 Manual de usuario
molex
molex 44262-4306 Manual de usuario
molex
molex 63811-7100 Manual de usuario
molex
molex 63823-5100 Guía del usuario
molex
molex 63825-2800 Manual de usuario
molex
molex 59354 Manual de usuario
molex
molex 63825-5800 Guía del usuario
molex
molex AT 2080 Guía del usuario
molex
molex 63811-8200 Manual de usuario
molex
molex 63823-7970 Manual de usuario
molex
molex 207129 Series Manual de usuario
molex
molex 207129 Series Manual de usuario
molex
molex 50837 Manual de usuario
molex
molex 69008-1100 Manual de usuario
molex
molex 207129 Series Manual de usuario
molex
molex 63811-6400 Manual de usuario
molex
molex 207129 Series Manual de usuario
molex
molex 207129 Series Manual de usuario
Manuales populares de Herramientas de crimpado de otras marcas
Textron
Textron ESG105L Manual de usuario
Tyco Electronics
Tyco Electronics 90035-3 Manual de usuario
Emerson
Emerson Klauke ES 20RMCCFB Manual de usuario
Continental Refrigerator
Continental Refrigerator PC150HD Manual de usuario
TE Connectivity
TE Connectivity ERGOCRIMP 1-1579001-3 Manual de usuario
Tyco Electronics
Tyco Electronics CERTI-CRIMP 90418-1 Manual de usuario