MadgeTech HiTemp140-M12 Hoja de especificaciones

Product User Guide

HiTemp140-M12

High Temperature Data Logger with an M12 Probe Connector

www. .com information@itm.com1.800.561.8187

Product User Guide

HiTemp140-M12 Data Logger

Product Overview .......................................... 2

Installation Guide ........................................... 3

Device Operation ........................................... 3

Wiring the Data Logger .................................. 4

Probe Connection .......................................... 4

Product Maintenance ..................................... 5

RMA Instructions ........................................... 5

General Speciﬁcations...................................... 6

Table of Contents

www. .com information@itm.com1.800.561.8187

HiTemp140-M12

Product Overview

The HiTemp140-M12 is a rugged and versatile high temperature data logger featuring an

M12 probe connector. Compatible with a wide variety of M12 RTD probe styles, this data

logger is capable of measuring up to 850 °C (1562 °F) (probe dependent).

All of MadgeTech’s HiTemp140 data loggers have a water tight body enclosure made of

food grade stainless steel and can be placed in environments with temperatures as high as

140 °C (284 °F). The operating range of the data logger body can be extended to higher

temperatures when used with MadgeTech’s thermal barrier options and a suitable probe.

The HiTemp140-M12 records and stores up to 43,690 time stamped readings and is

equipped with non-volatile solid state memory which retains data even if the battery

becomes discharged.

A wide selection of compatible M12 probes are available on the market to choose from,

making the HiTemp140-M12 the most dynamic data logger of its kind. With the ability to

change probes as needed, this device satisﬁes a multitude of application needs with one

powerful data logger versus the need for multiple loggers.

Note: Speciﬁc M12 wiring conﬁguration is required for compatibility. (see page 4)

Submergibility

The HiTemp140-M12 logger itself is rated IP40 and not submersible. It will inherit the IP

rating of the probe it is attached to, allowing for potential submergibility, depending upon

the probe.

O-Rings

O-ring maintenance is a key factor when properly caring for the HiTemp140-M12. The

O-rings ensure a tight seal and prevent liquid from entering the inside of the device. Please

refer to the application note “O-Rings 101: Protecting Your Data”, found on the MadgeTech

website, for information on how to prevent O-ring failure.

Trigger Settings

The device can be programmed to only record based off user conﬁgured trigger settings.

1. In the Connected devices panel, select the intended device to change the settings.

2. On the Device tab, in the Information group, click Properties. Users can also right-click

on the device and select Properties in the context menu.

3. Click Trigger and conﬁgure the Trigger settings. Trigger formats are available in Window

and Two Point (bi-level) mode. Window mode allows for one range of temperature

monitoring and two point mode allows for two ranges.

Note: This product is rated for use up to 140 °C. Please heed the battery warning. The product will explode if

exposed to temperatures above 140 °C (284ºF).

www. .com information@itm.com1.800.561.8187

Product User Guide

Installation Guide

Installing the Interface cable

- IFC400 or IFC406

Refer to the “Quick Start Guide” included in the package.

Installing the software

Follow the instructions provided in the Wizard to complete download

Device Operation

Connecting and Starting the data logger

- Once the software is installed and running, plug the interface cable into the docking

station.

- Connect the USB end of the interface cable into an open USB port on the computer.

- The device will appear in the Connected Devices list, highlight the desired data logger.

- For most applications, select “Custom Start” from the menu bar and choose the desired

start method, reading rate and other parameters appropriate for the data logging

application and click “Start”. (“Quick Start” applies the most recent custom start options,

“Batch Start” is used for managing multiple loggers at once, “Real Time Start” stores the

dataset as it records while connected to the logger.)

- The status of the device will change to “Running”, “Waiting to Start” or “Waiting to

Manual Start”, depending upon your start method.

- Disconnect the data logger from the interface cable and place it in the environment to

measure. Note: The device will stop recording data when the end of memory is reached or the device is

stopped. At this point the device cannot be restarted until it has been re-armed by the computer.

Downloading data from a data logger

- Place the logger into the docking station.

- Highlight the data logger in the Connected Devices list. Click “Stop” on the menu bar.

- Once the data logger is stopped, with the logger highlighted, click “Download”. You will

be prompted to name your report.

- Downloading will ofﬂoad and save all the recorded data to the PC.

www. .com information@itm.com1.800.561.8187

HiTemp140-M12

Wiring the Data Logger

HiTemp140-M12 connector is a 4 pin female M12 connection port which allows the user

to change probes as desired. The HiTemp140-M12 will inherit the IP rating of the probe it

is attached to, (up to, and including IP68/IP69K).

Probe Connection

Connecting probes to the HiTemp140-M12

Materials: 15 mm wrench, Compatible Probe with M12 Connector

1. Connect the probe to the data logger, using the wiring diagram above.

2. Use a 15 mm hex wrench to tighten the threads and secure the probe to the

data logger.

The HiTemp140-M12 is compatible with

probes that have the wiring conﬁguration

as shown to the left.

www. .com information@itm.com1.800.561.8187

Product User Guide

Product Maintenance

Battery Replacement

Materials: ER1425S-HT Battery

1. Unscrew the bottom of the logger and remove the battery.

2. Place the new battery into the logger. Note the polarity of the battery.

3. Screw the cover back onto the logger.

Recalibration

The HiTemp140-M12 standard calibrations are two points at 50 :and 150 :and is

verified at 100 :.

Prices and specifications subject to change.

To send devices to MadgeTech for calibration, service or repair, please use the MadgeTech RMA Process

RMA Instructions

To send a device back in to MadgeTech, follow the instructions below to create an

RMA (Return Merchandise Authorization) on the MadgeTech website:

 6nder the Services tab select RMA Process.

 When the web page opens, please sign in. If this is the first time, select Click here to

button and fill in all the blank fields.

 Complete the applicable fields on the form including customer Billing and Shipping

information, even if they are the same. Please see the field explanation below for a more

detailed description about questions asked in the Device Information section.

 When all of the fields are complete, click Generate RMA.

 Print out the confirmation page that follows containing the RMA number and

MadgeTech’s address for shipping. A Return Merchandise Authorization must be

accompanied by a copy of the RMA paperwork and shipping is prepaid by the

customer. The RMA number should be clearly marked on the outside of the package.

 Please ship the package via UPS, FedEx, TNT, or DHL to the address listed on the

confirmation page. USPS will not ship MadgeTech data loggers.

 A notification email will be automatically sent when MadgeTech has received the RMA.

Battery Warning

WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER

DISCHARGE, CRUSH, PENETRATE, OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 140ºC (284ºF).

Speci ications subject to change.

www. .com information@itm.com1.800.561.8187

HiTemp140-M12

Temperature Sensor Various RTD Probes with M12 Connector (Sold Separately)

Measurement Range 18 :to 400 :

-200 °C to +850 °C (-328 °F to +1562 °F) (Probe Dependent)

Temperature Resolution 0.0001 :

0.01 °C (0.018 °F) (Probe Dependent)

Calibrated Accuracy ±0.015 :

±0.05 °C (±0.09 °F) (Probe Dependent)

*Calibrated

Accuracy Range

18 :to 200 :

-200 °C to +265 °C (-328 °F to +509 °F)

Connector Type M12 Female, 4 Pin

Reading Rate 4 readings per second up to 1 reading every 24 hours

Memory 43,690 readings

Start Modes • Software programmable immediate start

• Delay start up to 18 months in advance

Stop Modes Manual or Timed (speciﬁc date and time)

Trigger Settings

High & Low limits may be set. Once data meets or exceed sets limits, the device will

record to memory. Bi-level start and stop triggers can also be programmed. Users can

specify the number of readings to take after the device triggers.

Readings in Trigger

Settings Mode 18,724 readings

Real Time Recording May be used with PC to monitor and record data in real time

Password Protection An optional password may be programmed into the device to restrict access

to conﬁguration options. Data may be read out without the password.

Memory Wrap Around Yes

Battery Type 3.6V high-temperature lithium battery included; user replaceable

Battery Life 1 year typical (1 minute reading rate)

Calibration Digital calibration through software

Calibration Date Automatically recorded within device

Data Format Date and time stamped °C, °F, °R, K

Time Accuracy ±1 minute/month at 25 ºC

Computer Interface IFC400 or IFC406 USB docking station required; 125,000 baud

Operating System

Compatibility XP SP3/Vista/Windows 7/Windows 8

MadgeTech Software

Compatibility

• MadgeTech Standard Software version 4.2.5.0

• MadgeTech Secure Software version 4.2.4.0 or later

Operating Environment -40 ºC to +140 ºC (-40 ºF to +284 ºF), 0 %RH to 100 %RH non-condensing,

0.002 PSIA to 60 PSIA

IP Rating IP40 - logger alone (with no probe connected). The logger will inherit IP rating of the

attached probe (up to, and including IP68/IP69K).

Dimensions (body) 2.15 in x 0.97 in x 0.97 in (54.5 mm x 24.6 mm x 24.6 mm)

Dimensions (probe) Probe dependent

Weight 85 g (3.0 oz)

Materials Body: 316 Stainless Steel

Approvals CE

HiTemp140-M12 General Speciﬁcations

&DOLEUDWHGDFFXUDFLHVEDVHGRQVWDQGDUG0DGJH7HFKFDOLEUDWLRQVIRUȍWRȍUDQJH

www. .com information@itm.com1.800.561.8187

Tabla de contenidos

Otros manuales de Registrador de datos de MadgeTech

MadgeTech

MadgeTech Temp101 Manual de usuario

MadgeTech

MadgeTech EggTemp-RH Manual de usuario

MadgeTech

MadgeTech Temp1000S Manual de usuario

MadgeTech

MadgeTech RFCurrent2000A Hoja de especificaciones

MadgeTech

MadgeTech TSR101 Series Manual de usuario

MadgeTech

MadgeTech HITEMP140-1 Hoja de especificaciones

MadgeTech

MadgeTech Temp101A Manual de usuario

MadgeTech

MadgeTech QuadTCTempV2 Hoja de especificaciones

MadgeTech

MadgeTech RTDTemp2000 Manual de usuario

MadgeTech

MadgeTech HiTemp140X2 Series Hoja de especificaciones

MadgeTech

MadgeTech Logicbus X Series Hoja de especificaciones

MadgeTech

MadgeTech Shock101-EB Hoja de especificaciones

MadgeTech

MadgeTech RFCO2RHTemp2000A Hoja de especificaciones

MadgeTech

MadgeTech TEMP1000EX Manual de usuario

MadgeTech

MadgeTech OctProcessV2 Hoja de especificaciones

MadgeTech

MadgeTech Pulse101A Hoja de especificaciones

MadgeTech

MadgeTech octtemp 2000 Manual de usuario

MadgeTech

MadgeTech PRTemp1000 Hoja de especificaciones

MadgeTech

MadgeTech Shock101-50 Hoja de especificaciones

MadgeTech

MadgeTech RFRTDTemp2000A Hoja de especificaciones

MadgeTech

MadgeTech RFOT Manual de usuario

MadgeTech

MadgeTech Temp1000IS Hoja de especificaciones

MadgeTech

MadgeTech Bridge101A-150 Manual de usuario

MadgeTech

MadgeTech PRTrans1000IS Series Hoja de especificaciones

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario

APLICOM

APLICOM A11 Manual de usuario