Klein Tools ET180 Manual de usuario

INSTRUCTIONMANUAL

Digital

Differential Manometer

ENGLISH

ET180

Differential Manometer

• P1, P2, AND

DIFFERENTIAL

PRESSURE

• +/- 60 inH2O RANGE AND

+/-1.5% FS ACCURACY

• UNITS INCLUDE:

bar, oz/in2, psi, mbar,

kPa, inHg, mmHg,

kg/cm2,inH2O, ftH20,

and cmH2O

• MAGNET ON BACK

FOR HANDS-FREE

OPERATION

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

GENERAL SPECIFICATIONS

Klein Tools ET180 is designed to measure the pressure for ports P1, P2,

and the differential pressure individually for air and gas pressures. The

meter features a magnet in back for hands-free operation.

• Environment: Indoors

• Sensor Type: Gauge manometer/dual sensors with temperature

compensation

• Range: +/- 60 inH2O

• Accuracy: +/- 1.5% FS at 25°C

• Measurement units: bar, oz/in2, psi, mbar, kPa, inHg, mmHg,

kg/cm2,inH2O, ftH20, and cmH2O

• Auto Power Off (APO): After 15 minutes of inactivity

• Tubing: 1/8" ID × 6.56' (3mm ID × 2m) silicon tubing included

• Batteries: 3× AAA alkaline

• Operating Altitude: 6562 ft. (2000 m)

• Relative Humidity: <85% non-condensing

• Operating Temp: 32°to 122°F (0°to 50°C)

• Storage Temp: 14°to 140°F (-10°to 60°C)

• Dimensions: 6.19" × 2.47" × 1.38" (157 × 63 × 35 mm)

• Weight: 7.2 oz. (202 g) including batteries

• Standards: Conforms to EN 61326-1:2013; EN61326-2-3:2013

Specifications subject to change.

WARNINGS

To ensure safe operation and service of the tester, follow these

instructions. Failure to observe these warnings can result in severe

injury or death. Know the characteristics of the gas you are working

with and use proper precautions to avoid hazardous conditions.

• Read, understand, and follow all instructions to ensure safe operation.

• The meter is NOT insulated. Avoid contact with areas where energized

conductive elements may be present. Shut off power to the area before

starting measurements.

• Always wear approved eye protection.

ENGLISH

SYMBOLS ON METER

Warning or Caution Magnet Location

Wear Approved

Eye Protection

Conformité Européenne:

Conforms with European

Economic Area directives

NOT insulated - Will NOT

protect against electric shock UKCA - UK Conformity

Assessment

Strong Magnetic Field WEEE – Electronics disposal

Read Instructions Battery Type and Orentation

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FGD

FEATURE DETAILS

NOTE: There are no user-serviceable parts inside tester.

1. LCD Screen 4.UNITS button

A. Measurement 5.Power button

B. P1, P2, DIFF indicator 6.HOLD button

C. Units of Measure 7.MAX/MIN button

D. Low battery indicator 8.Backlight button

E. Hold, Max, Min and Avg icons 9.ZERO button

F. Auto Power Off (APO) icon 10.Magnetic holder

G. Zero icon 11.Battery door

2. P1/P2 ports 12.Battery door screw

3. P1/P2 button

Back of TesterFront of Tester

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

FUNCTION BUTTONS

POWER BUTTON

Press and hold for two seconds to turn the meter on/off.

NOTE: To

conserve battery life, the meter will automatically power off after 15

minutes of inactivity.

Auto-Power Off (APO) Function

While unit is powered on, press and hold the Zero button

for two seconds to turn on/off the APO function.

NOTE: APO on

is default setting

P1/P2 BUTTON

Repeated presses will toggle between P1, P2, and differential (P1-P2)

measurements.

NOTE: P1 is the meter default.

UNITS BUTTON

Repeated presses will toggle between

bar, oz/in

, psi, mbar, kPa, inHg,

mmHg,kg/cm

inH

O, ftH

0, and cmH

options.

HOLD BUTTON

Press to lock the current reading on the display. Reading will remain on

the display until pressed again, or until the meter automatically powers off.

MAX/MIN BUTTON

Press to toggle between the Maximum, Minimum, and Average values.

Press and hold for two seconds to exit selected mode.

BACKLIGHT BUTTON

Press to power backlight on/off.

ZERO BUTTON

Press to automatically zero the meter before starting measurements.

OPERATING INSTRUCTIONS

1. Press the Power button

for 2 seconds to power on the meter.

NOTE: The Auto-power off will automatically turn off the meter

after 15 minutes of non-user activity to conserve battery life.

2. Press the Zero button

before taking pressure readings, it will

zero both P1 and P2 ports.

3. Connect a single hose to measure pressure relative to ambient

pressure or attach both hoses for differential pressure (P1-P2).

4. Press the P1/P2 button

to toggle between the P1, P2, or

Differential Pressure measurement on the display.

5. Press the Unit button

to change to desired unit.

NOTE: "OL" is displayed on the LCD if the pressure is outside the

measurement range.

NOTE: "ERR" is displayed on the LCD if the sensor has been

damaged. The unit will no longer operate to measure pressure. NO

USER-SERVICEABLE PARTS INSIDE METER. DO NOT ATTEMPT TO

REPAIR. Discontinue use and contact Klein Tools Customer Service.

NOTE: To ensure highest accuracy it is recommended to use the

meter at ambient temperature.

ENGLISH

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

OPERATING INSTRUCTIONS

PRESSURE MEASUREMENT ACCURACY

UNIT OF

MEASURE ABBREVIATION

ON LCD RANGE RESOLUTION ACCURACY

Bar

bar ±0.150  0.001

+/-1.5%

Full Scale

Ounces per

square inch

ozin2 ±34.80  0.01

Pounds per

square inch

psi ±2.175 0.001

Millibar

mbar ±150.0 0.1

Kilopascal

kPa ±15.00 0.01

Inch of

mercury

inHg ±4.429 0.001

Millimeter

of mercury

mmHg ±112.5  0.1

Kilogram

per square

centimeter

kgcm2 ±0.152 0.001

Inch of

water

inH20 ±60.32 0.01

Foot of

water

ftH20 ±5.026 0.001

Centimeter

of Water

cmH20 ±152.9 0.1

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

ENGLISH

CLEANING

Be sure tester is turned off and wipe with a clean, dry lint-free

cloth.

Do not use abrasive cleaners or solvents.

STORAGE

Remove the batteries when the tester is not in use for a prolonged

period of time. Do not expose to high temperatures or humidity.

After a period of storage in extreme conditions exceeding the limits

mentioned in the General Specifications section, allow the tester to

return to normal operating conditions before using.

DISPOSAL /RECYCLE

Do not place equipment and its accessories in the trash.

Items must be properly disposed of in accordance with local

regulations. Please see www.epa.gov or www.erecycle.org

for additional information.

BATTERY REPLACEMENT

When the Low Battery Indicator

is blinking

, the batteries must be

replaced.

1. Loosen screw

and remove battery door

2. Remove and recycle 3 spent AAA batteries.

3. Install 3 new AAA batteries, noting proper polarity.

4. Replace battery door and tighten screw securely.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Otros manuales para ET180

Tabla de contenidos

Otros manuales de Instrumento de medición de Klein Tools

Klein Tools

Klein Tools CL440 Manual de usuario

Klein Tools

Klein Tools CL600 Manual de usuario

Klein Tools

Klein Tools 93LDM100C Manual de usuario

Klein Tools

Klein Tools MM6000 Manual de usuario

Klein Tools

Klein Tools CL120 Manual de usuario

Klein Tools

Klein Tools ET100 Manual de usuario

Klein Tools

Klein Tools CL390 Manual de usuario

Klein Tools

Klein Tools CL200 Manual de usuario

Klein Tools

Klein Tools Probe-Pro Manual de usuario

Klein Tools

Klein Tools CL3000 Manual de usuario

Klein Tools

Klein Tools MM1300 Manual de usuario

Klein Tools

Klein Tools Toner-Pro VDV500-123 Manual de usuario

Klein Tools

Klein Tools CL320 Manual de usuario

Klein Tools

Klein Tools CL700 Manual de usuario

Klein Tools

Klein Tools CL360 Manual de usuario

Klein Tools

Klein Tools CL150 Manual de usuario

Klein Tools

Klein Tools ET110 Manual de usuario

Klein Tools

Klein Tools CL800 Manual de usuario

Klein Tools

Klein Tools CL445 Manual de usuario

Klein Tools

Klein Tools IR3000 Manual de usuario

Klein Tools

Klein Tools VDV500-051 Manual de usuario

Klein Tools

Klein Tools CL2000 Manual de usuario

Klein Tools

Klein Tools CL380 Manual de usuario

Klein Tools

Klein Tools CL800A Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario