Kramer BC/VS-2216 Manual de usuario

BC/VS-2216

INSTRUCTION MANUAL

BC/VS-2216: 16x16 Programmable Stereo Audio Matrix Switcher

The BC-2216 Programmable Stereo Audio Matrix Switcher is the top of the line of Kramer’s audio

switchers. The BC-2216 serves as a 16x16 Stereo Audio switcher, for any studio application. The

machine may be operated as a stand-alone matrix or work in conjunction with the KRAMER BC-

2516 Video Switcher.

The BC-2216 unit has an LCD readout and a key-pad controlled operation. The unit has a bright

LED readout showing the switchers status and a microprocessor built-in with an EEPROM for

storing and retrieving settings.

Operation:

Connect all sources and acceptors to the rear panel of the BC-2216 machine, as

explained in the following diagrams.

Interconnect, if necessary, the BC-2216 unit to either the BC-2516 or the BC-2616

machines using a flat cable with DB9 male-to-male connectors on each side.

Connect a cable between the DB9 socket of the BC-2216 unit to the serial port of the

PC for RS-232 control

Install the accompanying software on your hard disk, following the instructions in

the distribution diskette.

Operate the sources, acceptors as well as the BC-2216 unit.

The keypad operation is interactive. In order to perform a function, the required

function switch (CON, SYS, STO, or RCL) should be pressed. The LCD back-light

will turn on, and a dialogue between the user and machine is initiated.

CONnect - to connect an input to a selected output.

SYStem - This function selects whether the user wishes to work in audio breakaway

or not, i.e., should the audio switching be done separately from the video switching,

or should it follow the video switching. This function is also used for setting the

baud rate for the RS-232 communication port. When using this SYStem function,

please note that if you do not want to change a parameter, simply pressing ENT (i.e.

ENTER) will leave the previously set parameter in effect.

STOre - to save the present setup of the machine in memory. Up to 15 setups may

be saved.

RCL - the recall key is used to recall a setup saved in memory. The recalled setup

will blink on the LED displays, and user confirmation is required if the setup is to be

implemented.

PROGRAM display:

When using the keypad to control the machine, the LCD display becomes a user-friendly interface

between the user and the machine - prompting for user input, warning before data may be erased,

informing of setup parameters, etc.

STATUS display:

This 7-segment LED display shows the audio connections of the machine. The first digit is the input

which is connected to output 1, the second is the input which is connected to output 2, etc. When

recalling a saved setup, that setup will flash on the STATUS display. A flashing display does not

indicate the present status of the machine, it displays the status which will be set up if the user

confirms implementation.

The RS232 Interface:

The BC-2216 may be also controlled with the serial RS-232 interface. The switcher is supplied with

a program which, using this port, allows control and monitoring of the unit/s via a PC.

Technical Specifications:

INPUTS: 16 Stereo Audio, looping, 50K input impedance on terminal blocks.

OUTPUTS: 16 Stereo Audio, 50 Ohms on terminal blocks.

AUDIO BANDWIDTH: Exceeding 40 KHz.

CROSSTALK: Less than 70dB (1KHz).

THD: Less than 0.1%

COUPLING: AC.

MAXIMAL SIGNAL LEVEL: 12Vpp.

AUDIO S/N: Better than 85 dB (+4dBm).

CONTROL: Microprocessor and EEPROM.

INTERFACE: RS-232.

STORAGE CAPACITY: 15 presets.

DIMENSIONS: 19 inch, 2U, rack mountable.

POWER SOURCE: 230 VAC (115VAC, U.S.A.).

WEIGHT: 3.7 Kg.

Please note that if the output signal is disturbed or interrupted by very strong external electromagnetic interference, it

should return and stabilize when such interference ends. If not, turn the power switch off and on again to reset the

machine. The socket-outlet shall be installed near the equipment and shall be easily accessible. To fully disconnect

equipment, remove power cord from its socket.

Tabla de contenidos

Otros manuales de Conmutador de matriz de Kramer

Kramer

Kramer VS-44HDCP Manual de usuario

Kramer

Kramer 88DS Manual de usuario

Kramer

Kramer Sierra Video 4848V5xl Manual de usuario

Kramer

Kramer XL 1204V2 Manual de usuario

Kramer

Kramer Sierra Video 84V3 Manual de usuario

Kramer

Kramer Sierra Pro XL 1616V5S Manual de usuario

Kramer

Kramer VS-88HN Manual de usuario

Kramer

Kramer VP-88ETH Manual de usuario

Kramer

Kramer Sierra Video 3264V5Sxl Manual de usuario

Kramer

Kramer 3232DEE Manual de usuario

Kramer

Kramer VS-84HDCPxl Manual de usuario

Kramer

Kramer 88V3 Manual de usuario

Kramer

Kramer VS-402XL Manual de usuario

Kramer

Kramer XL 1204V4S Manual de usuario

Kramer

Kramer XL 1204V Manual de usuario

Kramer

Kramer VS-6464DN-EM Manual de usuario

Kramer

Kramer VS-2042 Manual de usuario

Kramer

Kramer VS-42HN Manual de usuario

Kramer

Kramer XL 1608V4S Manual de usuario

Kramer

Kramer VS-48HN Manual de usuario

Kramer

Kramer VS-88H2A Manual de usuario

Kramer

Kramer VS-6EII Manual de usuario

Kramer

Kramer 3232S Manual de usuario

Kramer

Kramer VS-84HDCPxl Manual de usuario

Manuales populares de Conmutador de matriz de otras marcas

Broadcast Tools

Broadcast Tools SS 8.2 Manual de usuario

Altimium

Altimium MATF32 Manual de usuario

ALFAtron

ALFAtron ALF-MUK44N Manual de usuario

Monoprice

Monoprice Blackbird 15377 Manual de usuario

PTN

PTN FMX12 Manual de usuario

CYP

CYP nT15GX01 Manual de usuario

TESmart

TESmart HMA0402A40 Manual de usuario

Octava

Octava HD4XSTPMX Manual de usuario

Intelix

Intelix FLX-88 Instrucciones de funcionamiento

Roland

Roland XS-1HD Manual de usuario

Atlona

Atlona AT-HDMI-22M Manual de usuario

Link

Link HD8X8 Manual de usuario

AMX

AMX AVS-OP-2020-117 Instrucciones y recetas

Lindy

Lindy 38042 Manual de usuario

Extron electronics

Extron electronics MTPX Plus Series Manual de usuario

Key Digital

Key Digital Champion KD-16x16CS Manual de usuario

Shinybow USA

Shinybow USA SB-8811 Manual de usuario

Optimus

Optimus Compact Manual de usuario