MadgeTech PR140 Hoja de especificaciones

PR140

High Temperature Pressure

Data Logger

PRODUCT

USER GUIDE

To view the full MadgeTech product line, visit

our website at madgetech.com.

TABLE OF CONTENTS

2Product Overview

2Installation Guide

2Device Operation

3Device Maintenance

4Need Help?

Product User Guide | 2

PR140

PRODUCT USER GUIDE

Product Overview

The PR140 can be used in both wet and dry applications

up to 140 °C indefinitely. Available with Flush or NPT

Pressure Port Top.

Water Resistance

The PR140 is fully submersible and is rated IP68. It can be

placed in environments with up to 230 ft (70 m) of water.

Installation Guide

Installing the Software

The Software can be downloaded from the MadgeTech

website at madgetech.com. Follow the instructions

provided in the Installation Wizard.

Installing the Docking Station

IFC400 or IFC406 (sold separately) — Connect the device

into a USB port with the interface cable. The drivers will

install automatically.

Device Operation

Connecting and Starting the Data Logger

1. Once the software is installed and running, plug the

interface cable into the docking station.

2. Connect the USB end of the interface cable into an

open USB port on the computer.

3. Place the data logger into the docking station.

4. The data logger will automatically appear under

Connected Devices within the software.

5. For most applications, select Custom Start from

the menu bar and choose the desired start method,

reading rate and other parameters appropriate for the

data logging application and click Start. (Quick Start

applies the most recent custom start options, Batch

Start is used for managing multiple loggers at once,

Real Time Start stores the dataset as it records while

connected to the logger.)

6. The status of the device will change to Running,

Waiting to Start or Waiting to Manual Start,

depending upon your start method.

7. Disconnect the data logger from the interface cable

and place it in the environment to measure.

Note: The device will stop recording data when the end of memory

is reached or the device is stopped. At this point the device cannot be

restarted until it has been re-armed by the computer.

Downloading Data from a Data Logger

1. Place the logger into the docking station.

2. Highlight the data logger in the Connected Devices

list. Click Stop on the menu bar.

3. Once the data logger is stopped, with the logger

highlighted, click Download. You will be prompted to

name your report.

4. Downloading will offload and save all the recorded

data to the PC.

Product User Guide | 3

PR140

PRODUCT USER GUIDE

Device Operation (cont’d)

Set Password

To password protect the device so that others cannot

start, stop or reset the device:

1. In the Connected Devices panel, click the device

desired.

2. On the Device Tab, in the Information Group, click

Properties. Or, right-click the device and select

Properties in the context menu.

3. On the General Tab, click Set Password.

4. Enter and confirm the password in the box that

appears, then select OK.

Device Maintenance

O-Rings

O-ring maintenance is a key factor

when properly caring for the PR140.

The O-rings ensure a tight seal and

prevent liquid from entering the

inside of the device. Please refer to

the application note O-Rings 101:

Protecting Your Data, found at

madgetech.com, for information

on how to prevent O-ring failure.

Battery Replacement

Materials: ER14250MR-145 Battery

1. Unscrew the bottom of the logger and remove the

battery.

2. Place the new battery into the logger. Note the polarity

of the battery. It is important to insert the battery with

positive polarity pointing upward towards the probe.

Failure to do so could result in product inoperability or

potential explosion if exposed to high temperatures.

3. Screw the cover back onto the logger.

Recalibration

MadgeTech recommends annual recalibration. To send

devices back for calibration, visit madgetech.com.

Note: This product is rated for use up to 140 °C

(284 ºF). Please heed the battery warning. The

product will explode if exposed to temperatures

above 140 °C (284 ºF).

PR140

NEED HELP?

DOC-1244035-00 | REV 9 2020.06.12

6 Warner Road, Warner, NH 03278

(603) 456-2011

info@madgetech.com

madgetech.com

Product Support & Troubleshooting:

• Visit our Resources online at madgetech.com/resources.

• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com.

MadgeTech 4 Software Support:

• Refer to the built-in help section of the MadgeTech 4 Software.

• Download the MadgeTech 4 Software Manual at madgetech.com.

• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com.

Otros manuales de Registrador de datos de MadgeTech

MadgeTech

MadgeTech RFC1000 Manual de usuario

MadgeTech

MadgeTech PRTemp140 Hoja de especificaciones

MadgeTech

MadgeTech Shock101 Manual de usuario

MadgeTech

MadgeTech HiTemp140-FP-6 Hoja de especificaciones

MadgeTech

MadgeTech PRHTemp2000 Hoja de especificaciones

MadgeTech

MadgeTech HiTemp140-FP Hoja de especificaciones

MadgeTech

MadgeTech HiTemp140 Series Hoja de especificaciones

MadgeTech

MadgeTech MadgeNET RFTCTemp2000A Hoja de especificaciones

MadgeTech

MadgeTech PR2000 Manual de usuario

MadgeTech

MadgeTech Bridge101A-150 Manual de usuario

MadgeTech

MadgeTech HiTemp1400 Manual de usuario

MadgeTech

MadgeTech Temp1000P Manual de usuario

MadgeTech

MadgeTech VFC2000-MT Hoja de especificaciones

MadgeTech

MadgeTech RHTemp101 Manual de usuario

MadgeTech

MadgeTech PR1000IS Series Hoja de especificaciones

MadgeTech

MadgeTech PRHTemp2000 Manual de usuario

MadgeTech

MadgeTech HiTemp150-TSK Manual de usuario

MadgeTech

MadgeTech Volt101A-2.5V Hoja de especificaciones

MadgeTech

MadgeTech Titan S8 Hoja de especificaciones

MadgeTech

MadgeTech HiTemp150 Manual de usuario

MadgeTech

MadgeTech HiTemp140-FP Hoja de especificaciones

MadgeTech

MadgeTech Event101A Manual de usuario

MadgeTech

MadgeTech HiTemp140-PT Series Hoja de especificaciones

MadgeTech

MadgeTech MicroTemp Hoja de especificaciones

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario

APLICOM

APLICOM A11 Manual de usuario