Kichler Lighting Select Sutter Place Manual de usuario

INSTRUCTION MANUAL

Product images may vary slightly from actual product.

Sutter Place™ Select

KICHLER.COM

TABLE OF CONTENTS

SAFETY RULES .................................................................4

TOOLS AND MATERIALS REQUIRED.......................5

PACKAGE CONTENTS ....................................................5

MOUNTING OPTIONS.....................................................6

HANGING THE FAN.......................................................... 7

INSTALLATION OF SAFETY SUPPORT....................9

ELECTRICAL CONNECTIONS ...................................10

FINISHING THE INSTALLATION.................................11

ATTACHING THE FAN BLADES.................................12

INSTALLING THE MOUNTING PLATE....................12

INSTALLING THE LIGHT FIXTURE........................... 13

INSTALLING THE LAMPS & GLASS SHADE .......14

OPERATING INSTRUCTIONS..................................... 15

TROUBLESHOOTING....................................................16

SPECIFICATIONS............................................................. 17

FCC WARNING.................................................................. 17

Sutter Place™Select |

SAFETY RULES

1. To reduce the risk of electric shock, ensure electricity has been

turned o at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical

Code and local electrical codes. Electrical installation should

be performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of fire, electric shock, or

personal injury, use mounting screws provided with the

outlet box. Most outlet boxes commonly used for the

support of light fixtures are not acceptable for fan support

and may need to be replaced. Due to the complexity of

the installation of this fan, a qualified licensed electrician is

strongly recommended.

4. The outlet box and support structure must be securely

mounted and capable of reliably supporting a minimum of

50 pounds. Use only CUL Listed outlet boxes marked “FOR

FAN SUPPORT”.

5. The fan must be mounted with a minimum of 7 feet

clearance from the trailing edge of the blades to the floor.

6. Do ot operate reversing switch while fan blades are in

motion. Fan must be turned o and blades stopped before

reversing blade direction.

7. Avoid placing objects in the path of the blades.

8. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

9. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be suitable

for most cleaning.

10. After making the electrical connections, spliced conductors

should be turned upward and pushed carefully up into outlet box.

The wires should be spread apart with the ground wire and white

(common) wire to one side with the black (load) wire to the other

side of the outlet box.

11. Electrical diagrams are reference only. Light kits that are not

packed with the fan must be CUL Listed and marked suitable for

use with the model fan you are installing. Switches must be CUL

General Use Switches. Refer to the Instructions packaged with the

light kits and switches for proper assembly.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PERSONAL INJURY, MOUNT FAN TO OUTLET BOX

MARKED “ACCEPTABLE FOR FAN SUPPORT”. WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND

THE BLADE BRACKETS (ALSO REFERRED TO AS FLANGES)

DURING ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT

OBJECTS IN THE PATH OF THE BLADES.

SPECIAL NOTICE

This appliance is equipped with a “Wattage Limiting Device”

required by the United States Department of Energy. The device

has been installed at the factory and can not be removed.

Installing Lamps in excess of 75 total watts will disable the unit’s

light fixture. If this should happen, you will need to reset the

lighting fixture by turning the power o to the ceiling fan and/

or light fixture, reinstalling lamps totaling less that 75 watts

and then turning the power back on.

4 | KICHLER.COM

TOOLS AND MATERIALS REQUIRED

PACKAGE CONTENTS

•

Phillips screwdriver

•

Blade screwdriver

•

11 mm wrench

•

Step ladder

•

Wire cutters

Unpack your fan and check the contents . You should have the following items:

A. Fan blades (5)

B. Ceiling mounting bracket

C. Canopy

D. Ball/downrod assembly

E. Coupling cover

F. Fan motor assembly

G. Set of 5 blade brackets and Pre-Installed

mounting screws

H. Mounting plate

I. Switch housing

J. Light kit

K. Glass shade

L. 3, 4 Watt E-12, LED lamps

M. Part bag contents

1) Mounting hardware :

wood screws (2), flat washers (2),

star washers (2), wire nuts (3),

screws (2)

2) Rubber gasket

3) Blade attachment hardware:

screws (17), fiber washers (17)

4) Safety cable hardware:

wood screw, lock washer, flat washer

5) Pull chains and fobs (2)

6) Balance kit

Sutter Place™Select |

MOUNTING OPTIONS

If there isn’t an existing UL (cUL for Canadian Installation) listed

mounting box, then read the following instructions. Disconnect the

power by removing fuses or turning o circuit breakers.

Secure the outlet box directly to the building structure. Use

appropriate fasteners and building materials. The outlet box and its

support must be able to fully support the moving weight of the fan

(at least 50 lbs). Do not use plastic outlet boxes.

Figures 1, 2 and 3 are examples of dierent ways to mount the

outlet box.

NOTE: If you are installing the ceiling fan on a sloped (vaulted)

ceiling, you may need a longer downrod to maintain proper

clearance between the tip of the blade and the ceiling. A minimum

clearance of 12” is suggested for optimal operation.

NOTE: Depending on the location you have selected for

installation, you may need to purchase and install a “Joist Hanger”

for the support of the outlet box. Make sure the joist hanger you

purchase has been designed for use with ceiling fans. (Fig. 4)

Outlet Box

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Outlet Box

Angled Ceiling

Maximum 20° Angle

Recessed

Outlet Box

Ceiling

Mounting

Plate

Outlet Box

Provide Strong

Support

6 | KICHLER.COM

HANGING THE FAN

NOTE: This ceiling fan is supplied with two types of hanging assemblies; a downrod

and canopy mounting system and a “close to ceiling” Canopy ONLY system. The

“close-to- ceiling” installation is recommended in rooms with less than 8-foot

ceilings or in areas where additional space is desired from the floor to the fan

blades. Once you have selected which mounting system you will use, proceed with

the following instructions. Where necessary, each section of the instructions will

note the dierent procedures to follow for the two types of mounting.

REMEMBER to turn o the power before you begin.

To properly install your ceiling fan, follow the steps below.

Step 1. Remove the decorative canopy bottom cover from the canopy. (Fig. 5)

Step 2. Loosen the four screws on the top of the canopy. Remove the two non-

slotted screws and loosen the slotted screws. This will enable you to remove the

ceiling mounting bracket. (Fig. 5)

Step 3. Remove the ceiling mounting bracket from the canopy by loosening the

two screws on the bottom of the ceiling mounting bracket. Turn the canopy

counterclockwise and remove. (Fig. 5)

Step 4. Pass the 120 volt supply wires from the ceiling outlet box through the

center of the ceiling mounting bracket. (Fig. 6)

Step 5. Attach the ceiling mounting bracket to the outlet box using the screws and

washers included with the outlet box. (Fig. 6)

STANDARD CEILING INSTALLATION

Step 1. Remove the hanger ball from the downrod assembly by loosening the set

screw, removing the cross pin and sliding the ball o the rod. (Fig.7)

Step 2. Loosen the two set screws and remove the hitch pin and retaining clip from

the coupling on top of the motor assembly. (Fig. 7)

Screws

Canopy

Canopy Cover

CUL Listed

Outlet Box

Ceiling Mounting Bracket

Ceiling

Mounting

Bracket Hook

120V Wires

Set Screw

Set Screws

Retaining Pin

Hitch Pin

Set Screws

Canopy

Screws

Washers

Cross Pin

Hanger Ball

Downrod

Coupling Cover

Coupling

Supply Wires

Mounting Screws

(supplied with electrical box)

Fig. 5

Fig. 6

Fig. 7

Sutter Place™Select |

STANDARD CEILING INSTALLATION

Step 3. Carefully feed the electrical lead wires from the fan up through the downrod.

Thread the downrod into the coupling until the Hitch pin holes are aligned.

Next, replace the hitch pin and retaining clip. Tighten both set screws. (Fig. 7)

Step 4. Slip the coupling cover, canopy cover, decorative mounting screw cover and canopy

onto the downrod.

Thread the hanger ball onto the downrod, insert the cross pin through the downrod and

tighten. Now tighten the set screw. (Fig. 7)

Step 5. Lift the motor assembly into position and place the hanger ball into the ceiling

mounting bracket.

Rotate the entire assembly until the “Check Tab” has dropped into the “Registration Slot”

and seats firmly. (Fig. 8)

The entire motor assembly should not rotate (left or right) when seated properly.

WARNING: Failure to reattach the cross pin and seat the “Check Tab” can cause the fan to

fall from the ceiling during operation. Take special care to make sure this pin is reattached.

CLOSE-TO-CEILING INSTALLATION

Step 1. Remove three of the six screws and lock washers (every other one) from the collar

on top of the motor assembly. Place the ceiling fan canopy and the rubber gasket over the

collar and align the mounting holes with the holes in the collar. Attach the canopy with the

rubber gasket and the three screws and lock washers previously removed. (Fig. 9)

WARNING: Failure to completely tighten the three mounting screws in step 9 could result

in the fan possibly falling from the ceiling.

Step 2. Hang the fan on the ceiling mounting bracket by inserting the hook on the inside

edge of the ceiling mounting bracket through one of the screw holes in the ceiling canopy

(Fig. 10). This will allow you to have both hands free to make the wiring connections.

Registration Slot

Check Tab

Rubber Gasket

Coupling

Hook

Canopy

Screws and Lock Washers

(3 of 6 places)

Fig. 10

Fig. 9

Fig. 8

8 | KICHLER.COM

INSTALLATION OF SAFETY SUPPORT

(required for Canadian installation ONLY)

A safety support cable is provided to help prevent the ceiling fan from falling, please

install it as follows.

Step 1. Attach the provided wood screw and washers to the ceiling joist next to the

mounting bracket but do not tighten. (Fig. 11)

Step 2. Adjust the length of the safety cable to reach the screw and washers by pulling

the extra cable through the cable clamp until the overall length is correct, put the end of

the cable back through the cable clamp, forming a loop at the end of the cable. Tighten

the cable clamp securely. Now, put the loop in the end of the safety cable over the wood

screw and under the washer. Tighten the wood screw securely.

NOTE: Although the safety support cable is required for Canadian installations only. It’s

a good idea to make the attachment with any installation.

Ceiling Mounting

Bracket Attach safety

cable to ceiling

joist with screw

ad washer

Fig. 11

Sutter Place™Select |

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have turned o the power at

the main circuit panel.

Follow the steps below to connect the fan to your household wiring. Use the wire

connecting nuts suppled with your fan. Secure the connectors with electrical tape. Make

sure there are no loose wire strands or connections.

Step 1. Connect the fan supply (black) wire and light supply (blue) wire to the black

household supply wire as shown in Figure 12.

Step 2. Connect the neutral fan (white) wire to the neutral household (white) wire.

Step 3. Connect the fan ground wire (green) to the household ground wire.

Step 4. After connecting the wires, spread them apart so that the green and white wires

are on one side of the outlet box and the black and blue wires are on the other side.

Step 5. Turn the connecting nuts upward and push the wiring into the outlet box.

BLK

BLUE

BLK

GRN

Power Lines 120v

Green Ground

Wiring Box

Ground to

Mounting

Bracket or

Downrod

Fig. 12

10 | KICHLER.COM

Otros manuales para Select Sutter Place

Tabla de contenidos

Idiomas:

Otros manuales de Admirador de Kichler Lighting

Kichler Lighting

Kichler Lighting Hatteras Bay Patio Manual de usuario

Kichler Lighting

Kichler Lighting Pacific Edge 300157 Manual de usuario

Kichler Lighting

Kichler Lighting BASICS PRO SELECT 330017MWH Manual de usuario

Kichler Lighting

Kichler Lighting 300260/60-GENT Series Manual de usuario

Kichler Lighting

Kichler Lighting 300026 Manual de usuario

Kichler Lighting

Kichler Lighting 52" Basics Pro Manual de usuario

Kichler Lighting

Kichler Lighting Decor InnesII 300130 Manual de usuario

Kichler Lighting

Kichler Lighting 52" Chiara LED Manual de usuario

Kichler Lighting

Kichler Lighting Harbour Walk Patio Manual de usuario

Kichler Lighting

Kichler Lighting 35155 Manual de usuario

Kichler Lighting

Kichler Lighting Sunburst 300170 Manual de usuario

Kichler Lighting

Kichler Lighting Arkwet Patio Manual de usuario

Kichler Lighting

Kichler Lighting Arkwright Manual de usuario

Kichler Lighting

Kichler Lighting Maor 310136 Manual de usuario

Kichler Lighting

Kichler Lighting Bentzen Manual de usuario

Kichler Lighting

Kichler Lighting BASICS PRO PREMIER 330016WH Manual de usuario

Kichler Lighting

Kichler Lighting RIED Manual de usuario

Kichler Lighting

Kichler Lighting Seaside 310181WZC Manual de usuario

Kichler Lighting

Kichler Lighting Humble 300415 Manual de usuario

Kichler Lighting

Kichler Lighting Surrey Climates 60 Manual de usuario

Kichler Lighting

Kichler Lighting KLF-SOLA-34-WHT-BN Manual de usuario

Kichler Lighting

Kichler Lighting 300370 Manual de usuario

Kichler Lighting

Kichler Lighting 330013 Manual de usuario

Kichler Lighting

Kichler Lighting Lacey Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje