Labnet Prism R Manual de usuario

Lit M00502 July 2012 v2

C2500-R

C2500-R-230V

User Manual

Table of Content

1. Safety Precautions.............................................................. 1

1.1. Operation Safety Precautions..................................... 1

2. General Description ............................................................ 3

2.1. Features .................................................................... 3

3. Getting Started .................................................................... 3

3.1. Unpacking.................................................................. 3

3.2. Initial Operation.......................................................... 4

3.3. Opening and Closing the Lid ...................................... 5

3.4. Loading the Rotor ...................................................... 5

3.5. Starting and Stopping a Run....................................... 6

3.6. Emergency Lid Release ............................................. 7

4. Overview.............................................................................. 8

5. Operation............................................................................10

5.1. Setting the Time (TIME) ............................................10

5.2. Setting the Speed (RPM)...........................................10

5.3. Setting the Centrifugal Force (RCF) ..........................11

5.4. Setting the Temperature (TEMP) ...............................11

5.5. Cooling .....................................................................11

5.6. Quick-Spin Operation................................................13

5.7. Changing the Settings During a Run .........................13

6. Service and Maintenance...................................................13

6.1. Centrifuge Service ....................................................13

6.2. Cleaning the Centrifuge.............................................14

6.3. Cleaning the Rotor....................................................14

6.4. Disinfection ...............................................................14

6.5. Replacing the Rotor ..................................................14

6.6. Replacing fuses ........................................................15

7. Troubleshooting.................................................................15

Appendix A: Technical Specifications ........................................17

Appendix B: Warranty..................................................................18

Prism R Refrigerated Microcentrifuge 1

1. Safety Precautions

Before using the Prism R refrigerated microcentrifuge for the first

time, please read this entire operating manual carefully. To guarantee

problem free, safe operation, it is essential to observe the following

points:

1.1. Operation Safety Precautions

1. When using infectious, radioactive, toxic and other solutions

which may pose health risks, please observe the appropriate

safety precautions.

2. Do not use this machine in a potentially explosive environment

or with potentially explosive chemicals.

3. Install the machine in location free of excessive dust.

4. Avoid placing the machine in direct sunlight.

5. Choose a flat, stable surface capable of withstanding the

weight of the machine.

6. Install the machine in the room temperature 15~30°C, relative

humidity 20~80%.

7. Don’t block the air vents.

8. Make sure the power source conforms to the required

power supply specifications.

9. To avoid electric shock, make sure the machine is plugged

into a grounded electric outlet.

10. Do not allow water or any foreign objects to enter the various

openings of the machine.

11. Switch off the power switch before cleaning or performing any

service on the machine, such as replacing the fuses.

12. The rotor and the rotor lid must always be installed

securely on the motor shaft.

13. Always load the rotor symmetrically. Each tube should be

counterbalanced by another tube of the same type and

weight.

14. To guarantee sufficient ventilation, ensure that the

centrifuge has at least 30 cm of free space on all sides,

including the rear.

15. Repair should be carried out by Labnet International'

authorized service personnel only.

16. Use original spare parts and accessories only.

Warning Label: Please be aware of the danger of electric shock

or other dangers.

Prism R™ Refrigerated Microcentrifuge 3

2. General Description

The Prism R refrigerated microcentrifuges is a compact, bench-top

centrifuge which is suitable for both research and clinical laboratories.

The motor is brushless and requires no routine maintenance. It is

supplied with a 24 x 1.5/2.0 ml rotor for micro samples. The maximum

speed of Prism R is 13,500 rpm (17,135 rcf). The temperature range

is from –10°C to 40°C.

2.1. Features

Brushless motor drive, control speed up to 13,500rpm/17,135xg

Powerful refrigeration system, maintain 4°C at max. speed

Includes unique easy access rotor (24 x 1.5ml)

Exceptionally quiet and compact

Optional StripSpin adapter available for 0.2ml tubes and strips

Compact, ergonomic design

User-friendly operation interface.

Quick button for instant run without setting

Low noise level

Complies with CE, RoHS

3. Getting Started

3.1. Unpacking

The centrifuge is delivered in an external carton and an internal

carton with protective PE foam cushions. Remove the centrifuge from

each carton. All packaging should be retained until it has been

established that the centrifuge is working properly.

Open the Prism R refrigerated microcentrifuge package and confirm

that all items are included:

Prism R unit with a 24 x 1.5/

2ml

rotor and a rotor lid

Operation manual

Electric fuses (7A &3.15A) Warranty card

Rotor wrench Power cord

If there are any items missing, damaged, or not according to your

order, please contact your distributor or sales representative

immediately.

Note: Please use 7A fuse in power source 100~120/50~60Hz

countries, while 3.15A fuse is for power source 200~230V/50~60Hz

countries.

3.2. Initial Operation

Place the machine on a stable, flat table. Please keep the machine at

least 30 cm from the surrounding area or objects.

Mains power and frequency “MUST”be compatible with the

information given on the product label on the rear of the centrifuge.

Connect the power cord to the power socket of the centrifuge, then to

the power source. Switch the Power On/Off switch to turn on the

centrifuge. After the LCD display is on and the buzzer beeps twice,

the centrifuge is ready to operate.

Prism R™ Refrigerated Microcentrifuge 5

3.3. Opening and Closing the Lid

The lid can be opened only when the centrifuge is powered on. Press

button to open the lid.

The lid will be locked automatically when the user presses down the

front edge of the lid.

Note: Do not slam the lid!

3.4. Loading the Rotor

For safety reasons, the rotor must be loaded with centrifuge tubes

symmetrically. The difference in the weight between the tubes should

not exceed 0.1 gram.

The centrifuge tubes should be loaded in pairs opposite each other

and each should contain roughly the equal weight of sample. One or

two additional loaded tubes may need to be added to achieve this.

Please refer Figure 1 to see an example of a properly loaded rotor.

Attention: To reduce air friction and noise, the rotor lid should

be attached to the rotor during centrifugation. Make sure that the

rotor lid snaps securely into place, by pressing down on center

catch.

Figure 1. Loading the rotor

3.5. Starting and Stopping a Run

Please refer Chapter 5 Operation to set up your preferred settings of

time, speed and temperature.

To start a run, press down the (START/STOP) knob.

When the pre-set time expires, the centrifuge will stop automatically.

To stop the centrifuge prior to the expiration of set time, press the

(START/STOP) knob again.

When the time is set as “continuous”( - - ), the centrifuge will run

continuously. To stop the continuous run, press the

(START/STOP) knob.

By pressing and holding the button, the centrifuge will continue a

Securing

screw

Prism R™ Refrigerated Microcentrifuge 7

short-run of set speed. The short-run will stop if the button is

released.

Note:

1. For safety reasons, the (START/STOP) knob will be

inactivated when the lid is open. A symbol “ ” will be

flashing until the lid is closed.

3.6. Emergency Lid Release

When the lid can’t be opened by pressing the button, users can

open the lid manually. First, turn off the power of the centrifuge.

Second, use a flat-head screw driver or other tool to remove the

Emergency Lid Release Plug ( Please refer Figure 2 ) on the

right-hand side of the machine. Third, pull the wire (attached to the

plug) while gently pushing downward on the lid. The lid willnow

release.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Labnet

Labnet

Labnet MPS 1000 Manual de usuario

Labnet

Labnet BioPette PLUS Manual de usuario

Labnet

Labnet Orbit S2020-P4-B Manual de usuario

Labnet

Labnet Spectrafuge 16M Manual de usuario

Labnet

Labnet D1200 Manual de usuario

Labnet

Labnet BioPette E BE20-1 series Manual de usuario

Labnet

Labnet Excel P3600L-10 Manual de usuario

Labnet

Labnet ProBlot Rocker 25 Manual de usuario

Labnet

Labnet Z100-A Manual de usuario

Labnet

Labnet BioPette Multichannel Manual de usuario

Labnet

Labnet C1301 Manual de usuario

Labnet

Labnet C1303-T Manual de usuario

Labnet

Labnet Prism Mini Manual de usuario

Labnet

Labnet Labpette FX Manual de usuario

Labnet

Labnet MPS 1001 Mini Plate Spinner Manual de usuario

Labnet

Labnet S0200 Manual de usuario

Labnet

Labnet Spectrafuge 16M Manual de usuario

Labnet

Labnet AccuPlate D0400 Manual de usuario

Labnet

Labnet Orbit S2030-LS-B-230 Manual de usuario

Labnet

Labnet D1100 Manual de usuario

Labnet

Labnet VorTemp 1550 Manual de usuario

Labnet

Labnet Rocker 35 EZ Manual de usuario

Labnet

Labnet MultiGene Mini Manual de usuario

Labnet

Labnet Orbit S2030-LS-B Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario