Kichler Lighting Incus Manual de usuario

56” Incus™ LED FAN

INSTRUCTION MANUAL

Product images may vary slightly from actual product.

TABLE OF CONTENTS

SAFETY RULES.......................................................................... 4

TOOLS REQUIRED....................................................................

PACKAGE CONTENTS.............................................................

MOUNTING OPTIONS.............................................................

HANGING THE FAN..................................................................

INSTALLATION OF SAFETY SUPPORT..........................

ELECTRICAL CONNECTIONS.............................................

FINISHING THE INSTALLATION........................................

INSTALLINGTHELEDASSEMBLY............................................. 16

INSTALLING THE WALL TRANSMITTER........................

OPERATION INSTRUCTION .............................................

TROUBLESHOOTING.............................................................

56” Incus™ LED FAN | 3

ATTACHING THE FAN BLADES ........................................ 7

INSTALLING THE BLADE ARM PLATE ......................... 8

4 | KICHLER.COM

SAFETY RULES

1. To reduce the risk of electric shock, insure electricity has been

2. All wiring must be in accordance with the National Electrical Code

and local electrical codes. Electrical installation should be

performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of fire, electric shock, or personal

injury, mount to outlet box marked "acceptable for fan support of

15.8 kg (35 lbs.) or less" and use mounting screws provided with

the outlet box. Most outlet boxes commonly used for the support

of light fixtures are not acceptable for fan support and may need

to be replaced. Due to the complexity of the installation of this fan,

a qualified licensed electrician is strongly recommended.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

OR PERSONAL INJURY, MOUNT FAN TO OUTLET BOX MARKED

"ACCEPTABLE FOR FAN SUPPORT".

4. The outlet box and support structure must be securely mounted

and capable of reliably supporting a minimum of 50 pounds. Use

only CUL Listed outlet boxes marked "FOR FAN SUPPORT".

5. The fan must be mounted with a minimum of 7 feet clearance

from the trailing edge of the blades to the floor.

6. To operate the reverse function on this fan, press the reverse

button while the fan is running.

7. Avoid placing objects in the path of the blades.

8. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

9. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be suitable

for most cleaning.

10. After marking electrical connections, spliced conductors should

be turned upward and pushed carefully up into outlet box. The

wires should be spread apart with the grounded conductor and

the equipment-grounding conductor on one side of the outlet

box.

11. Electrical diagrams are reference only. Light kits that are not

packed with the fan must be CUL Listed and marked suitable for

use with the model fan you are installing. Switches must be CUL

General Use Switches. Refer to the Instructions packaged with

the light kits and switches for proper assembly.

WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO

NOT BEND THE BLADE BRACKETS (ALSO REFERRED TO AS

FLANGES) DURING ASSEMBLY OR AFTER INSTALLATION. DO

NOT INSERT OBJECTS IN THE PATH OF THE BLADES.

TOOLS REQUIRED

Philips screw driver

Blade screw driver

11 mm wrench

Step ladder

Wire cutters

PACKAGE CONTENTS

Unpack your fan and check the

contents. You should have the

following items:

a. Fan blades (3)

b. Canopy & Ceiling mounting

bracket

Mounting hardware:

wood screws (2), flat washers (2),

star washers (2), wire nuts (3),

screws (2)

Blade attachment hardware:

Screw (9 + 2 spare)

Fiber washer ( 9 + 2 spare)

Blade arm plate hardware: Screw

(5 + 2 spare) i

c. Ball/downrod assembly

d. Coupling cover

e. Fan motor assembly

f. Blade arm plate

g. 17W LED assembly

h. Receiver

i. Wall Transmitter

j. Part bag contents

1 2 3 4 5

56” Incus™ LED FAN | 5

Safety cable hardware:

wood screw, spring washer,

flat washer

Balance Kit

6 | KICHLER.COM

If there isn't an existing UL (cUL for Canadian Installation) listed

mounting box, then read the following instructions. Disconnect the

Secure the outlet box directly to the building structure. Use

appropriate fasteners and building materials. The outlet box and its

support must be able to fully support the moving weight of the fan

(at least 50 lbs). Do not use plastic outlet boxes.

box.

NOTE: If you are installing the ceiling fan on a sloped (vaulted)

ceiling, you may need a longer downrod to maintain proper

clearance between the tip of the blade and the ceiling. A minimum

clearance of 12" is suggested for optimal operation.

NOTE: Depending on the location you have selected for installation,

you may need to purchase and install a "Joist Hanger" for the

support of the outlet box. Make sure the joist hanger you purchase

has been designed for use with ceiling fans. (Fig. 4)

MOUNTING OPTIONS

Fig. 1

Outlet box

Fig. 2

Provide strong

support

Recessed

outlet box Ceiling

mounting

plate

Fig. 3

ANGLED CEILING

MAXIMUM 30° ANGLE

Outlet box

Fig. 4

ATTACHING THE FAN BLADES

Step 1. Insert the blade through the slot on the blade arm plate .

(Fig.1) Secure the blade with three blade screws and fiber washer

provided.

Step 2. Repeat same process for the remaining blades.(Fig.2)

Fig. 1

fiber washer blade screw

56” Incus™ LED FAN | 7

Blades

Fig. 2

Blade arm plate slot

8 | KICHLER.COM

Fig. 4

Fig. 3

INSTALL THE BLADE ARM PLATE

Step 1. Align the 5 holes from the blade arm plate to the fan motor

assembly. Secure it with the 5 blade arm screws provided. (Fig.3) blade

blade arm plate

fan motor

assembly

blade arm plate screw

blade

blade arm plate

fan motor assembly

56” Incus™ LED FAN | 9

HANGING THE FAN

REMEMBER

To properly install your ceiling fan, follow the steps below.

Step 1. Remove the decorative canopy bottom cover from the canopy

by turning the cover counter clockwise. (Fig. 5)

Step 2. Remove the ceiling mounting bracket from the canopy by

removing (and save one of the two screws. Loosen the remaining screw

by a half turn. (Fig. 5)

Step 3. Pass the 120 volt supply wires from the ceiling outlet box

through the center of the ceiling mounting bracket. (Fig. 6)

Step 4. Attach the ceiling mounting bracket to the outlet box using the

screws and washers included with the outlet box. (Fig.6)

Fig. 6

Hanger bracket

Ceiling

canopy

Canopy

cover

Ceiling

hanger

bracket

Mounting screws (supplied

with electrical box)

UL Listed

electrial

box

120V Wires

Washers

Fig. 5

Step 5. Remove the hanger ball from the downrod assembly by

loosening the set screw, unscrewing and removing the cross

Step 6. Loosen the two set screws and remove the hitch pin and

retaining clip from the coupling on top of the motor assembly. (Fig. 7)

Step 7. Carefully feed the electrical lead wires from the fan up through

the downrod. Thread the downrod into the coupling until the Hitch pin

holes are aligned.

Next, replace the hitch pin and retaining clip. Tighten both set screws.

(Fig. 7)

HANGING THE FAN(continued)

Fig. 7

Downrod

Cross pin

Hanger

ball Set screw

Supply wires

Downrod

Hitch pin

Retaining clip Set screws

Set screws

10 | KICHLER.COM

(Fig. 7)

Tabla de contenidos

Idiomas:

Otros manuales de Admirador de Kichler Lighting

Kichler Lighting

Kichler Lighting Jade 300030 Manual de usuario

Kichler Lighting

Kichler Lighting Rivetta Manual de usuario

Kichler Lighting

Kichler Lighting FERRON Manual de usuario

Kichler Lighting

Kichler Lighting Decor InnesII 300130 Manual de usuario

Kichler Lighting

Kichler Lighting 52" Canfield Pro Manual de usuario

Kichler Lighting

Kichler Lighting 35156 Manual de usuario

Kichler Lighting

Kichler Lighting LYNDON Manual de usuario

Kichler Lighting

Kichler Lighting Celino Manual de usuario

Kichler Lighting

Kichler Lighting Terra Select Manual de usuario

Kichler Lighting

Kichler Lighting IMARI 300365SBK Manual de usuario

Kichler Lighting

Kichler Lighting 330163 Manual de usuario

Kichler Lighting

Kichler Lighting KAPONO Manual de usuario

Kichler Lighting

Kichler Lighting True Manual de usuario

Kichler Lighting

Kichler Lighting Deckard Manual de usuario

Kichler Lighting

Kichler Lighting Rana 310155 Manual de usuario

Kichler Lighting

Kichler Lighting Canfield Select Manual de usuario

Kichler Lighting

Kichler Lighting Universal 3 Light Fitter Manual de usuario

Kichler Lighting

Kichler Lighting KOSMUS Manual de usuario

Kichler Lighting

Kichler Lighting Canfield Manual de usuario

Kichler Lighting

Kichler Lighting 300370 Manual de usuario

Kichler Lighting

Kichler Lighting 52" RENEW DESIGNER Manual de usuario

Kichler Lighting

Kichler Lighting Bead Manual de usuario

Kichler Lighting

Kichler Lighting 300260/60-GENT Series Manual de usuario

Kichler Lighting

Kichler Lighting Bronson Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje