Milwaukee MW14 Manual de usuario

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for

a period of two years from the date of purchase.

If during this period, the repair or replacement of parts is required, where the

damage is not due to negligence or erroneous operation by the user, please return

the parts to either dealer or our ofce and the repair will be effected free of charge.

Note: We reserve the right to modify the design, construction and appearance

of our products without advance notice.

SPECIFICATIONS:

MW 14

RANGE 0.00 to 5.00 ppm

RESOLUTION 0.01 ppm

ACCURACY ±0.04 ppm ±2% of reading @ 25 °C

TYPICAL EMC DEV. ± 0.01 ppm

LIGHT SOURCE Light Emitting Diode @ 525 nm

LIGHT DETECTOR Silicon Photocell

METHOD Adaptation of the EPA Phenantroline method

315B, for natural and treated waters. The re-

action between iron and reagent causes an

orange tint in the sample.

ENVIRONMENT 0 to 50°C (32 to 122 °F)

max. 95% RH non-condensing

BATTERY TYPE 1 x 1.5V AAA

AUTO-SHUT OFF After 3 minutes of non-use and 2

minutes after reading.

DIMENSIONS 81.5 x 61 x 37,5 mm (3.2 x 2.4 x 1.5 “)

WEIGHT 64 g (2,25 oz.)

OPTIONAL ACCESSORIES:

Reagent Sets

2720416 Iron powder reagent, 25 pcs.

Other Accessories

3000100 Glass cuvettes with caps (2 pcs)

3000200 Tissue fow wiping cuvettes (2 pcs)

3000300 1.5V AAA batteries (4 pcs)

USER MANUAL

IRON: HIGH RANGE

MODEL: MW14

PRELIMINARY EXAMINATION:

Please examine this product carefully. Make sure that

the instrument is not damaged. If any damage oc-

cured during shipment, please notify your Dealer.

Each MW 12 meter is supplied complete with:

• Two Sample Cuvettes and Caps

• Six powder reagents for Iron High Range

• 1 x 1,5V AAA Battery

• Instruction Manual

FUNCTIONAL DESCRIPTION:

1. Dust cover

2. Cuvette with cap

3. Cuvette holder

4. Liquid Crystal Display

5. Button

BATTERY REPLACEMENT:

To save the battery, the instrument shuts down after 3 minutes of non-

use and 2 minutes after reading. One fresh battery lasts for a mini-

mum of 5000 measurements, depending on the light level. When the

battery capacity is under 10 % “bAt” appears on the LCD at start-up.

If the battery is empty and accurate measurements can’t be taken any

more, the instrument shows “bAd” then “bAt” each for 1 second and

turns off. To restart the instrument, the battery must be replaced with

a fresh one.

To replace the instrument’s battery, follow the steps:

Turn the instrument off by holding the button until the meter shuts off.

OPERATION:

Turn the meter on by pressing the

button. After all the segments are

displayed, “C.1”, “Add” appears with

“Press” blinking, the meter is ready.

Fill the cuvette with 10 mL of unre-

acted sample and replace the cap.

Place the cuvette into the meter and

close the meter’s cap.

Press the button. When the display

shows “Add”, ”C.2” with “Press”

blinking the meter is zeroed.

Remove the cuvette, open it and add

the content of one packet of 2720416

reagent. Replace the cap and shake

gently for 2 minutes until the powder

is completely dissolved. Replace the

cuvette into the meter.

Wait for 3 minutes and then press the

button or press and hold the button

until the timer is displayed on the LCD.

The instrument directly displays the

concentration of iron in ppm. The me-

ter automatically turns off after 2 min-

utes.

•

Turn the instrument upside down

and remove the battery cover with

a screwdriver.

Remove the battery from its lo-

cation and replace it with a fresh

one.

Insert the battery cover and re-

place the screw with a screw-

driver.

•

Otros manuales de Instrumento de medición de Milwaukee

Milwaukee

Milwaukee 3421 Manual de usuario

Milwaukee

Milwaukee MW11 Manual de usuario

Milwaukee

Milwaukee Mi170 Manual de usuario

Milwaukee

Milwaukee 2010R Manual de usuario

Milwaukee

Milwaukee 2217-40 Manual de usuario

Milwaukee

Milwaukee MI 413 Manual de usuario

Milwaukee

Milwaukee SM101 Manual de usuario

Milwaukee

Milwaukee CALIBRATION 2238-20 Instrucciones de funcionamiento

Milwaukee

Milwaukee MI412 Manual de usuario

Milwaukee

Milwaukee MW180 MAX Manual de usuario

Milwaukee

Milwaukee SM801 Manual de usuario

Milwaukee

Milwaukee MC310 Manual de usuario

Milwaukee

Milwaukee MI 411 Manual de usuario

Milwaukee

Milwaukee MW801 Manual de usuario

Milwaukee

Milwaukee MW803 Manual de usuario

Milwaukee

Milwaukee MW301 Manual de usuario

Milwaukee

Milwaukee MW605 MAX Manual de usuario

Milwaukee

Milwaukee Mi451 Manual de usuario

Milwaukee

Milwaukee MA872 Manual de usuario

Milwaukee

Milwaukee MW13 Manual de usuario

Milwaukee

Milwaukee PRO Lux MW700 Manual de usuario

Milwaukee

Milwaukee MA881 Manual de usuario

Milwaukee

Milwaukee Smart PH Meter Manual de usuario

Milwaukee

Milwaukee PST MW100 PRO Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario