MadgeTech PRHTemp2000 Hoja de especificaciones

PRHTemp2000

Red 485

Dark Blue Pantone 289

Light Blue 58% of Pantone 289

Product User Guide

PRHTemp2000

Pressure, Humidity and Temperature Data Logger with LCD

PRHTemp2000

2To view the full MadgeTech product line, visit our website at www.madgetech.com.

Quick Start Steps ........................................................ 3

Product Overview ....................................................... 4

Display Overview.......................................................... 4

Software Installation ..................................................... 5

Device Operation.......................................................... 5

Computer Interface ...................................................... 6

Wall Mounting.............................................................. 6

Front Panel Overview.................................................... 7

Screen Descriptions ................................................... 8-9

Maintenance ............................................................. 10

General Speciﬁcations................................................ 11

Table of Contents

Product User Guide

Quick Start Steps

Please refer to the PRHTemp2000 Product Manual for full product details by going to

www.madgetech.com/product-documentation.

1. Install the MadgeTech 4 Software and USB Drivers onto a Windows PC.

2. Wire the data logger with the desired probes.

3. Connect the data logger to the Windows PC with the IFC200 (sold separately).

4. Launch the MadgeTech 4 Software. The pHTemp2000 will appear in the Connected

Devices window indicating the device has been recognized.

5. Select the start method, reading rate and any other parameters appropriate for the

desired data logging application. Once conﬁgured, click the Start icon and deploy the

data logger

6. To download data, connect the data logger to the windows PC with the IFC200, select

the device in the list, click the Stop icon, and then click the Download icon. A graph will

automatically display the data.

PRHTemp2000

Display Overview

Battery Power (Full, Half-full, Empty)

Memory Remaining (Empty, Half-full, Full)

Device is running

Device is stopped

Status Indicators

Delay start

Wait Icon (device is busy)

Device reset has occurred

External power present

Product Overview

The PRHTemp2000 is a pressure, temperature and humidity data logger with LCD display.

The convenient LCD provides access to the current pressure, temperature and humidity

readings, as well as minimum, maximum and average statistics.

Please refer to the PRHTemp2000 Product Manual for full product details by going to

www.madgetech.com/product-documentation.

LED Lights

LCD Display

Screen

Pressure Sensor

Power Jack

Temperature and

Humidity Sensor

Ventilation Holes

Communication

Jack

Up Key

Okay Key

Down Key

Cancel Key

Function Keys

Product User Guide

Device Operation

Connecting and Starting the data logger

- Once the software is installed and running, plug the interface cable into the data logger.

- Connect the USB end of the interface cable into an open USB port on the computer.

- The device will appear in the Connected Devices list, highlight the desired data logger.

- For most applications, select “Custom Start” from the menu bar and choose the desired

start method, reading rate and other parameters appropriate for the data logging

application and click “Start”. (“Quick Start” applies the most recent custom start options,

“Batch Start” is used for managing multiple loggers at once, “Real Time Start” stores the

dataset as it records while connected to the logger.)

- The status of the device will change to “Running”, “Waiting to Start” or “Waiting to

Manual Start”, depending upon your start method.

- Disconnect the data logger from the interface cable and place it in the environment to

measure.

Note: The device will stop recording data when the end of memory is reached or the device is stopped. At this point the

device cannot be restarted until it has been re-armed by the computer.

Downloading data from a data logger

- Connect the logger to the interface cable.

- Highlight the data logger in the Connected Devices list. Click “Stop” on the menu bar.

- Once the data logger is stopped, with the logger highlighted, click “Download”. You will

be prompted to name your report.

- Downloading will ofﬂoad and save all the recorded data to the PC

Software Installation

Installing the MadgeTech 4 Software

The MadgeTech 4 Software makes the process of downloading and reviewing data quick

and easy, and is free to download from the MadgeTech website.

1. Download the MadgeTech 4 Software on a Windows PC by going to:

www.madgetech.com/software-download.

2. Locate and unzip the downloaded ﬁle (typically you can do this by right clicking on the

ﬁle and selecting Extract).

3. Open the MTInstaller.exe ﬁle.

4. You will be prompted to select a language, then follow the instructions provided in the

MadgeTech 4 Setup Wizard to ﬁnish the MadgeTech 4 Software installation.

PRHTemp2000

Computer Interface

Wall Mounting

Fully insert the male connector of the IFC200 interface cable into the female receptacle of

the data logger. Fully insert the female USB connector into the USB. (Please see the Data

Logger Software manual for further information.)

*WARNING: Install driver before connecting a device using a USB for the ﬁrst time. See the

Software manual for further information.

Power Supply Cable Slot

Product User Guide

Front Panel Overview

Changing the display units

The PRHTemp2000 comes with factory default display units of °C for temperature, %RH for

humidity, and PSIA for pressure. These units can be easily changed by pressing the F3 but-

ton in the main screen and then selecting either F1 for temperature, F2 for humidity or F3

for pressure. After selecting a channel, the available units can be scrolled through by either

pressing the channel’s function key repeatedly or using the UP and DOWN keys.

Button pressing chain: Main Screen -> F3 -> F1(temp), F2(humidity) or F3(pressure) ->

function key repeatedly or UP and DOWN

Checking the memory status

A status icon appears on all screens representing memory, but further information includ-

ing percent memory left and number of readings taken can also be viewed. From the Main

Screen press the F1 key to enter the Status screens then press F2 to view memory status

information.

Button pressing chain: Main Screen -> F1 -> F2

Checking power status

A battery status and external power status (if available) icon appear on all screens, but per-

cent battery power remaining and external power presence as well as battery type, current

battery voltage, and current external voltage can also be viewed. From the Main Screen

press F4 to view the Device Conﬁguration Menu, F2 to access the power options, then F4

twice to view the Power Status screen, including battery power percent remaining and the

presence of external power. Battery type and battery voltage are also displayed, as well as

external power voltage (if connected).

Button pressing chain: Main Screen -> F4 -> F2 -> F4 -> F4

Changing the Contrast

The PRHTemp2000’s LCD screen contrast values can be changed in two ways. One method

is outlined in the Function Reference Guide. A faster, simpler way involves simultaneously

pressing the CANCEL and UP or DOWN button in any screen.

Button pressing chain: CANCEL + UP (to increase) or DOWN (to decrease)

PRHTemp2000

Screen Descriptions

Main Screen:

Displays last measured values.

F1 = STATUS: goes to status screens

F2 = STATS: shows statistics menu

F3 = UNITS: goes to unit selection screen

F4 = SETUP: shows device conﬁguration menu

CANCEL = no function

OK = no function

UP = scrolls channel readings (only available while using large text)

DOWN = scrolls channel readings (only available while using large text)

Status Screens (Run Parameters):

Displays information about run parameters including date of recording start (start date), time of

recording start (start time), stop date, stop time, recording rate, and current status.

For all status screens:

F1 = RUN: displays run parameters screen

F2 = MEM: displays memory status screen

F3 = TIME: displays time information screen

F4 = MORE: displays the second status screen

CANCEL = returns to main screen

OK = returns to main screen

UP = no function

DOWN = no function

Statistics Menu Screen:

Displays options available within the statistics menu.

F1 = CHAN: goes to screen that sorts statistics by channel

F2 = TYPE: goes to screen that sorts statistics by type

F3 = INFO: goes to Statistics Information Screen

F4 = EXIT: returns to main screen

CANCEL = returns to main screen

OK = returns to main screen

UP = no function

DOWN = no function

Product User Guide

Unit Selection Menu:

Displays units currently being used for each channel

F1 = TEMP: selects temperature channel for unit

change

F2 = HUMID: selects humidity channel for unit change

F3 = PRESS: selects pressure channel for unit change

F4 = OK: returns to Main Screen

Note: unit selection can be changed by pressing the corresponding function key repeatedly or

using the UP and DOWN arrows to select appropriate units.

CANCEL = returns to main menu without accepting changes

OK = accepts changes and returns to main menu

Device Conﬁguration Menu:

Displays options available within the device conﬁguration

menu.

F1 = DISPLAY: enters Adjust Visibility screen

F2 = POWER: enters Power Modes screen

F3 = INFO: goes to Device Information screens

F4 = EXIT: returns to main screen

CANCEL = returns to main screen

OK = returns to main screen

UP = no function

DOWN = no function

PRHTemp2000

BATTERY WARNING

This data logger contains a lithium battery. Do not cut the battery open,

incinerate, or recharge. Do not heat lithium batteries above the speciﬁed operating

temperature.* Dispose of the battery in accordance with local regulations.

*See the individual speciﬁcation sheets at www.madgetech.com.

Battery Information

Recalibration

The PRHTemp2000 standard calibration is one point at 25 °C, two points at 25 %RH and

75 %RH and two points at 14.7 PSI and 30 PSI.

Additional Services:

Custom calibration and veriﬁcation point options available, please call for pricing.

Call for custom calibration options to accommodate speciﬁc application needs.

Prices and speciﬁcations subject to change. See MadgeTech’s terms and conditions at www.madgetech.com

To send devices to MadgeTech for calibration, service or repair, please use the MadgeTech RMA Process by visiting

www.madgetech.com, then under the services tab, select RMA Process.

Device Maintenance

Materials: 3/32” HEX Driver (Allen Key) and a Replacement Battery (U9VL-J)

- Remove the back cover from the device by unscrewing the four screws.

- Remove the battery from its compartment and unsnap it from the connector.

- Snap the new battery into the terminals and verify it is secure.

- Replace the cover taking care not to pinch the wires. Screw the enclosure back together.

Note: Be sure not to over tighten the screws or strip the threads.

For any other maintenance or calibration issues, we recommend the unit be returned to the

factory for service. Before returning the device, you must obtain an RMA from the factory.

Battery Replacement

This product does not have any user-serviceable parts except the battery which should be

replaced periodically. The battery life is affected by battery type, ambient temperature,

sample rate, sensor selection, off-loads and LCD usage. The device has a battery status indi-

cator on the LCD. If the battery indication is low, or if the device seems to be inoperable, it

is recommended that the battery be replaced.

Otros manuales para PRHTemp2000

Tabla de contenidos

Otros manuales de Registrador de datos de MadgeTech

MadgeTech

MadgeTech UltraShock-EB-5 Manual de usuario

MadgeTech

MadgeTech TEMP1000EX Manual de usuario

MadgeTech

MadgeTech State101A Hoja de especificaciones

MadgeTech

MadgeTech Event101A Manual de usuario

MadgeTech

MadgeTech PR1000EX-30A Hoja de especificaciones

MadgeTech

MadgeTech HiTemp140-PT Series Hoja de especificaciones

MadgeTech

MadgeTech Volt101A-30V Hoja de especificaciones

MadgeTech

MadgeTech TCTemp1000 Manual de usuario

MadgeTech

MadgeTech octtemp 2000 Manual de usuario

MadgeTech

MadgeTech PRHTemp2000 Manual de usuario

MadgeTech

MadgeTech HiTemp140-FR Hoja de especificaciones

MadgeTech

MadgeTech HiTemp140X2 Series Hoja de especificaciones

MadgeTech

MadgeTech TempRetriever Manual de usuario

MadgeTech

MadgeTech TCTemp2000 Manual de usuario

MadgeTech

MadgeTech UltraShock Series Manual de usuario

MadgeTech

MadgeTech HiTemp140-FPST-36 Manual de usuario

MadgeTech

MadgeTech TC101A Manual de usuario

MadgeTech

MadgeTech RFCO2RHTemp2000A Hoja de especificaciones

MadgeTech

MadgeTech Process101A Manual de usuario

MadgeTech

MadgeTech EggTemp-RH Hoja de especificaciones

MadgeTech

MadgeTech PR2009 Hoja de especificaciones

MadgeTech

MadgeTech HiTemp140-PT Manual de usuario

MadgeTech

MadgeTech Temp1000 Manual de usuario

MadgeTech

MadgeTech PR1000 Hoja de especificaciones

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario

APLICOM

APLICOM A11 Manual de usuario