Kramer VS-21H-IR Manual de usuario

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VS-21H-IR

2x1 HDMI Switcher

P/N: 2900-000671 Rev 6

VS-21H-IR – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the VS-21H-IR 2x1 HDMI Switcher 5

4Connecting the VS-21H-IR 6

4.1 Using the Remote Control Transmitter 7

5Operating the VS-21H-IR 2x1 HDMI Switcher 8

5.1 Working in the PC Mode 8

5.2 Working in the DVD Mode 9

5.3 VS-21H-IR Factory Reset Procedure 10

6Technical Specifications 11

Figures

Figure 1: VS-21H-IR 2x1 HDMI Switcher 5

Figure 2: Connecting the VS-21H-IR 2x1 HDMI Switcher 6

VS-21H-IR - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 14 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:

Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and

GROUP 14: Collaboration.

Congratulations on purchasing your Kramer VS-21H-IR 2x1 HDMI Switcher, which

is ideal for the following typical applications:

Home theater, presentation and multimedia applications

Rental and staging

VS-21H-IR - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VS-21H-IR away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

VS-21H-IR - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

VS-21H-IR - Overview

3 Overview

The VS-21H-IR is a high-quality switcher for HDMI signals that accepts two HDMI

inputs—letting you select either HDMI input using a switch located on the panel—

and routes the selected HDMI input signal to the HDMI output.

In particular, the VS-21H-IR features:

Maximum data rate of 6.75Gbps (2.25Gbps bandwidth per graphic channel)

HDTV compatibility

HDCP compliance

Kramer Equalization & re-Klocking™ Technology that rebuilds the digital

signal to travel longer distances

HDMI support for Lip Sync, HDMI Uncompressed Audio Channels, Dolby

TrueHD, DTS−HD, CEC

EDID PassThru that passes EDID/HDCP signals from source to display

Active input & output LED indicators.

12V DC power

Front panel and IR remote control capability

VS-21H-IR - Overview

3.1 Defining the VS-21H-IR 2x1 HDMI Switcher

This section defines the VS-21H-IR.

Figure 1: VS-21H-IR 2x1 HDMI Switcher

Feature

Function

INPUT 1 HDMI Connector

Connects to the HDMI source 1

INPUT 2 HDMI Connector

Connects to the HDMI source 2

OUTPUT HDMI Connector

Connects to the HDMI acceptor

12V DC

+12V DC connector for powering the unit

IN 1 LED

Lights when source 1 is selected

Flashes when selected but no input is connected

IN 2 LED

Lights when source 2 is selected (flashes when

selected but no input is connected)

OUT LED

Lights when the output is connected

ON LED

Lights when receiving power

SELECT Button

Toggles between IN 1 and IN 2

IN 1 LED lights when INPUT 1 is selected, or the IN 2

LED lights when IN 2 is selected

IR Receiver Window

Receives signals from the infrared remote control

transmitter

IR LED

The red LED lights when receiving signals from the

Infrared remote control transmitter

VS-21H-IR - Connecting the VS-21H-IR

4 Connecting the VS-21H-IR

Always switch off the power to each device before connecting it to your

VS-21H-IR. After connecting your VS-21H-IR, connect its power and

then switch on the power to each device.

To connect the VS-21H-IR as illustrated in the example in Figure 2:

1. Connect up to two HDMI sources to the INPUT connectors, using the Kramer

HDMI cables: INPUT 1 connector to HDMI source 1 (for example, DVD Player

1) and INPUT 2 connector to HDMI source 2 (for example, DVD Player 2).

2. Connect the OUTPUT connector to the HDMI acceptor (for example, a

plasma display), using the Kramer HDMI cable.

3. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity.

4. Press the SELECT button (or press key 1 or 2 on the remote transmitter,

once setup (see Section 4.1)) to choose which HDMI input to route to the

output. The SELECT button toggles between INPUT 1 and INPUT 2, lighting

the IN 1 LED when INPUT 1 is selected, or the IN 2 LED when IN 2 is

selected.

Figure 2: Connecting the VS-21H-IR 2x1 HDMI Switcher

VS-21H-IR - Connecting the VS-21H-IR

4.1 Using the Remote Control Transmitter

You can use the remote control transmitter to switch INPUT 1 or 2 to the output.

Before doing so, set it to work with the VS-21H-IR by assigning a GROUP number.

The setup parameters for the remote control transmitter are as follows: router number = 1

(default); group number = 11, single digit mode (default), video (default). For further details,

see the RC-IR3 user manual

To assign the GROUP number on the remote control transmitter, do the following:

1. Point the remote control transmitter at the remote receiver (item 10 in Figure

1) and press the GROUP key.

2. Press key 11.

This sets and saves the group number.

To switch INPUT 1 or 2 to the output via the remote control transmitter, press key

1 or 2.

Otros manuales para VS-21H-IR

Tabla de contenidos

Otros manuales de Cambiar de Kramer

Kramer

Kramer VS-211HDx1 Manual de usuario

Kramer

Kramer VP-311DVI Manual de usuario

Kramer

Kramer vs-162 Manual de usuario

Kramer

Kramer ASPEN-1616UX Manual de usuario

Kramer

Kramer VS-21H-IR Manual de usuario

Kramer

Kramer VS-34FD Manual de usuario

Kramer

Kramer VP-61N Manual de usuario

Kramer

Kramer VS-211H2 Manual de usuario

Kramer

Kramer VP-61N Manual de usuario

Kramer

Kramer VS-81DVI-R Manual de usuario

Kramer

Kramer VP-440H2 Manual de usuario

Kramer

Kramer ASPEN-32UFX Manual de usuario

Kramer

Kramer VS-41HDCP Manual de usuario

Kramer

Kramer VS-41HDCP Manual de usuario

Kramer

Kramer VP-436 Manual de usuario

Kramer

Kramer PL-15 Manual de usuario

Kramer

Kramer VS-21HDCP-IR Manual de usuario

Kramer

Kramer TOOLS VP-211K Manual de usuario

Kramer

Kramer VM-218DTxr Manual de usuario

Kramer

Kramer VM-218DTxr Manual de usuario

Kramer

Kramer VP-311DVI Manual de usuario

Kramer

Kramer VP-440 Manual de usuario

Kramer

Kramer VS-421 Manual de usuario

Kramer

Kramer VM-22H Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario