Labnet Enduro GDS II Manual de usuario

Labnet Enduro™GDS II and Enduro GDS Touch II

Gel Documentation System

Instruction Manual

Catalog Numbers:

GDS2-1302

GDS2-1365

GDST2-1302

GDST2-1365

2Visit www.labnetinternational.com for additional product and technical information.

Table of Contents

1. Introduction .................................................................................... 3

2. Safety and Regulatory Compliance ................................................................4

 3.Specications ................................................................................... 5

4. System Placement ...............................................................................5

5. Labnet Enduro™ GDS II Gel Documentation System Installation Guide ..............................6

6. Labnet Enduro GDS Touch II Gel Documentation System Installation Guide .........................8

7. Image Acquisition ...............................................................................9

8. Overview of Software Features ................................................................. 10

9. Optional Accessories ........................................................................... 13

10. Limited Warranty .............................................................................. 13

11. Product Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Visit www.labnetinternational.com for additional product and technical information.

1. Introduction

Congratulations on purchasing your Labnet Enduro™ GDS II or Enduro GDS Touch II Gel Documentation

System. The systems easily capture publication quality, 16 bit TIFF images. The systems are simple to set up

and have a straightforward user interface for image capture, annotation, and contrast adjustment. Images

are easily saved and opened in common gel analysis software for more detailed analysis.

The Labnet Enduro GDS II Gel Documentation System includes the following components:

 LabnetEnduroGDSIIGelDocumentationSystemcabinet,includingthecameraandorangelter

A-to-A male USB cable

Quick Installation Guide and Quick Imaging Guide

Labnet test target

 LabnetUSB(includesimagingsoftware,calibrationles)

 3-powercables:110V/220V(US/EU/UK).Pleaseselectthecorrectoneforyourregion.

The Labnet Enduro GDS Touch II Gel Documentation System includes the following components:

 LabnetEnduroGDSTouchIIGelDocumentationSystemcabinet,includingthecameraandorangelter

 Tabletcomputer(includesimagingsoftware,calibrationles)

Quick Installation Guide and Quick Imaging Guide

Labnet test target

 3-powercables:110V/220V(US/EU/UK).Pleaseselectthecorrectoneforyourregion.

For General Laboratory Use Only

This instrument is suitable for general laboratory use only. Therefore, it must be used only by personnel who

know the health risks associated with the reagents that are normally used with this instrument.

Voltage Setting Information

The Labnet Enduro GDS II and Enduro GDS Touch II systems have a power supply that automatically chooses

the correct voltage for your country or region.

Protection category: IP20 according to IEC 60529

4Visit www.labnetinternational.com for additional product and technical information.

2. Safety and Regulatory Compliance

Important Safety Information

Please read these instructions before operating the Labnet Enduro™ Gel Documentation Systems: Enduro

GDSII-302andEnduroGDSII-365(Cat.Nos.GDS2-1302andGDS2-1365,respectively),andtheEnduroGDS

TouchII-302andEnduroGDSTouchII-365(Cat.Nos.GDST2-1302andGDST2-1365,respectively).

UV Safety Precautions

TheEnduroGDSIIandEnduroGDSTouchIIsystemscomewithabuilt-inultraviolet(UV200to400nm)

transilluminator inside the system. Exposure to UV radiation can cause permanent damage to the eyes and

skin.Thesystemenclosureconnestheradiationwithinthesystemandshieldstheuserfromexposure.The

system is also equipped with a two-way safety interlock switch that automatically cuts off the power to the

transilluminator when the door is open during normal use.

 AlwayswearUV-protectiveeyewearthatisspeciedbythemanufacturerasprovidingprotectionatthe

wavelength(s)used,makingsurethattheeyewearprotectsanyareaswhereradiationmaycomethrough

(UVsunglassesmaynotpreventUVradiationfromcominginthroughthesidesoraroundthelenses).

Always cover all skin that may be exposed to UV light, especially the face, neck, hands, and arms.

Always make sure that any UV protection devices (such as the safety switch on the light cabinet

apparatus)areworkingproperly.Ifnot,discontinueuseuntilthedevice(s)areproperlyrepaired.

Use only UV lamps in the transilluminator.

Electrical Safety Precautions

Be sure to take proper precautions when handling any electrical equipment. NEVER work on any live circuit,

xture,receptacle,orswitch.Safetyrulesyoushouldfollowwheneverworkingwithanyelectricalappliance

include:

Always shut off power at the main disconnect before changing a fuse.

 Alwaysshutoffpowertothecircuitbeforerepairingorreplacingaswitch,receptacle,orxture.

Always tape over the main switch, empty fuse socket, or circuit breaker you are working on.

Always check that the circuit is dead before beginning work on it. Using a circuit tester or voltmeter can

help you determine this.

Always unplug any appliance before repairing it.

Protective Earth Terminal

The earth terminal, intended for connection to an external protective conductor for protection against

electric shock in case of a fault, is located on the inside of the back panel.

Hot Surface Warning

Under normal conditions, the temperature of the glass surface of the UV transilluminator is below 50°C and

safe to touch. However, if the system malfunctions, it is possible that the glass surface temperature exceeds

80°C. Please exercise caution when touching the glass surface with your hand when this occurs.

CAUTION Becauseultraviolet(UV)radiationcancauseserious

damage to unprotected eyes and skin, we recommend

wearing UV glasses or a face shield.

Visit www.labnetinternational.com for additional product and technical information.

Labnet System

Labnet Enduro™ GDS II

Gel Documentation System

Labnet Enduro GDS Touch II

Gel Documentation System

Camera 2.7 MP image resolution 2.7 MP image resolution

Lens f/1.8 f/1.8

Light Sources Epi White

302 or 365 nm Transilluminator

Epi White

302 or 365 nm Transilluminator

Epi Blue

Trans White Light

Illumination Tray

Optional Optional

Field of View 15 x 20 cm 15 x 20 cm

Cabinet Door sensor to prevent accidental exposure

to UV; automatically shuts off UV light when

door is open

Safety override, enabling band cutting on the

UV transilluminator with automatic turn off

after 5 minutes

Door sensor to prevent accidental exposure to UV;

automatically shuts off UV light when door is open

Safety override, enabling band cutting on the UV

transilluminator with automatic turn off after 5

minutes

Emission Filter 590 nm 590 nm

3-position Filter Slider No Yes

Certications CE, cTUVus CE, cTUVus

Product Footprint 12”x15”(30.48x38.1cm) 12”x15”(30.48x38.1cm)

Computer Operating system: Windows® 7 1 gigahertz

(GHz)orfaster32-bit(x86)or64-bit(x64)

processor(Intel),2gigabyte(GB)RAM

(32-bit)or4GBRAM(64-bit),16GBavailable

harddiskspace(32-bit)or20GB(64-bit)

Operating system: Windows® 10 Processor:

1gigahertz(GHz)orfasterprocessor(Intel),

RAM:2gigabyte(GB)for32-bitor4GBfor

64-bit, Hard disk space: 16 GB for 32-bit OS

20 GB for 64-bit OS

Minimum hardware requirements: 1.4 GHz

processor speed, 2 GB RAM, 16 GB free hard

diskspace,2USBs(cameraandprinter)

Tablet included: Windows 8 tablet computer enables

compatibility with existing networks, as well as easy

setup

Bluetooth and wireless compatible, or USB to LAN

compatible

10.1” touch screen

2 GB of storage for short-term data saving

3. Specications

4. System Placement

Pleasemakesurethesystemislocatedawayfromregularexposuretowater,solvents,orcorrosivematerial.Placeonaatandstable

surfacewith10cmclearanceonallsides,includingthetop,toallowsufcientairow.

The system is intended for indoor use with the following ambient conditions:

a. Altitude up to 2,000 m

b. Temperature 5°C to 40°C

c. Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C

Thesystemshouldbeplacedawayfrominterferingelectricalsignalsandmagneticelds.Ifpossible,adedicatedelectricaloutletshouldbe

used to eliminate electrical interference from other instrumentation in your laboratory.

6Visit www.labnetinternational.com for additional product and technical information.

5. Labnet Enduro™GDS II Gel Documentation System Installation Guide

Remove the Labnet Enduro

GDS II Gel Documentation

System from its packaging.

Identify the Labnet USB and

connect it to a Microsoft®

Windows® 7, 8, or 10

computer.

OntheUSB,ndthefolder

“Enduro Imaging Files\

Enduro_v_XXX” and open it.

Double click on the Setuple.

(You may see a message pop

up that says “Do you want to

allow the following program

from an unknown publisher

to make changes to this

computer?” Select Yes.)

Click Next to begin the Setup

Wizard.

Select Enduro GDS II, then click

Next.

Select your installation

location, then click Next.

Click Install to continue with

the installation.

Click Next to begin the driver

installation.

To continue, accept the license

agreement. Then click Next.

Select the UV wavelength of

the system.

After the installation is

complete, click Finish.

2. 3. 4.

5. 6. 8.

9. 10. 11. 12.

To continue, accept the license

agreement. Then click Next.

Visit www.labnetinternational.com for additional product and technical information.

Click Finish to exit the Setup

Wizard.

Plug the system into an

available outlet.

5. Labnet Enduro™GDS II Gel Documentation System Installation Guide (continued)

13.

Connect the A-to-A USB cable

to both the system USB and

the computer. On the Labnet

system, ensure the USB is

plugged into the lower USB

on the right hand side of

the instrument.

Power on the Labnet Enduro

GDS II system using the switch

in the back. Wait about 20

seconds before proceeding to

the next step.

Launch the capture software. Thersttimeyourunthe

Enduro Capture Software,

you will receive the message

above. Click Allow Access.

14. 15. 16.

17. 18. 19. 20.

Find the “Master”folder

within the “System Calibration

Folder.” Copy the Master folder,

and paste it in C:\Enduro

Imaging Files\Enduro_v_XXX.

When asked if you would like

to replace the existing folder,

select Yes.

*Note: if you cannot see the

Program Data folder, please

make sure you can view

“hidden”lesinWindows®.

On the Labnet USB, locate the

folder “Enduro Imaging Files\

System Calibration Folder

AXXXXX.”

8Visit www.labnetinternational.com for additional product and technical information.

6. Labnet Enduro™GDS Touch II Gel Documentation System Installation Guide

Remove the Labnet Enduro GDS

Touch II Gel Documentation

System from its packaging.

Locate the tablet computer. Remove the wing nuts from

the back of the tablet.

Mount the tablet on the

system.

Secure the tablet in place with

the wing nuts.

Connect the mini-USB cable to

the tablet.

Connect the power cable to

the tablet.

Power on the system using the

switch on the back.

Power on the tablet. Launch the capture software.

Plug the system into an

available outlet.

1. 2. 3. 4.

5. 6. 7. 8.

9. 10. 11.

Visit www.labnetinternational.com for additional product and technical information.

7. Image Acquisition

1. After the acquisition software is launched, select the Darkroom tab.

2. Place your sample in the imager. The capture software will be in “Live” mode to allow you to position

your sample.

3. Close the cabinet door.

4. Select your light source.

Here is a quick guide to select your light source:

System

Labnet Enduro™ GDS II

Gel Documentation System

Labnet Enduro GDS Touch II

Gel Documentation System

EtBr Gel UV 302 or 365 UV 302 or 365

Sybr Safe Gel UV 302 or 365 Epi Blue

Coomassie Gel* Visible Visible

*Requires optional white light tray.

5. Select exposure time. If you are not sure of your exposure time, select Auto Exposure. Otherwise, you

can select a time using the exposure slider.

6. A preview of your image will be displayed. If the image is acceptable, select Image Capture. Otherwise

you can continue to modify the exposure time.

7. When you are done, your image will be displayed in the home tab. You can now save your image.

10 Visit www.labnetinternational.com for additional product and technical information.

8. Overview of Software Features

Open

Open a previously saved image.

Save

Save allows you to perform one of three actions:

Save – save the currently active image

Save as – allows you to save the currently

activeimageunderanotherlename

Save all – saves all open images

Print active image.

Allows you to email the active image. Please see

“Email Settings” in the Settings section of this

guide.

Resize

An image can be resized up to 3 times its

original size.

Crop

When you select the crop tool, a crop window

will appear over your image. Drag the corners of

the crop window to your desired size, and then

select “Crop ROI” from the bottom of the screen.

If you do not want to crop, select “Cancel.”

Rotate

Rotate allows you to rotate your image one of

four ways:

Right 90 degrees

Left 90 degrees

Flip horizontal

Flip vertical

Image Info

Captures some of the information on how your

image was captured, including the date and

time captured, and exposure time. Additionally,

it tells you the light source and calibration value.

Zoom In

Zoom in on center of image

Zoom Out

Zoom out from center of image

Zoom Fit

Adjustszoomtollwindow.Displays%inthe

lower left corner of the window.

Auto Contrast

Calculates a balanced contrast ratio.

Manual Contrast

Allows you to manually adjust the black and

white levels of your image.

Invert

Gives the inverse of the image.

Display Saturation

Saturated pixels are displayed in red.

Home Tab

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Labnet

Labnet

Labnet Excel P3600L-10 Manual de usuario

Labnet

Labnet MPS 1001 Mini Plate Spinner Manual de usuario

Labnet

Labnet C0336 Manual de usuario

Labnet

Labnet FASTPETTE PRO Manual de usuario

Labnet

Labnet BioPette A Series Manual de usuario

Labnet

Labnet FastPette Pro Manual de usuario

Labnet

Labnet ProBlot 6 Manual de usuario

Labnet

Labnet D1200 Manual de usuario

Labnet

Labnet 311DS Manual de usuario

Labnet

Labnet Spectrafuge 24D Manual de usuario

Labnet

Labnet Orbit S2030-LS-B Manual de usuario

Labnet

Labnet Spectrafuge 6C Manual de usuario

Labnet

Labnet Hermle Z 446 K Manual de usuario

Labnet

Labnet Spectrafuge 6C Manual de usuario

Labnet

Labnet ProBlot Rocker 25 Manual de usuario

Labnet

Labnet Spectrafuge 16M Manual de usuario

Labnet

Labnet Spectrafuge 16M Manual de usuario

Labnet

Labnet 25 Manual de usuario

Labnet

Labnet BioPette PLUS Manual de usuario

Labnet

Labnet ENDURO96 E1010-9611 Manual de usuario

Labnet

Labnet MPS 1000 Manual de usuario

Labnet

Labnet I-4001-HCS Manual de usuario

Labnet

Labnet Prism R Manual de usuario

Labnet

Labnet H5500 Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario