Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER Guía de inicio rápido

OWNER’S REFERENCE

EVOLUTION

EVOLUTION TWO

MONAURAL PREAMPLIFIER

Evolution Two Monaural Preamplifier

Owner’s Reference, v05.0

Krell Industries, Inc.

45 Connair Road

Orange, CT 06477-3650 USA

TEL 203-799-9954

FAX 203-891-2028

E-MAIL Krell@krellonline.com

WEBSITE http://www.krellonline.com

This product complies with the EMC directive (89/336/EEC) and the low-voltage directive

(73/23/EEC).

WARNINGS

The Evolution Two preamplifier must be placed on a firm, level surface where it is not exposed to

dripping or splashing.

The ventilation grids on the top of the Evolution Two preamplifier and the space underneath the

Evolution Two preamplifier must be unobstructed at all times during operation. Do not place flam-

mable material above or beneath the preamplifier.

Before making connections to the Evolution Two preamplifier, ensure that the power is off and other

components are in mute or stand-by mode. Make sure all cable terminations are of the highest quali-

ty, free from frayed ends, short circuits, or cold solder joints.

Do not connect an RS-232 cable to the phono power port. Output from the phono power port can

seriously damage your computer. Do not connect the cable from a Krell KPE phono stage to the

RS-232 port.

THERE ARE NO USER SERVICEABLE PARTS INSIDE AN EVOLUTION TWO MONAURAL

PREAMPLIFIER.

Please contact Krell if you have questions not addressed in this guide.

This product is manufactured in the United States of America. Krell®is a registered trademark of Krell Industries, Inc., and is restricted for use

by Krell Industries, Inc., its subsidiaries, and authorized agents. Evolution Bias™ is a trademark of Krell Industries, Inc. and is a Krell technology

based on U.S. Patent No. 5,331,291. CAN Link™, CAST™, Evolution CAST™, and Krell Current Mode™ are trademarks of Krell Industries,

Inc. All other trademarks are registered to their respective companies.

iii

Contents

List of Illustrations, page iv

A Letter from Dan D’Agostino, page 1

SECTION ONE: About Krell, page 3

The Krell Legacy, Revolutionary Krell CAST Technology,

Ensuring Maximum Performance, Definition of Terms

SECTION TWO: Unpacking and Placement, page 11

Opening the Evolution Two Shipping Carton

SECTION THREE: Quick Start, page 13

Connecting the Evolution to Your System,

Operating the Evolution Two

SECTION FOUR: Anatomy of an Evolution Two, page 15

Front Panel Description, Remote Control Description,

and Back Panel Description

SECTION FIVE: Connecting the Evolution Two to Your System, page 26

Input and Output Connections, Connection Steps,

Connections Using CAN Link

SECTION SIX: Evolution Two Operation, page 29

On/Off and Stand-by Operation, Play and Record,

Operation Using CAN Link

SECTION SEVEN: Customizing the Evolution Two, page 32

Navigation Conventions, Menu Functions

SECTION EIGHT: Questions and Answers, page 49

Troubleshooting System Noise

APPENDIX: CAN Link and Multiple Evolution Two Preamplifiers, page 51

WARRANTY, page 53

RETURN AUTHORIZATION PROCEDURE, page 55

SPECIFICATIONS, page 56

List of Illustrations

Figure 1, page 15

Evolution Two Preamplifier Chassis and

Power Supply Chassis Front Panels

Inset Evolution Two Preamplifier Channel: Front Panel View

Figure 2, page 16

Evolution Two Remote Control

Figure 3, page 22

Evolution Two Preamplifier Chassis and

Power Supply Chassis Back Panels

A Letter from Dan D’Agostino

Dear Audio Enthusiast,

Thank you for your purchase of the Evolution Two preamplifier.

My new Evolution products represent a watershed in my design philosophy and in

my quest for audio components that deliver absolute truth in music reproduction.

The expanse of the Evolution Two monaural design has allowed me to explore

fully the advantages of current mode topologies. The resulting circuit utilizes no

feedback and has a bandwidth of 2 MHz.

I have always been fascinated by the artistry inherent in great musical performanc-

es, and my new Evolution Two preamplifier delivers the these performances in

their entirety, unaltered, to the amplifier. At the same time, the Evolution Two pre-

amplifier provides the flexibility and control necessary for the listener to thoroughly

enjoy a high performance audio system. It is my pleasure to make the Evolution

products available to you.

The preamplifier plays a vital role in audio playback. At no other point in the repro-

duction process is the music so vulnerable to change. The signal level at the pre-

amplifier stage is small, and is particularly susceptible to noise and distortion. In

order to solve this problem, the Evolution Two employs Krell Current Mode gain

stages from input to output, and Current Audio Signal Transmission (CAST)

receivers and transmitters. Unprecedented in Krell design history, these unique

topologies combine in the Evolution Two preamplifier to form a circuit that has no

audible sonic signature.

The Evolution Series represents a new direction for Krell, where breakthrough cir-

cuit topologies also represent the vanguard in convenience and control. Sophisti-

cated communication circuitry allows from two to eight preamplifiers to be linked

to a single master from which all user interface is accomplished. The Evolution

Two Monaural Preamplifier is designed to complement perfectly the Evolution One

Monaural Power Amplifier. Combine the Evolution One and Two with my new

LAT-1000 loudspeakers, and experience the extraordinary capabilities of an

Evolution System.

1continued

I have some exciting news for you. Work on a new source component for the

Evolution Series is ongoing as of this writing. Possessed of the unique Evolution

technologies that power the amplifier and preamplifier, this Evolution source will

expose the real advantages of the latest recording formats while taking compact

disc playback to the next level. I encourage you to audition it as soon as it is

released.

Sincerely,

Daniel D’Agostino

Chief Executive Officer

(A Letter from Dan D’Agostino continued)

About Krell

This section describes the Krell Legacy, the innovative features and technology of

the Evolution Two, and defines CAST and other key terms used in this reference.

The Krell Legacy

“I design every Krell component to set the standard

for workmanship, style, and performance.”

Dan D’Agostino

High-end audio is a demanding pursuit—an ongoing quest for excellence in music

reproduction that drives equipment manufacturers to strive for the absolute in

design and performance. With a keen understanding of this passionate drive, Krell

Industries, Inc., was founded in 1980.

Over the past 2-1/2 decades, Krell has earned a distinguished reputation for engi-

neering innovation and product excellence. The company’s history is replete with

product introductions that have deeply impacted the high-end audio industry. The

most discriminating audiophiles and product reviewers have consistently recog-

nized Krell components for standard-setting performance.

From the company’s inception to the present, Krell C.E.O. Dan D’Agostino has

continually “pushed the envelope” of performance in audio. His exploration of new

technologies, driven by his never-ending quest to elevate the standard of excel-

lence, has resulted in breakthrough audio designs. Evolution Two preamplifiers

build on this Krell legacy.

Dan D’Agostino remains committed to the development of new designs and tech-

nologies. And the Krell legacy will continue to evolve with products that deliver

innovative engineering, perfection in build quality, and outstanding audio perform-

ance.

SECTION ONE

continued

Revolutionary Krell CAST Technology

Current Audio Signal Transmission, termed CAST, is a revolutionary method of

connecting analog audio components for unparalleled sonic performance.

Innovative engineering combines the new Krell CAST circuitry with existing Krell

Current Mode technology to create entire CAST systems that reproduce music

with incredible range, tonality, and precision.

The Voltage Signal Transmission

and the Traditional Audio System

Traditionally, signal is transmitted in the voltage domain between two components.

In an audio system, each component is a discrete entity with unique characteris-

tics that act upon the musical signal independently. Each component is unaware

of the other components in the system. The cables that connect the components

also have their own electrical characteristics, which affect the sonic presentation

of the entire system. CAST transmission unifies individual components and inter-

connects into an electrically linked whole. The original signal remains unaltered

from source to speaker.

CAST Basics

Here is how a CAST audio system works. Internally, each CAST source transfers,

or amplifies, current using Krell Current Mode circuitry. This current signal is then

output using CAST circuitry. When the signal is received by a CAST input, Krell

Current Mode circuitry again takes over until the signal reaches the loudspeaker.

By maintaining the musical signal in the current domain from beginning to end, an

entire CAST system behaves as if it is one component. With CAST, circuit board

properties and signal transmission aberrations between components are eliminat-

ed. Cable impedances and their effects on the transmitted signal are non-existent.

How CAST and Krell Current Mode Interact

While CAST is a new method of transferring the musical signal between compo-

nents, its origin stems from Krell Current Mode, the technology developed to

transfer the musical signal within a component. CAST combined with Krell Current

Mode takes circuitry signal transmission to the next evolutionary level. In essence,

Krell Current Mode maintains the integrity of the signal within the component and

(SECTION ONE: About Krell continued)

CAST preserves the transmitted signal between components. Together, CAST and

Krell Current Mode technologies unify separate Krell components into a single

global circuit. Krell Current Mode technology enjoys bandwidth increases up to an

order of magnitude greater than their voltage based counterparts. This dramatic

increase in circuit bandwidth delivers near perfection in the audible band that typi-

cally suffers from phase distortions in voltage circuits.

CAST Cable Construction

A CAST system uses cables manufactured by Krell and other manufacturers spe-

cially licensed by Krell. Thin and flexible CAST cables are constructed with the

same build quality as other Krell components and are aesthetically matched to the

components that Krell manufactures. An all-metal body and locking connectors

with gold contacts are part of the standard no-compromise specification devel-

oped for every CAST cable made.

Evolution CAST

By employing radical current mirror circuitry, the Evolution components elevate the

CAST technology to another level. This advanced use of the technology increases

the linearity, transient speed, and bandwidth of the Evolution components while

reducing the distortion by an order of magnitude.

The Best Musical Performance

When you operate a CAST system, you will hear significant improvements in every

performance area: speed, precision, dynamic range, depth and width of the sound

stage, transient impact, tonal balance, harmonic distortion, and more. The goal for

CAST is the same company goal used for all Krell products. Krell strives for the

delivery of the best performance of a musical event for you, using the full expres-

sion of technology to date.

continued

Ensuring Maximum Performance

“My pursuit of excellence in sound reproduction and

my love of great musical performance fuels the ongoing

Evolution design effort at Krell.”

Dan D’Agostino

The product of breakthrough Krell technology, the Evolution Two Monaural

Preamplifier works in tandem with the Evolution One Monaural Power Amplifier to

provide a sound that is supremely dynamic and musical. Indeed, it is the sound of

the music itself.

Core Technologies

Zero Feedback Balanced Current Mode Design

The signal path is fully complementary and fully balanced from input to output. All

transistors operate in Class A mode. CAST inputs drive a newly designed current-

mode balanced input stage, which uses a unique topology able to reject com-

mon-mode input noise over an unusually wide bandwidth.

Single-ended and balanced inputs drive a dynamically-cascoded JFET buffer,

which has tremendous open-loop linearity and very high input impedance, to elim-

inate loading effects. The voltage signals are then converted into balanced current

signals, the form in which they remain through the remainder of the signal path.

The audio signal remains in the current domain throughout the entire preamplifier.

Only at the single-ended and voltage outputs is it converted back to the voltage

domain.

All signal gain is realized in the current domain using proprietary multiple-output

current mirrors with nearly 500 times the open loop linearity of other designs.

Negative feedback is not used anywhere in the Evolution Two preamplifier, nor is it

necessary. Open-loop distortion is typically less than 0.005% (50 parts per mil-

lion), and the open loop bandwidth extends to two megahertz. The result is an

extraordinarily wide and deep image, with an open, effortless sound.

The signal switching relays are hermetically sealed and use gold-plated bifurcated

contacts for maximum signal integrity. Where needed multiple relays are connect-

ed in a “T” configuration to virtually eliminate crosstalk from unselected inputs.

The volume setting can be adjusted and displayed either numerically, from 0 to

151, or in dB, from –inf to +12.0 dB.

(SECTION ONE: About Krell continued)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Amplificador de Krell Industries

Krell Industries

Krell Industries Evolution 202 Manual de usuario

Krell Industries

Krell Industries S-1500 Manual de usuario

Krell Industries

Krell Industries KRS-2 Manual de usuario

Krell Industries

Krell Industries PAM-3 Manual de usuario

Krell Industries

Krell Industries Evolution 202 Guía de inicio rápido

Krell Industries

Krell Industries Home Theater Standard 7.1 Manual de usuario

Krell Industries

Krell Industries S-1000 Manual de usuario

Krell Industries

Krell Industries S-1500 Manual de usuario

Krell Industries

Krell Industries 302e Manual de usuario

Krell Industries

Krell Industries Preamplifier KRS-IA Manual de usuario

Krell Industries

Krell Industries S-1200 Guía de inicio rápido

Krell Industries

Krell Industries Evolution 600 Manual de usuario

Krell Industries

Krell Industries PAM-7 Manual de usuario

Krell Industries

Krell Industries kSL-2 Guía de inicio rápido

Krell Industries

Krell Industries Preamplifier KRC 2 Guía de inicio rápido

Krell Industries

Krell Industries KAV 3250 Guía de inicio rápido

Krell Industries

Krell Industries K-300p Guía de inicio rápido

Krell Industries

Krell Industries KSA-i400 Guía de inicio rápido

Krell Industries

Krell Industries Evolution Guía de inicio rápido

Krell Industries

Krell Industries FBI Guía de inicio rápido

Krell Industries

Krell Industries 700cx Manual de usuario

Krell Industries

Krell Industries Showcase DVD Manual de usuario

Krell Industries

Krell Industries KAV-280p Manual de usuario

Krell Industries

Krell Industries KSA-100S Guía de inicio rápido

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario