Kilotech KPS 60 SS Manual de uso y cuidado

www.kilotech.com

KPS 60 SS AND 150 SS OPERATIONAL MANUAL E MAN05312022

KPS 60 SS & KPS 150 SS

851290 & 851291

MAN05312022

Operations and Calibration Manual

Contents subject to change without notice

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 2 OF 8

Introduction

Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your

scale. Should you require Technical Support, please contact your local dealer from whom you have purchased.

Avoid lengthy exposure to heat or cold Allow the scale to acclimate to normal room temperature

before use

Allow sucient warm up me Turn the scale on and wait for a few minutes to allow the

internal components a chance to stabilize before weighing

Do not leave a load or weight on a scale for a prolonged

period of me

Might damage load cell

Do not tamper with the scale yourself This will void the warranty. Contact your local distributor or

Kilotech directly to properly repair your scale

Do not overload beyond the maximum weight limit

Do not pull the plug by its cord when unplugging

Do not use the scale near re or corrosive gas

Unless the scale is waterproof do not spill water or immerse

in water

Avoid placing the scale near a heater It could cause a uctuaon to the indicator reading

Always make sure to use a Kilotech approved adapter

Do not drop the scale or apply a sudden shock

Do not drag the scale

Avoid exposing to other electromagnec devices These devices emit RF and can cause unstable readings. If

your scale should perform poorly, try moving the scale to a

dierent room or locaon

Level the scale or make sure it is on an even surface A scale used on an uneven surface may provide an unstable

reading

Scale should be used within stated temperature

& humidity limits

General Precautions

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 3 OF 8

Product Number 851290 AND 851291

Capacity & Graduaon

Weighing Modes kg / lb / oz.

Display 1” LCD with Backlight. 4.5” x 1.5”.

Auto Power O Yes programmable.

Power

Product Dimensions

Plaer Size 14" x 16" x 2.5" stainless steel

Connectivity RS232 for labels

Specifications

Adapter (included) or batteries (not included).

851290 60 kg x 20 g / 130 lb x 0.05 lb / 2116 oz. x 1 oz.

851291 150 kg x 50 g / 330 lb x 0.1 lb / 5290 oz. x 2 oz.

16” x 14” x 2.5” for the base and 10.5” x 3.5” x 1.5” for

the indicator

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 4 OF 8

OFF ON/OFF:

•Power switch is on the left side of the indicator .

ZERO ZERO (TARE):

• Press this key to return scale to zero or to tare the weight on the plaer (subtract the weight of the empty

container for example).

UNIT

UNIT:

•Press this key to toggle between weighing modes available : kg and lbs.

TARE FUNCTION

1. Put an empty container on the plaer.

2. Press ZERO. The display will show “O”.

3. Put items to be weighed in the container. Only the weight of the items will be displayed.

4. To cancel the TARE funcon, empty the plaer and press TARE. The scale will return to ··o··_

5. NOTE: TARE works by subtraction 100% from full capacity.

UNIT

TARE

HOLD

Press this key to store weight value.

•

Auto-off function setting

Make sure the scale is off.

Press and hold the ZERO key (Do not release) and turn the scale on The display will show SET (Do not release ZERO

key)

While keeping the ZERO key down, press the TARE key three times The display will show A.OFF (You can now

release the ZERO key) Press the UNITS key to enter the auto off adjustment mode

Press TARE to scroll through the Auto off time adjustments

Once the desired time is found press the ZERO key to confirm You can now turn the scale off and the auto off time

will be set.

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 5 OF 8

CALIBRATION

1. You need a test weight to perform this calibration.

Press and hold down the ZERO key and Tare key and then switch the power to ON which is on the left side of

the indicator, the display will show CAL then the A/D value.

Press TARE key. The display will show the calibration weight which you set.

4.Place the calibration weight on the scale’s platter.

5.Press the TARE key.

6.The display will show several dashes (- - - - -) and then the A/D value.

7.Remove the weight.

8.The calibration is now complete.

9.Troubleshoong (if calibraon is ineecve):

a. Try a more stable surface

b. Move to an interference free locaon

c. Replace baeries

If you are encountering problems calibrating your scale, please contact your dealer for further assistance. This is

necessary because the weight of a mass in one location is not necessarily the same in another location. Also, with time

and use, mechanical deviations may occur.

NOTE: Calibration has been done in factory already. Do not recalibrate it unless it is extremely inaccurate. If you have

any problems about calibration, please contact with the dealer who will provide you professional guidance.

FUNCTION SETTING

1．A-OFF：Time for auto-off (120s / 180s / 300s / OFF)

2．bL： Backlight (On/Auto/OFF/STB)

3. Units : Weighing units ( kg / lb/oz）

4．Por.u: Power on units ( kg / lb/oz/kg.lb.oz）

5．G.sw : Gravity (On/OFF)

6．Bmi.sw: Body mass index mode(On/OFF)

7．bAud : Baut rate (1200 / 2400/4800 /9600)

8．PAr: Parity bit(none/odd/EwEn)

9．Mod : Transmission mode(kEy/Stb/coN/OFF)

10. Ani,sw：Animal mode(On/OFF)

11. FiLd.L: Filter level(STr/WEEK/nor)

12. LocK.r：Locking range (10/30/50/OFF )

13. Pzr： Zero range when power on(3/4/10/20 )

14. Kzr：Key zero range(3/4/5/10 )

This scale requires 50% of the capacity in Test weights. Please make sure you have them PRIOR to performing the calibration.

RS232 TRANSMIT FUNCTION

1. RS232 interface：DB9

SCALE PC

RXD 2 2 RXD

TXD 3 3 TXD

GND 5 5 GND

2. RS232 Transmission Agreement：

Mode：SimplexAsynchronous Serial

Baud rate：9600

Data Bit：8

Parity Bit：NONE

Stop Bit：1

Data Format：ASCII

3. Transmission Information Format：20 Byte ，blank=20H

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

W/M

CR LF

M= overload mode

W= normal weighing mode

= weight information

Exampla:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

CR LF

5 0 k g

Weight information Unit formation

50kg

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 6 OF 8

TABLE1

1. CAPU, full capacity unit kg or lb.

2. CAP, full capacity.

3. CALU=, calibration unit kg or lb.

4. CAL, calibration weight.

5. DIVS, division.

6. ADC, ADC conversion number selection (18~20).

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 7 OF 8

TABLE2

KPS 60 SS AND KPS 150 SS OPERATIONS MANUAL E MAN05312022

PAGE 8 OF 8

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de Kilotech

Kilotech

Kilotech Integrator LE.3k Manual de usuario

Kilotech

Kilotech KPC 5000 Manual de usuario

Kilotech

Kilotech KPS 60 Manual de usuario

Kilotech

Kilotech KPC 5000 Manual de instrucciones

Kilotech

Kilotech KSB series Manual de usuario

Kilotech

Kilotech KWS 301 Manual de usuario

Kilotech

Kilotech KPC 1000SS Manual de uso y cuidado

Kilotech

Kilotech KPC 1500 SS Manual de usuario

Kilotech

Kilotech KPS MS Manual de usuario

Kilotech

Kilotech KPC 1500SS Manual de uso y cuidado

Kilotech

Kilotech Integrator LE.3k Manual de usuario

Kilotech

Kilotech KPC-2000 Manual de usuario

Kilotech

Kilotech KPC 1000SS Manual de usuario

Kilotech

Kilotech Abacus AB30 Manual de usuario

Kilotech

Kilotech CTR Series Manual de usuario

Kilotech

Kilotech KWS-SW series Manual de usuario

Kilotech

Kilotech KIN 500 Manual de usuario

Kilotech

Kilotech KRS 3000 Manual de usuario

Kilotech

Kilotech KPC 2000-03A Manual de instrucciones

Kilotech

Kilotech Integrator LE.3k Manual de usuario

Kilotech

Kilotech KWD 750SS Manual de usuario

Kilotech

Kilotech KWD 15K Manual de usuario

Kilotech

Kilotech S-2000 Manual de usuario

Kilotech

Kilotech KRS SWP Series Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario