Krell Industries S-1200 Guía de inicio rápido
S-1200/ S-1200U OWNER’S REFERENCE
S-1200/ 1200U Reference Surround Sound Preamp / Processor
2 © 2009 by Krell Industries LLC All rights reserved
THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Please contact your authorized dealer, distributor, or Krell if you have any questions not addressed
in this reference manual.
WARNING: Do not place the component where it could be exposed to dirt or excessive moisture.
The ventilation grids on the top and bottom of the S-1200/ 1200U must be unobstructed at all
times. Do not place flammable material on top of or beneath the component.
When making connections to this or any other component, make sure all components are off. Turn
off all system power before connecting the S-1200/ 1200U to any other component. Make sure
all cable terminations are of the highest quality, free from frayed ends, short circuits or cold solder
joints.
CONTACT INFORMATION: Krell Industries, LLC
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
WEBSITE http://www.krellonline.com
Krell® is a registered trademark of Krell Industries LLC., and is restricted for use by Krell Industries LLC., its subsidiaries, and authorized agents.
All other trademarks and tradenames are registered to their respective companies.
Manufactored under license from Dolby Laboratories. Dolby Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.
Table of Contents
3S-1200/ 1200U
Introduction (9)
Specications (10)
Getting Started (13)
UNPACKING AND PLACEMENT (13)
1. Accessories included
AC Power guidelines (13)
Back Panel Description (Diagram) (14)
Front Panel and Remote Control Function (Diagram) (15)
Initial Setup (16)
OSD (On Screen Display) (16)
1. Connection and Operation of the OSD (16)
2. AC Power cord connection (16)
3. Video output Connection (16)
5. Power Button (16)
6. Menu Button (16)
Main Menu, Navigation and Setup (17)
CONFIGURE VIDEO OUTPUT (S-1200U only) (17)
1. Overview (17)
2. OSD Default Output (17)
3. Analog Video Scaler (17)
A. Setting maximum Video output resolution (17)
Table of Contents Cont...
4 S-1200/ 1200U
LISTENING ROOM SETUP (18)
1. Overview (18)
2. Configure Speakers (18)
A. Quantity (18)
B. Full Range (18)
C. LIM (?) Hz (18)
D. Front (19)
E. Center (19)
F. Surround (19)
G. Back (19)
H. 7.1 Surround (19)
I. Subwoofer (20)
3. Speaker Distance (21)
A. Left ,Right (21)
B. Center (21)
C. L Surr, R Surr (21)
D. L Back, R Back (21)
E. Sub (21)
4. Calibrate Room Setup (22)
A. Auto Noise Sequence (22)
B. Manual Noise Sequence (22)
C. Program Material (22)
CONFIGURE DEVICES (23)
1. Overview (23)
A. Defining inputs and outputs for audio and video sources (23)
B. Video input and output connections (23)
1. Digital Video Options (23)
a. HDMI
2. Analog Video Options (23)
a. Component Video
b. S-Video
c. Composite Video
Table of Contents Cont...
5S-1200/ 1200U
C. Audio Input and Output connections (24)
1. Digital Audio Options (24)
a. HDMI
b. Optical S/PDIF
c. Coaxial S/PDIF
2. Analog Audio Options (24)
a. Balanced
b. Single-Ended
c. Multi-Channel
2. Changing default input presets. (25)
3. Configure Video (25)
A. Assigning Video Inputs (25)
1. Setting the Main Video Input (25)
4. Configure Audio (26)
A. Assigning Audio Inputs (26)
1. Analog (26)
2. Digital (26)
3. Lip Sync (26)
4. EQ Memory (26)
B. Setting the Analog audio Input (26)
1. Analog (27)
2. Digital (27)
C. Choosing an Analog Decode Preference (27)
D. Auto Migration (28)
E. Choosing a Digital Decode Preference (28)
F. Assign Lip Sync Delay (30)
G. Assign EQ Memory (30)
Table of Contents Cont...
6 S-1200/ 1200U
5. Configure Trigger (31)
A. Overview (31)
B. Configure Trigger (31)
C. Delay (31)
CONFIGURE LEVEL ADJUSTMENT (32)
1. Overview (32)
2. Device Trim (32)
3. Analog Input Trim (32)
A. Anti-Clip
B. Input Gain
4. Music Mode Sub Trim (32)
5. DTS Control Trim (33)
6. PLII Control Trim (33)
7. Maximum Volume Limit (33)
OPERATION (34)
1. Overview (34)
2. OSD Operation (34)
A. OSD On Time (34)
B. Line Number (34)
C. Menu Back ground (34)
1. Transparent
2. Solid
D. LCD Contrast (34)
3. Audio Operation (34)
A. Mute Mode (34 )
B. Dolby Hold Mode (35)
C. DTS Mode Hold (35)
D. EX Auto Switching (35)
E. Dynamic Range (35)
Table of Contents Cont...
7S-1200/ 1200U
4. 7.1 Input Setup (35)
5. Program Remote (35)
6. System Information (36)
7. Room EQ Setup (36)
A. Overview (36)
B. Memory (36)
C. Channel (36)
D. Filter Parameters (36)
1. Type (36)
a. HPF (36)
b. LPF (37)
c. Notch (37)
d. Lshlf (37)
e. Hshlf (38)
f. Pking (38-39)
2. Frequency (39)
3. Shape (39)
4. Level (39)
E. Apply (39)
Basic Operation of the S-1200/ 1200U (40)
1. Power On/ Off and Stand-By (40)
2. Volume Control (40)
3. Quick level adjustment buttons (40)
A. Center
B. Surr
C. Back
D. Sub
E. Bal
F. EQ assignment
Table of Contents Cont...
8 S-1200/ 1200U
4. Tape/ VCR inputs and outputs (41)
5. Button Mode Presets (41)
6. Save and Recall (41)
7. Factory Reset (41)
Firmware Updates (42)
Questions and Answers (43)
RS-232 and RC-5 Control (44)
Warranty (46)
Service (47)
Introduction to the KRELL S-1200/ 1200U
9S-1200/ 1200U
Thank you for your purchase of the S-1200/ 1200U Surround Sound Preamplifier/ Processor. Coupling legendary
Krell preamplifier technology, state of the art digital processing, and the latest in HDMI 1.3 surround formats, the
S-1200 is an ideal centerpiece for any high performance music and home theater system. Based on award-winning
preamplifier technology, all eight S-1200U analog output stages are built to the same exacting standard and feature
balanced and single-ended cable connections. Only Krell designed preamplifier circuitry is employed within every
channel utilizing discrete current based Class A, direct coupled circuitry for the greatest signal purity and highest
bandwidth. Performance robbing op amps or integrated circuits are not used anywhere in the audio path. Preamp
mode bypasses all digital circuitry and routes analog stereo inputs directly to a balanced resistor ladder volume
control for ultimate music reproduction.
The heart of Krell surround sound preamp/processors is sound quality that is paired to the latest in surround
processing technology. The S-1200 includes the finest Krell audio and video engineering plus the latest in
connectivity technology, HDMI 1.3, to insure the ultimate home theater experience. The audio signal path is a direct
descendant of the Evolution 707 Reference Surround preamp/processor. The S-1200 also uses the same DSP engine
and 1080p video stage from the Evolution 707.
At the hub of the S-1200 digital signal processing is a pair of dual core 32 bit Crystal CS497004 DSP’s performing
1.8 giga operations per second. Digital signals are then routed to 24 bit ESS Sabre DACS.
Video content is treated to the same high performance engineering as the audio signals. All-discrete video circuitry
takes full advantage of the new Deep Color HDMI 1.3 specifications. Maximum color depth has been increased from
24 bits to 48 bits and bandwidth from 165MHz to 340 MHz. Full video transcoding converts composite, S-Video,
or component inputs to HDMI signals. Furthermore, the S-1200U model includes upconversion to a maximum of
1080p resolution. The S-1200 is a true “one connection solution” with on-screen display, configuration menus, and
status messages available from all active video outputs including HDMI.
Specications
10 S-1200/ 1200U
SIGNAL-TO-NOISE RATIO “A” Weighted 96 dB
TOTAL HARMONIC DISTORTION (THD) Unweighted 20 Hz-20 kHz, +0, - 0.5 dB
INPUTS ANALOG AUDIO (1) Pair Balanced via XLR connectors
(5) Pairs Single-ended via RCA connectors
(1) Discrete 7.1 via RCA connectors
(1) Tape in via RCA connectors
(1) VCR audio in via RCA connectors
DIGITAL AUDIO (4) HDMI via HDMI connectors
(4) EIAJ optical via Toslink connectors
(4) Coaxial via RCA connectors
DIGITAL VIDEO (4) HDMI via HDMI connectors
ANALOG VIDEO (3) Component Video via RCA connectors
(4) S-video via DIN connectors
(3) Composite Video via RCA connectors
OUTPUTS
ANALOG AUDIO (8) Balanced via XLR Connectors
R, L, C, SR, SL, SBR, SBL, SW
(8) Single-ended via RCA Connectors
R, L, C, SR, SL, SBR, SBL, SW
(1) Tape out via RCA connectors
(1) VCR audio out via RCA connectors
DIGITAL AUDIO (1) EIAJ optical via TosLink connector
(1) Coaxial via RCA connector
DIGITAL VIDEO (1) HDMI via HDMI connector
ANALOG VIDEO (1) Component Video via RCA connectors
(1) S-video via DIN connectors
(1) Composite Video via RCA connector
CONTROL (1) IR Receiver for Remote Control
(1) RS-232 via DB9 Female Connector Straight Wired
(1) RC-5 via 1/8” stereo “trs” Receptacle
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Amplificador de Krell Industries
Krell Industries
Krell Industries Preamplifier KRC 2 Guía de inicio rápido
Krell Industries
Krell Industries KRC-3 Guía de inicio rápido
Krell Industries
Krell Industries FBI Manual de usuario
Krell Industries
Krell Industries KSP-7B Manual de usuario
Krell Industries
Krell Industries S-150m Manual de usuario
Krell Industries
Krell Industries KPE Manual de usuario
Krell Industries
Krell Industries Vanguard Series Guía de inicio rápido
Krell Industries
Krell Industries Evolution 600 Manual de usuario
Krell Industries
Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER Guía de inicio rápido
Krell Industries
Krell Industries Illusion Manual de usuario
Krell Industries
Krell Industries kSL-2 Guía de inicio rápido
Krell Industries
Krell Industries PHANTOM II Guía de inicio rápido
Krell Industries
Krell Industries S-550i Manual de usuario
Krell Industries
Krell Industries KRS-2 Manual de usuario
Krell Industries
Krell Industries 200c Manual de usuario
Krell Industries
Krell Industries Three-Channel Power Amplifier KAV-250a/3 Manual de usuario
Krell Industries
Krell Industries Preamplifier KBL Manual de usuario
Krell Industries
Krell Industries 700cx Manual de usuario
Krell Industries
Krell Industries Evolution Guía de inicio rápido
Krell Industries
Krell Industries KSA-50s Guía de inicio rápido
