Leica IC90 E Manual de usuario

Leica IC90 E

User Manual

Leica IC90 E User Manual 2

The Camera Remote Control (Standalone Kit)

Optional Remote Control 27

Viewing Images and Movies With the Optional Remote Control 28

Calling up the Camera Menu 29

COLOR (Automatic White Balance) 30

COLOR (Manual White Balance) 31

EXPOSURE 32

RESOLUTION 33

SETUP CAMERA (Camera Settings) 34

SETUP USER 35

SETUP ETHERNET 36

Pairing Cameras With Remotes 38

Go!

Ready! Set! Go! 40

Speciﬁcations

LeicaIC90 E 42

Dimensional Drawings 44

Contents

General Notes

Safety Concept 4

Symbols Used 5

Safety Instructions 6

Care and Maintenance

Care and Maintenance 10

The Leica IC90 E

Introduction 12

The Basics 13

Leica IC90 E: Overview 14

Camera Kit and Accessories 16

Get Ready!

Assembling the Camera

Get Set!

USB Mode – Capturing and Adjusting Images Using a Computer 20

HDMI Mode – Capturing Images Without a Computer or Without

a Wireless Device 22

Adjusting Settings While in SD Mode 24

Ethernet Mode – Capturing and Adjusting Images Using a Network 25

Leica IC90 E User Manual General Notes 3

General Notes

Leica IC90 E User Manual General Notes 4

Safety Concept

The Leica IC90 E is shipped with an interac-

tive CD-ROM, where you can ﬁnd all relevant

user manuals. Keep it in a safe place, and

readily accessible to the user. User manu-

als and updates are also available for you

to download and print from our web site

www.leica-microsystems.com.

The "Safety concept" booklet contains addi-

tional safety information regarding service

work, requirements and the handling of the

stereo microscope, electrical and other acces-

sories as well as general safety instructions.

You can combine individual system articles

with articles from external suppliers (e.g. cold

light sources, etc.). Please read the user manual

and the safety requirements of the supplier.

Before installing, operating or using the instru-

ments, read the user manuals listed above. In

particular, please observe all safety instructions.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

Leica IC90 E User Manual General Notes 5

Symbols Used

Read and understand user manual

before using this device.

Warning of a danger

•This symbol indicates especially impor-

tant information that must be read and

complied with. Failure to comply can cause the

following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Warning of hazardous electrical voltage

This symbol indicates especially impor-

tant information that, if not observed,

can cause the following:

OHazards to personnel

OFunctional disturbances or damaged

instruments

Danger due to hot surface

This symbol warns against touching hot

surfaces, e.g. those of light bulbs.

Important information

This symbol indicates additional infor-

mation or explanations that intend to

provide clarity.

Leica IC90 E User Manual General Notes 6

Safety Instructions

Safety concept

Before using your Leica IC90 E for the ﬁrst

time, please read the "Safety concept" booklet

included with your instrument. It contains addi-

tional information on handling and care.

Use in clean rooms

The Leica IC90 E can be used in clean rooms

without any problems.

Cleaning

ODo not use any unsuitable cleaning agents,

chemicals or techniques for cleaning.

ONever use chemicals to clean colored

surfaces or accessories with rubberized

parts. This could damage the surfaces,

and specimens could be contaminated by

abraded particles.

OIn most cases, we can provide special solu-

tions on request. Some products can be

modiﬁed, and we can oﬀer other accesso-

ries for use in clean rooms.

Servicing

ORepairs may only be carried out by Leica

Microsystems-trained service technicians.

Only original Leica Microsystems spare

parts may be used.

Responsibilities of person in charge of

instrument

OEnsure that the Leica camera is operated,

maintained and repaired by authorized and

trained personnel only.

Leica IC90 E User Manual General Notes 7

Safety Instructions (Continued)

Description

The individual modules fulﬁll the highest

requirements in terms of observation and

documentation with the Leica IC90 E.

Intended use

ORefer to the "Safety concept" booklet

included with your camera.

Non-intended use

ORefer to the "Safety concept" booklet

included with your camera.

The instruments and accessories described

in this manual have been safety-tested and

checked for possible hazards. The responsible

Leica aﬃliate must be consulted whenever

the instrument is altered, modiﬁed or used in

conjunction with non-Leica components that

are outside of the scope of this manual.

Unauthorized alterations to the instrument or

noncompliant use shall void all rights to any

warranty claims!

Installation location

ORefer to the "Safety concept" booklet

included with your camera.

OElectrical components must be placed at

least 10 cm away from the wall and from

ﬂammable substances.

OAvoid large temperature ﬂuctuations,

direct sunlight and vibrations. These condi-

tions can distort measurements and micro-

graphic images.

OIn warm and warm-damp climatic zones,

the individual components require special

care in order to prevent the build-up of

fungus.

Requirements to be met by the operator:

ORefer to the "Safety concept" booklet

included with your camera.

Ensure that:

OThe Leica IC90 E is operated, maintained

and repaired only by authorized and

trained personnel.

OAll operators have read, understood and

observe this User Manual, and particularly

the safety regulations.

Leica IC90 E User Manual General Notes 8

Safety Instructions (Continued)

Repairs, service work

ORefer to the "Safety concept" booklet

included with your camera.

OOnly original Leica Microsystems spare

parts may be used.

OBefore opening the instruments, switch oﬀ

the power and unplug the power cable.

OTouching the live electric circuit can cause

injury.

Transport

OFor shipping or transporting the individual

modules of the Leica IC90 E, use the original

packaging.

OIn order to prevent damage from vibrations,

disassemble all moving parts that (accord-

ing to the user manual) can be assembled

and disassembled by the customer and

pack them separately.

Installation in third-party products

ORefer to the "Safety concept" booklet

included with your camera.

Disposal

ORefer to the "Safety concept" booklet

included with your camera.

Legal requirements

ORefer to the "Safety concept" booklet

included with your camera.

EC Declaration of Conformity

ORefer to the "Safety concept" booklet

included with your camera.

Health risks

Workplaces equipped with stereo microscopes

make it easier to examine extremely small

structures, but they also impose high demands

on the eyes and holding muscles of the user.

Depending on the duration of uninterrupted

work at such a workplace, impaired vision and

problems with the musculoskeletal system

may occur. Therefore, corresponding measures

should be taken to reduce the strain:

OOptimal arrangement of workplace, work

assignments and work ﬂow (changing tasks

frequently).

OThorough training of the personnel, giving

consideration to ergonomic and organiza-

tional aspects.

Leica IC90 E User Manual Care and Maintenance 9

Care and Maintenance

Leica IC90 E User Manual Care and Maintenance 10

General

OFor good optical results, it is important to

keep optical components clean.

OAlways cover the microscope and the Leica

IC90 E with the dust cover included in the

delivery when the instrument is not in use.

OIf an optical surface is very dirty or

dusty, ﬂush it using a syringe or clean

it using a camelhair brush before attempt-

ing to wipe it oﬀ.

OOptical surfaces should be cleaned using

a lint-free cloth, lens cloth or cotton swab

soaked in methanol or a commercially

available glass cleaner. Do not use alcohol.

OAvoid excessive use of solvents. The lint-

free cloth, lens cloth or cotton swab should

be soaked with solvent, but not so wet that

solvent runs over the lens.

Danger of electric shock

Risk of electric shock. Removing the

cover of the Leica IC90 E camera or the

stand-alone kit exposes electrically live parts

which, if touched, can cause potentially fatal

injuries. Have technical service carried out by a

Leica Microsystems authorized dealer.

Care and Maintenance

Tabla de contenidos

Otros manuales de Cámara digital de Leica

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

Nikon

Nikon Coolpix 100 Manual de usuario