Leica ICC50 Manual de usuario
Leica ICC 50 Manual 3
Contents
General Instructions 4
Safety concept 5
Symbols used 6
Safety regulations 7
The Leica ICC 50 9
Introduction 10
Unpacking 11
Get Ready! 12
Preparation for Use 13
Get Set! 15
Connection and Operation for Imaging
using a Windows-Computer 16
Capturing Images without a computer 17
How to handle SD memory cards 19
Using Analog Video without a computer 20
Setting a new white balance for the ICC 50 21
Go! 22
Ready! Set! Go! 23
Care and Cleaning 24
Care and Cleaning 25
Specications 26
Leica ICC 50 camera module 27
Leica ICC 50 Manual 4
General Instructions
Safety concept
Before using your Leica ICC 50 camera for the
rst time, please read the "Safety concept"
brochure included with your instrument. It
contains additional information about handling
and care.
Use in clean rooms
The Leica ICC 50 camera can be used in clean
rooms without any problems.
Cleaning
ϘDo not use any unsuitable cleaning agents,
chemicals or techniques for cleaning.
ϘNever use chemicals to clean colored
surfaces or accessories with rubberized
parts. This could damage the surfaces,
and specimens could be contaminated by
abraded particles.
ϘIn most cases, we can provide special solu-
tions on request. Some products can be
modied, and we can oer other accesso-
ries for use in clean rooms.
Servicing
ϘRepairs may only be carried out by Leica
Microsystems-trained service technicians.
Only original Leica Microsystems spare
parts may be used.
Responsibilities of person in charge of
instrument
ϘEnsure that the Leica stereomicroscope
is operated, maintained and repaired by
authorized and trained personnel only.
Leica ICC 50 Manual 5
Safety concept
The Leica ICC 50 camera include an interactive
CD-ROM with all relevant user manuals. Keep
it in a safe place, and readily accessible to the
user. User manuals and updates are also avail-
able for you to download and print from our
web site at www.leica-microsystems.com.
This operating manual describes the special
functions of the individual modules of the
Leica DM stereomicroscopy series and contains
important instructions for their operational
safety, maintenance, and accessories.
The "Safety concept" booklet contains addi-
tional safety information regarding the service
work, requirements and the handling of stereo-
microscope, accessories and electrical accesso-
ries as well as general safety instructions.
You can combine individual system articles
with articles from external suppliers (e.g. cold
light sources, etc.). Please read the user manual
and the safety requirements of the supplier.
Before installing, operating or using the instru-
ments, read the user manuals listed above. In
particular, please observe all safety instructions.
To maintain the unit in its original condition
and to ensure safe operation, the user must
follow the instructions and warnings contained
in these user manuals.
Leica ICC 50 Manual 6
Symbols used
Warning of a danger
•This symbol indicates especially impor-
tant information that must be read and
complied with. Failure to comply can cause the
following:
ϘHazards to personnel
ϘFunctional disturbances or damaged
instruments
Warning of hazardous electrical voltage
This symbol indicates especially impor-
tant information that, if not observed,
can cause the following:
ϘHazards to personnel
ϘFunctional disturbances or damaged
instruments.
Danger due to hot surface
This symbol warns against touching hot
surfaces, e.g. those of light bulbs.
Important information
This symbol indicates additional infor-
mation or explanations that intend to
provide clarity.
Leica ICC 50 Manual 7
Safety regulations
Description
The individual modules fulll the highest
requirements for observation and documenta-
tion of the Leica ICC 50 camera.
Designated use
ϘSee "Safety concept" booklet
Non-intended use
ϘSee "Safety concept" booklet
The devices and accessories described in this
operating manual have been tested for safety
and potential hazards. The responsible Leica
aliate must be consulted whenever the device
is altered, modied or used in conjunction with
non-Leica components that are outside of the
scope of this manual.
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims!
Location of use
ϘSee "Safety concept" booklet
ϘSet up the electrical components at least
10 cm from walls and combustible objects.
ϘAvoid large temperature uctuations,
direct sunlight and vibrations. These condi-
tions can distort measurements and micro-
graphic images.
ϘIn warm and warm-damp climatic zones,
the individual components require special
care in order to prevent the build up of
fungus.
Requirements for the owner/operator
ϘSee "Safety concept" booklet
Ensure that:
ϘThe Leica ICC 50 camera is operated, main-
tained and repaired by authorized and
trained personnel only.
ϘAll operators have read, understood and
observe this user manual, and particularly
the safety instructions.
Leica ICC 50 Manual 8
Safety regulations (continued)
Repair, service work
ϘSee "Safety concept" booklet
ϘOnly original Leica Microsystems spare
parts may be used.
ϘBefore opening the instruments, switch o
the power and unplug the power cable.
ϘTouching the live circuit can cause injury.
Transport
ϘUse the original packaging for shipping or
transporting the individual modules of the
Leica ICC 50 camera.
ϘIn order to prevent damage from vibrations,
disassemble all moving parts that (accord-
ing to the user manual) can be assembled
and disassembled by the customer and
pack them separately.
Installation in third-party products
ϘSee "Safety concept" booklet
Disposal
ϘSee "Safety concept" booklet
Legal regulations
ϘSee "Safety concept" booklet
EC Declaration of Conformity
ϘSee "Safety concept" booklet
Health risks
Workplaces equipped with stereomicroscopes
facilitate and improve the viewing task, but
they also impose high demands on the eyes
and holding muscles of the user. Depending on
the duration of uninterrupted work, asthenopia
and musculoskeletal problems may occur. For
this reason, appropriate measures for reduction
of the workload must be taken:
ϘOptimal arrangement of workplace, work
assignments and work ow (changing tasks
frequently).
ϘThorough training of the personnel, giving
consideration to ergonomic and organiza-
tional aspects.
The ergonomic design and construction of the
Leica DM stereomicroscopy series are intended
to reduce the exertion of the user to a mini-
mum.
Leica ICC 50 Manual 10
Thank you for purchasing the Leica ICC 50 Digi-
tal Camera Module from Leica Microsystems.
The Leica ICC 50’s exclusive design features
make it a truly versatile, high-quality digital
camera for educational and other routine appli-
cations.
•This instrument should only be used as
described.
Introduction
Tabla de contenidos
Otros manuales de Cámara digital de Leica
Leica
Leica V-Lux 30 Manual de usuario
Leica
Leica M11 Manual de uso y cuidado
Leica
Leica X2 Manual de usuario
Leica
Leica TL2 Manual de usuario
Leica
Leica Q3 Manual de usuario
Leica
Leica C-Lux 2 Manual de usuario
Leica
Leica CL Manual de usuario
Leica
Leica SL Manual de usuario
Leica
Leica M10- P ASC 100 Edition Manual del propietario
Leica
Leica R 4 s MOD. P Manual de usuario
Leica
Leica V-LUX Manual de usuario
Leica
Leica Q Manual de usuario
Leica
Leica M Manual de usuario
Leica
Leica M10- P ASC 100 Edition Manual de usuario
Leica
Leica D-LUX Manual de usuario
Leica
Leica M7 Manual de instrucciones
Leica
Leica D-Lux 4 Manual de usuario
Leica
Leica ICC50 HD Manual de usuario
Leica
Leica Q2 Manual de usuario
Leica
Leica S3 Manual de usuario
