Leica Viva TS16 Manual de usuario

Leica TS16

User Manual

Version 4.1

English

Introduction

Congratulations on the purchase of the Leica TS16.

This manual contains important safety directions as well as instructions for

setting up the product and operating it. Refer to 1 Safety Directions for fur-

ther information.

Read carefully through the User Manual before you switch on the product.

The content of this document is subject to change without prior notice. Ensure

that the product is used in accordance with the latest version of this docu-

ment.

Updated versions are available for download at the following Internet address:

https://myworld.leica-geosystems.com > myDownloads.

The model and serial number of your product are indicated on the type plate.

Always refer to this information when you need to contact your agency or

Leica Geosystems authorised service centre.

•Windows® is a registered trademark of Microsoft Corporation in the

United States and other countries

•Bluetooth® is a registered trademark of Bluetooth SIG, Inc.

•SD Logo is a trademark of SD-3C, LLC.

All other trademarks are the property of their respective owners.

This manual applies to the TS16.

Name Description/Format

TS16 Quick Guide Provides an overview of the product

together with technical data and

safety directions. Intended as a

quick reference guide.

ü ü

TS16 User Manual All instructions required in order to

operate the product to a basic level

are contained in the User Manual.

Provides an overview of the product

together with technical data and

safety directions.

-ü

Name Description/Format

Captivate Technical

Reference Manual

Overall comprehensive guide to the

product and apps. Included are

detailed descriptions of special soft-

ware/hardware settings and soft-

ware/hardware functions intended

for technical specialists.

-ü

Purchase

☞

Product identication

Trademarks

Validity of this

manual

Available

documentation

Refer to the following resources for documentation/software:

•the Leica Captivate USB documentation card

•https://myworld.leica-geosystems.com

Video tutorials are available on:

http://www.leica-geosystems.com/captivate-howto

On the last page of this manual, you can nd the address of Leica Geosystems

headquarters. For a list of regional contacts, please visit

http://leica-geosystems.com/contact-us/sales_support.

myWorld@Leica Geosystems (https://myworld.leica-geosystems.com)

offers a wide range of services, information and training material.

With direct access to myWorld, you are able to access all relevant services

whenever it is convenient for you.

Service Description

myProducts Add all products that you and your company own

and explore your world of Leica Geosystems: View

detailed information on your products and update

your products with the latest software and keep up-

to-date with the latest documentation.

myService View the current service status and full service his-

tory of your products in Leica Geosystems service

centres. Access detailed information on the services

performed and download your latest calibration cer-

ticates and service reports.

mySupport Create new support requests for your products that

will be answered by your local Leica Geosystems

Support Team. View the complete history of your

support requests and view detailed information on

each request in case you want to refer to previous

support requests.

myLearning Welcome to the home of Leica Geosystems online

learning! There are numerous online courses – avail-

able to all customers with products that have valid

CCPs (Customer Care Packages).

myTrustedServices Add your subscriptions and manage users for Leica

Geosystems Trusted Services, the secure software

services, that assist you to optimise your workow

and increase your efciency.

mySmartNet HxGN SmartNet is the GNSS correction service built

on the world’s largest reference station network,

enabling GNSS-capable devices to quickly determine

precise positions in the range of one to two centi-

metre accuracy. The service is provided 24/7 by a

highly-available infrastructure and professional sup-

port team with more than 10 years of experience

reliably delivering the service.

Leica Geosystems

address book

Service Description

myDownloads Downloads of software, manuals, tools, training

material and news for Leica Geosystems products.

Table of Contents

1 Safety Directions 7

1.1 General Introduction 7

1.2 Denition of Use 8

1.3 Limits of Use 8

1.4 Responsibilities 8

1.5 Hazards of Use 9

1.6 Laser Classication 12

1.6.1 General 12

1.6.2 Distancer, Measurements with Reectors 13

1.6.3 Distancer, Measurements without Reectors 13

1.6.4 Red Laser Pointer 15

1.6.5 Automatic Target Aiming (ATRplus) 17

1.6.6 PowerSearch (PS) 17

1.6.7 Electronic Guide Light (EGL) 18

1.6.8 Laser Plummet 18

1.6.9 AutoHeight Laser Plummet 19

1.6.10 Laser Guide 20

1.7 Electromagnetic Compatibility (EMC) 22

1.8 FCC Statement, Applicable in U.S. 23

1.9 ISED Statements (EN/FR), Applicable in Canada 25

2 Description of the System 26

2.1 System Components 26

2.2 System Concept 28

2.2.1 Software Concept 28

2.2.2 Power Concept 29

2.2.3 Data Storage Concept 30

2.3 Container Contents 31

2.4 Instrument Components 35

3 User Interface 38

3.1 Keyboard 38

3.2 Operating Principles 39

4 Operation 41

4.1 Setting Up the TS Instrument 41

4.2 Setting Up SmartStation 42

4.3 Setting Up SmartPole 43

4.4 Setting up for Remote Control (with the RadioHandle) 43

4.5 Setting up for Remote Control (with the TCPS29/30) 43

4.6 Fixing the Field Controller to a Holder and Pole 44

4.7 Fixing the CS35 Tablet to a Holder and Pole 46

4.8 Connecting to a Personal Computer 47

4.9 Power Functions 50

4.10 Batteries 51

4.10.1 Operating Principles 51

4.10.2 Battery for the TS Instrument 51

4.11 Working with the Memory Device 52

4.12 LED Indicators 53

4.13 Guidelines for Correct Results 54

5 Check & Adjust 56

5.1 Overview 56

5.2 Preparation 57

Table of Contents 5

5.3 Combined Adjustment

(l, t, i, c and ATRplus)

5.4 Tilting Axis Adjustment (a) 60

5.5 Adjusting the Circular Level of the Instrument and Tribrach 62

5.6 Adjusting the Circular Level of the Prism Pole 63

5.7 Inspecting the Laser Plummet of the Instrument 63

5.8 Adjusting the Laser Guide 64

5.9 Servicing the Tripod 66

6 Care and Transport 67

6.1 Transport 67

6.2 Storage 67

6.3 Cleaning and Drying 68

6.4 Maintenance 68

7 Technical Data 69

7.1 Angle Measurement 69

7.2 Distance Measurement with Reectors 69

7.3 Distance Measurement without Reectors 70

7.4 Distance Measurement - Long Range (LO mode) 71

7.5 Automatic Target Aiming (ATRplus) 72

7.6 PowerSearch (PS) 73

7.7 LOC8 Theft Deterrence and Location Device (optional) 74

7.8 Overview Camera 74

7.9 SmartStation 74

7.9.1 SmartStation Accuracy 74

7.9.2 SmartStation Dimensions 75

7.10 Laser Guide Technical Data 76

7.11 Conformity to National Regulations 77

7.11.1 TS16 77

7.11.2 RadioHandle 78

7.11.3 LOC8 Theft Deterrence and Location Device (optional) 78

7.11.4 Dangerous Goods Regulations 79

7.12 General Technical Data of the Product 80

7.13 Scale Correction 86

7.14 Reduction Formulas 89

8 Software Licence Agreement/Warranty 92

6 Table of Contents

1 Safety Directions

1.1 General Introduction

The following directions enable the person responsible for the product, and

the person who actually uses the equipment, to anticipate and avoid opera-

tional hazards.

The person responsible for the product must ensure that all users understand

these directions and adhere to them.

Warning messages are an essential part of the safety concept of the instru-

ment. They appear wherever hazards or hazardous situations can occur.

Warning messages...

•make the user alert about direct and indirect hazards concerning the use

of the product.

•contain general rules of behaviour.

For the users‘ safety, all safety instructions and safety messages shall be

strictly observed and followed! Therefore, the manual must always be available

to all persons performing any tasks described here.

DANGER, WARNING, CAUTION and NOTICE are standardised signal words for

identifying levels of hazards and risks related to personal injury and property

damage. For your safety, it is important to read and fully understand the fol-

lowing table with the different signal words and their denitions! Supplement-

ary safety information symbols may be placed within a warning message as

well as supplementary text.

Type Description

DANGER Indicates an imminently hazardous situation

which, if not avoided, will result in death or

serious injury.

WARNING Indicates a potentially hazardous situation or

an unintended use which, if not avoided,

could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation or

an unintended use which, if not avoided,

may result in minor or moderate injury.

NOTICE

Indicates a potentially hazardous situation or

an unintended use which, if not avoided,

may result in appreciable material, nancial

and environmental damage.

☞Important paragraphs which must be

adhered to in practice as they enable the

product to be used in a technically correct

and efcient manner.

Description

About warning

messages

Safety Directions 7

1.2 Denition of Use

•Measuring horizontal and vertical angles

•Measuring distances

•Recording measurements

•Capturing and recording images

•Automatic target search, recognition and tracking

•Visualising the aiming direction and vertical axis

•Remote control of product

•Data communication with external appliances

•Measuring raw data and computing coordinates using carrier phase and

code signal from GNSS satellites (GNSS systems)

•Recording GNSS and point related data

•Computing with software

•Use of the product without instruction

•Use outside of the intended use and limits

•Disabling safety systems

•Removal of hazard notices

•Opening the product using tools, for example screwdriver, unless this is

permitted for certain functions

•Modication or conversion of the product

•Use after misappropriation

•Use of products with recognisable damage or defects

•Use with accessories from other manufacturers without the prior explicit

approval of Leica Geosystems

•Inadequate safeguards at the working site

•Aiming directly into the sun

1.3 Limits of Use

Suitable for use in an atmosphere appropriate for permanent human habita-

tion. Not suitable for use in aggressive or explosive environments.

WARNING

Working in hazardous areas, or close to electrical installations or sim-

ilar situations

Life Risk.

Precautions:

▶Local safety authorities and safety experts must be contacted by the per-

son responsible for the product before working in such conditions.

1.4 Responsibilities

Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica

Geosystems, is responsible for supplying the product, including the User

Manual and original accessories, in a safe condition.

Intended use

Reasonably

foreseeable misuse

Environment

Manufacturer of the

product

8 Safety Directions

The person responsible for the product has the following duties:

•To understand the safety instructions on the product and the instructions

in the User Manual

•To ensure that it is used in accordance with the instructions

•To be familiar with local regulations relating to safety and accident pre-

vention

•To inform Leica Geosystems immediately if the product and the applica-

tion become unsafe

•To ensure that the national laws, regulations and conditions for the oper-

ation of the product are respected

1.5 Hazards of Use

NOTICE

Dropping, misusing, modifying, storing the product for long periods or

transporting the product

Watch out for erroneous measurement results.

Precautions:

▶Periodically carry out test measurements and perform the eld adjust-

ments indicated in the User Manual, particularly after the product has

been subjected to abnormal use as well as before and after important

measurements.

DANGER

Risk of electrocution

Because of the risk of electrocution, it is dangerous to use poles, levelling

staffs and extensions in the vicinity of electrical installations such as power

cables or electrical railways.

Precautions:

▶Keep at a safe distance from electrical installations. If it is essential to

work in this environment, rst contact the safety authorities responsible

for the electrical installations and follow their instructions.

NOTICE

Remote control of product

With the remote control of products, it is possible that extraneous targets will

be picked out and measured.

Precautions:

▶When measuring in remote control mode, always check your results for

plausibility.

Person responsible

for the product

Safety Directions 9

WARNING

Lightning strike

If the product is used with accessories, for example masts, staffs, poles, you

may increase the risk of being struck by lightning.

Precautions:

▶Do not use the product in a thunderstorm.

WARNING

Distraction/loss of attention

During dynamic applications, for example stakeout procedures, there is a

danger of accidents occurring if the user does not pay attention to the envir-

onmental conditions around, for example obstacles, excavations or trafc.

Precautions:

▶The person responsible for the product must make all users fully aware of

the existing dangers.

WARNING

Inadequate securing of the working site

This can lead to dangerous situations, for example in trafc, on building sites

and at industrial installations.

Precautions:

▶Always ensure that the working site is adequately secured.

▶Adhere to the regulations governing safety, accident prevention and road

trafc.

CAUTION

Pointing product toward the sun

Be careful when pointing the product toward the sun, because the telescope

functions as a magnifying glass and can injure your eyes and/or cause damage

inside the product.

Precautions:

▶Do not point the product directly at the sun.

CAUTION

Not properly secured accessories

If the accessories used with the product are not properly secured and the

product is subjected to mechanical shock, for example blows or falling, the

product may be damaged or people can sustain injury.

Precautions:

▶When setting up the product, make sure that the accessories are correctly

adapted, tted, secured, and locked in position.

▶Avoid subjecting the product to mechanical stress.

10 Safety Directions

Otros manuales para Viva TS16

Tabla de contenidos

Otros manuales de Instrumento de medición de Leica

Leica

Leica Viva Manual de usuario

Leica

Leica GLOW800 Manual de usuario

Leica

Leica TPS 300 Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica tps1100 Manual de usuario

Leica

Leica RUNNER 20 Manual de usuario

Leica

Leica Racer 70 Manual de usuario

Leica

Leica DISTO D2 Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica 2700-B Manual de usuario

Leica

Leica Lino L2P5 Manual de usuario

Leica

Leica Lino ML90 Manual de usuario

Leica

Leica Viva TS16 Manual de usuario

Leica

Leica TC605 Manual de usuario

Leica

Leica iCON iCR70 Manual de usuario

Leica

Leica Nova MS60 Manual de usuario

Leica

Leica DISTO classic Manual de usuario

Leica

Leica ScanStation P50 Manual de usuario

Leica

Leica NA2 Manual de usuario

Leica

Leica DD Series Manual de usuario

Leica

Leica Disto E7100i Manual de usuario

Leica

Leica 3D Disto Manual de usuario

Leica

Leica DISTO E7500i Manual de usuario

Leica

Leica Lino P5 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario