Kilotech KPS MS Manual de usuario

KPS MS AND KPS 2 MAN03312021

Operator Manual

This manual applies to KPS MS and KPS 2. The above picture is the KPS 2.

Contents subject to change without notice

Version V2

KPS MS AND KPS 2 OPERATIONS MANUAL E MAN03312021

K851244 - KPS 68 MS SCALE GTIN 888960512449

K851245 - KPS 180 MS SCALE

GTIN 888960512456

K851246 - KPS 30-2 PARCEL SCALE

68kgx0.05kg/150lbx0.1lb

180kgx0.1kg/400lbx0.1lb

30kgx0.01kg/66lbx0.02lb/1056ozx0.5oz

GTIN 888960512463

K851247 - KPS 60-2 PARCEL SCALE

GTIN 888960512470

K851248 - KPS 150-2 PARCEL SCALE

60kgx0.02kg/132lbx0.05lb/2112ozx1oz

150kgx0.05kg/330lbx0.1lb/5280ozx2oz

GTIN 888960512487

Ce manuel est disponible en français à www.kilotech.com

KPS MS and KPS 2

KPS MS AND KPS 2 MAN03312021

TABLE OF CONTENTS

Introduction

General Precautions

Specifications

Outline

Unpacking and setup

Contents

Parts description, Power supply

Battery power, Keypad display, Status indicators

Weighing operations

Key functions

Maintenance

Troubleshooting

Service information

Error and status message

Warranty

TABLE OF CONTENTS

Introduction

Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your

scale. Should you require support, please contact your local dealer from whom you have purchased. Happy

Weighing!

General Precautions

Avoid lengthy exposure to heat or

cold.

Allow the scale to acclimate to normal room temperature

before use.

Allow sufficient warm up time. Turn the scale on and wait for a few minutes to allow the

internal components a chance to stabilize before weighing.

Do not leave a load or weight on a

scale for a prolonged period of

time.

Do not tamper with the scale

yourself.

This will void the warranty. Contact your local distributor to

properly repair your scale.

Do not disassemble the scale yourself. This will void the warranty. Contact your local distributor to

properly repair your scale.

Do not load beyond max cap the

maximum weight limit.

Do not pull the plug by its cord

when unplugging.

Do not use the scale near fire or

corrosive gas.

Do not spill water or immerse in

water.

Avoid placing the scale near a

heater.

It could cause a fluctuation to the indicator reading.

Always make sure to use a Kilotech

approved adapter.

Do not drop the scale or apply a

sudden shock.

Do not drag the scale.

Avoid exposing to other

electromagnetic devices.

These devices emit RF and can cause unstable readings. If

your scale should perform poorly, try moving the scale to a

different room or location.

Level the scale or make sure it is on

an even surface.

A scale used on an uneven surface may provide an unstable

reading.

Scale should be used within stated

temperature & humidity limits.

Always disconnect the device from

the power supply.

Disconnect before installing, servicing, cleaning or

performing maintenance.

Check the power cable regularly for

damage.

If it is damaged, immediately disconnect the device from the

power supply.

KPS MS AND KPS 2 MAN03312021 1

Specifications

Product Number

K851244 K851245 K851246

K851247 K851248

Product Name

KPS 68 MS V2 KPS 180 MS KPS 30-2 KPS 60-2 KPS 150-2

Capacity

68 KG / 150 LB 180 KG / 400 LB 30 KG / 66 LB / 1056 oz 60 KG / 132 LB / 2112 oz 150 KG / 330 LB / 5280 oz

Graduation

0.05 KG / 0.1 LB 0.1 KG / 0.1 LB 0.01 KG / 0.02 LB / 0.5 oz 0.02 KG / 0.05 LB / 1 oz 0.05 KG / 0.1 LB / 2 oz

Weighing Modes

Display

kg / lb (and oz available on the KPS 2)

1” LCD with Backlight

Back Light yes

Auto Power Off yes

Power

100 V - 240 V DC 15V AC adapter

4-AA batteries

Battery

4-AA batteries

Product Dimensions 37 x 36 x 15.5 cm / 53.5 x 40 x 11 cm /

each / carton cm 70 x 38.5 x 39 cm 55 x 51 x 44 cm

Product Dimensions 14.57 x 14.17 x 6.10 in / 21.06 x 15.75 x 4.33 in /

each / carton inches 27.56 x 15.16 x 15.35 in 21.65 x 20.08 x 17.32 in

Weight each kg / lb.

5 kg / 11.02 lb.

5.2 kg / 11.46 lb.

Weight carton kg / lb.

22.5 kg / 49.60 lb.

23.5 kg / 51.8 lb.

Dimensional Weight

each

kg / lb.

4.5 kg / 10 lb. 5 kg / 11 lb.

Dimensional Weight

carton kg / lb.

21 kg / 47 lb. 25 kg / 55 lb.

Platter Size 315 x 305 x 55 mm / 12.4 x 12 x 2.17 inches

Operating Temperature 5°C to 35° C / 41°F to 95°F 15% - 85% RH

/ Humidity

Key Functions 4 keys

ON/OFF TARE UNIT

HOLD

Application Mode Weighing, Hold, Tare

Outline

KPS MS AND KPS 2 MAN03312021 2

KPS MS AND KPS 2 MAN03312021

Unpacking and setup

•Remove the scale from the box and place it on a firm, level surface.

•Avoid locations with rapid temperature changes, excessive dust, moisture, air currents, vibrations,

electromagnetic fields, heat or direct sunlight.

•Adjust the leveling feet until the bubble is centered in the circle of the level indicator (if applicable).

•NOTE: Ensure that the scale is level each time its location is changed.

•Connect the supplied AC adapter to the power input receptacle on the side of the indicator. Plug the AC

adapter into a power outlet.

•If the scale will be stored or transported in the future, save the packaging material to ensure the best

possible protection for the scale.

Contents

1. Scale

2. AC Power Adaptor

3. User’s Manual

Parts Description:

Fixed Mild Steel Checkered Platform

LCD Display Key Pad

KPS MS AND KPS 2 MAN03312021

Power Supply :

Connect the AC Adaptor to the AC main supply. Connect the plug to the AC jack on the bottom of the scale as

shown in the illustration below. The power outlet should be close to the scale and easily accessible.

Battery Power :

The scale will automatically switch to battery operation if there is a power failure or the power cord is removed to

provide uninterrupted scale operation.

Note: When low battery is displayed, the scale will shut off after 30 seconds.

CAUTION:

Risk of explosion can occur if replaced with the wrong type or connected improperly.

Do not use the battery for any purpose other than those described in this manual.

Do not disassemble, repair or otherwise manipulate the battery.

Obey the local laws and regulations of disposing the battery.

Operation :

Keypad and Display Description :

Status Indicators :

ICON Description

Stability display

→0←

Zero setting activated

Negative sign

NET

Display net weight

Hold Display hold function

kg / lb Currently chosen weight unit

KPS MS AND KPS 2 MAN03312021

Weighing operations

Key functions

Power on/off

•Turns the display ON or OFF

Tare

•Weight tare: Place the receptacle (box, bowl etc…) on the scale, and when the reading is stable,

press tare key to tare the weight.

•To clear Tare, press their respective buttons.

Units key

•Use the key to shift between “kg”, “lb” and "oz" (oz is available on the KPS 2).

Hold key

•Use the key when the applied load is not a static load.

•Press the HOLD key and it will capture the reading once a stable reading occurs.

Turning Scale On/Off :

To turn the scale on, press the [ON / OFF] button scale will display and then enters the active weighing

mode.

To turn the scale off, press the [ON / OFF] button to turn it off.

Zero Operation :

When the display shows "0", the scale is ready to weigh. If the weight of the object exceeds the capacity of the

scale by more than 5%, the display shows "0000".

Objects can be added to the pan until the overload threshold is reached. The display shows the total weight of

all objects on the pan.

Changing Units of Measure :

In the weighing mode, use [UNIT] to display the next available measuring unit. Repeat process to scroll through all

units.

KPS MS AND KPS 2 MAN03312021

Performing TARE function:

Place an empty container on the scale and press [TARE]. The display will show a net value of “0”.

To clear the Tare value, press [TARE] with an empty platter.

Performing HOLD feature :

Press [HOLD] and a triangle will appear above NET triangle. Load the object on to the platform. Once the weight is

stable, the scale locks the weight automatically, even if you remove the object from the platter.

Press [HOLD] again to release HOLD feature.

Maintenance:

Cleaning :

Before cleaning, disconnect the power plug from the power outlet and remove the batteries from the appliance

to power off the unit.

•Clean with a damp cloth and a mild soap or similar agents if necessary, and buff it dry.

•Do not use any acids, alkalis or strong active solvents to clean the housing or the control panels.

Troubleshooting:

SYMPTOM

POSSIBLE CAUSE

REMEDY

Scale does not turn on

Battery discharged

Replace the battery or use the

adapter

Power cord not plugged in

properly

Check the power cord

connection and make sure it is

plugged in properly into the

power outlet.

Other failure

Have the scale serviced by a

Kilotech authorized service

center.

Poor accuracy

Unstable environment

Move the scale to a suitable

location. Refer to the manual

Specifications

Improper calibration

Perform calibration.

Service Information :

If the troubleshooting section above does not resolve or describe your issue, contact your authorized distributor.

KPS MS AND KPS 2 MAN03312021

Error and Status Message:

Error Message:

ERROR MESSAGE

DESCRIPTION

REMEDY

Low battery indication

Connect the power supply or

change to new batteries.

Zero value is too high or too

low when the power is on

Empty the load plate before

powering up and check if the

scale is placed correctly.

Recalibrate the scale.

Zero value is too high when

the power is on

Empty the load plate before

powering up.

Recalibrate the scale.

AD board is malfunctioning

Check to see if the wire is

disconnected or change the

AD board.

AD board is malfunctioning

when entering the calibration

mode

Change the AD board.

Warranty :

Kilotech scales are warranted against defects in material and workmanship for a period of one(1) year for the

scale and 3 months for the adapter, from the date of purchase. Please retain your receipt as proof of

purchase. Warranty expiration on products returned without proof of purchase will be determined from the

manufacturing date code or the date of shipment to the authorized dealer. Coverage may be invalidated as

this date is previous to purchase date. No other express or implied warranty is given by Kilotech.

Freight damage on returns is not covered under warranty.

This warranty does not apply for the following reasons: the product has been damaged by accident or misuse,

parts and products of a consumable nature, exposed to radioactive or corrosive materials, has foreign material

penetrating to the inside of the product, or as a result of service or modification by other than Kilotech.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Escala de Kilotech

Kilotech

Kilotech KPS 60 SS Manual de uso y cuidado

Kilotech

Kilotech Integrator LE.3k Manual de usuario

Kilotech

Kilotech KPC 2000 Manual de usuario

Kilotech

Kilotech KPC 1000SS Manual de usuario

Kilotech

Kilotech KRS 3000 Manual de usuario

Kilotech

Kilotech KWD 750SS Manual de usuario

Kilotech

Kilotech 851340 Manual de usuario

Kilotech

Kilotech KPC 2000-03A Manual de instrucciones

Kilotech

Kilotech KPC-2000 Manual de usuario

Kilotech

Kilotech KHS 200-30 Manual de usuario

Kilotech

Kilotech KLE 200 Manual de usuario

Kilotech

Kilotech MS-4202L Adult Manual de usuario

Kilotech

Kilotech KWS 301 Manual de usuario

Kilotech

Kilotech KWS-SW series Manual de usuario

Kilotech

Kilotech KPC 160 Manual de usuario

Kilotech

Kilotech KPC 1000SS Manual de uso y cuidado

Kilotech

Kilotech KPC 5000 Manual de instrucciones

Kilotech

Kilotech KRS SWP Series Manual de usuario

Kilotech

Kilotech KSB series Manual de usuario

Kilotech

Kilotech KHA Series Manual de usuario

Kilotech

Kilotech KPC 1500 SS Manual de usuario

Kilotech

Kilotech CTR Series Manual de usuario

Kilotech

Kilotech KPOS 1530 Manual de usuario

Kilotech

Kilotech KWS 301 Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario