Molex 19294-0008 Manual de usuario

Manual Crimping Tool

Doc No: ATS-192940008 Release Date: 09-22-09 UNCONTROLLED COPY age 1 of 2

Revision: A Revision Date: 09-22-09

HAMMER

Figure 3

WIRE

AWG

MARKINGS

Figure 2

STRIPPED

WIRE

CENTER BARREL

OVER NEST

Ma ual Crimpi g Tool

Specificatio Sheet

Order No. 19294-0008

E gi eeri g No. - SKT-840

FEATURES

 Compact and easy to use

 Inexpensive for lower volume production or field repairs

 Designed to crimp closed barrel terminals

DESCRIPTION:

This Manual Tool is used for crimping non-insulated 8AWG thru 4/0 closed barrel terminals. This tool can be used

with a hammer or vise. This tool is not UL listed with any Molex products.

OPERATION

WARNING: Make sure that the wire or cable is Disconnected from a y power source.

1. osition the Manual Crimping Tool on a solid surface with the base down.

2. lace a thumb on the tool body behind the ram.

3. Use an index finger under the lift lever and push up. See Figure 1.

4. Insert the desired terminal or splice in the nest making sure the crimp

barrel is centered.

5. For butt splices, center half of the barrel into the nest.

6. Release the lift lever, allowing the ram to contact the terminal or splice.

7. Insert the proper stripped wire into the barrel of the terminal. See Figure 2.

Figure 1

LIFT LEVER

RAM

Manual Crimping Tool

Doc No: ATS-192940008 Release Date: 09-22-09 UNCONTROLLED COPY age 2 of 2

Revision: A Revision Date: 09-22-09

Risk of flyi g debris.

Risk of eye i jury.

Wear safety glasses whe

usi g this tool.

8. Using a 2lb hammer strike the top of the ram until the lift lever is

lined up with the correct AWG marking located on the side of the

tool. See Figure 3.

9. Lift the ram by pulling up on the lift lever and removing the crimped

assembly. For butt splices repeat this procedure on the opposite

side of the barrel. See Figure 4.

Mai te a ce

It is recommended that each operator of the tool be made aware of,

and responsible for, the following maintenance steps:

1. Remove dust, moisture, and other debris with a clean brush, or

soft, lint free cloth.

2. Do not use any abrasive materials that could damage the tool.

3. Make certain all movable parts such as ram is oiled regularly. Light oil (such as SAE30W oil) should be used.

4. When the tool is not in use, store it in a clean, dry area.

Warra ty

All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect occur, the

tool will be exchanged free of charge. This exchange will not be applicable to altered, misused, or damaged tools.

This tool is designed for hand use only.

Americas Headquarters

Lisle, Illinois 60532 U.S.A.

1-800-78MOLEX

[email protected]

Far East North Headquarters

Yamato, Kanagawa, Japan

81-462-65-2324

[email protected]

Far East South Headquarters

Jurong, Singapore

65-6-268-6868

[email protected]

Europea Headquarters

Munich, Germany

49-89-413092-0

[email protected]

Corporate Headquarters

2222 Wellington Ct.

Lisle, IL 60532 U.S.A.

630-969-4550

Fax: 630-969-1352

Visit our Web site at http://www.molex.com

Figure

LIFT

LEVER

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Herramientas de crimpado de molex

molex

molex 63827-6070 Manual de usuario

molex

molex 63819-7670 Manual de usuario

molex

molex 63827-7900 Manual de usuario

molex

molex 63825-1670 Manual de usuario

molex

molex AT 1610 Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63823-6370 Manual de usuario

molex

molex 63819-2800 Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63816-0200 Manual de usuario

molex

molex MOLEX Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 35745 Series Manual de usuario

molex

molex CR5907 Manual de usuario

molex

molex 63825-9400 Guía del usuario

molex

molex 63811-6170 Manual de usuario

molex

molex AT FIFG Manual de usuario

molex

molex ServiceGrade Guía del usuario

molex

molex 63811-6670 Manual de usuario

molex

molex 207129 Series Manual de usuario

molex

molex 63828-1900 Manual de usuario

molex

molex 200218-2600 Guía del usuario

molex

molex 63811-9370 Manual de usuario

molex

molex 4D Manual de usuario

Manuales populares de Herramientas de crimpado de otras marcas

Panduit

Panduit CT-1000 Guía del administrador

JST

JST CS 10 Manual de usuario

Danfoss

Danfoss ET4200 Manual de usuario

Tyco Electronics

Tyco Electronics PRO-CRIMPER III Manual de usuario

TE Connectivity

TE Connectivity 2063528-1 Manual de usuario

Tyco Electronics

Tyco Electronics 69156-1 Manual de usuario

CRH

CRH CRL CBLHCT1 Manual de usuario

Emerson

Emerson Klauke ES 105CFM Manual de usuario

KIMBALL MIDWEST

KIMBALL MIDWEST 27-798 Manual de instrucciones

Danfoss

Danfoss ET4350 Manual de usuario

Milwaukee

Milwaukee M18 Manual de usuario

HOGERT

HOGERT HT1P169 Manual de usuario

Textron

Textron ESG105L Manual de usuario

Tyco Electronics

Tyco Electronics 90035-3 Manual de usuario

Emerson

Emerson Klauke ES 20RMCCFB Manual de usuario

Continental Refrigerator

Continental Refrigerator PC150HD Manual de usuario

TE Connectivity

TE Connectivity ERGOCRIMP 1-1579001-3 Manual de usuario

Tyco Electronics

Tyco Electronics CERTI-CRIMP 90418-1 Manual de usuario

molex 19294-0008 Manual de usuario

Manuales populares de Herramientas de crimpado de otras marcas