Keysight Technologies U2941A Manual de usuario

Keysight U2941A Parametric

Test Fixture

Operating

Guide

2 Keysight U2941A Operating Guide

Keysight U2941A Operating Guide 3

4 Keysight U2941A Operating Guide

Notices

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international

Manual Part Number

U2941-90001

Edition

Edition 6, July 1, 2017

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight

products may be downloaded from the

Web. Go to http://www.keysight.com/

go/conformity. You can then search by

product number to find the latest

Declaration of Conformity.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal

Acquisition Regulation (“FAR”) 2.101.

Pursuant to FAR 12.212 and 27.405-3

and Department of Defense FAR

Supplement (“DFARS”) 227.7202, the

U.S. government acquires commercial

computer software under the same

terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the

Software to U.S. government

customers under its standard

commercial license, which is embodied

in its End User License Agreement

(EULA), a copy of which can be found

at http://www.keysight.com/find/

sweula. The license set forth in the

EULA represents the exclusive authority

by which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license set

forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation that

is not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms,

rights, or licenses are explicitly required

from all providers of commercial

computer software pursuant to the FAR

and the DFARS and are set forth

specifically in writing elsewhere in the

EULA. Keysight shall be under no

obligation to update, revise or

otherwise modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS

227.7102, the U.S. government

acquires no greater than Limited Rights

as defined in FAR 27.401 or DFAR

227.7103-5 (c), as applicable in any

technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE

EDITIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL

WARRANTIES, EITHER EXPRESS OR

IMPLIED, WITH REGARD TO THIS

MANUAL AND ANY INFORMATION

CONTAINED HEREIN, INCLUDING BUT

NOT LIMITED TO THE IMPLIED

WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR

PURPOSE. KEYSIGHT SHALL NOT BE

LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY

INFORMATION CONTAINED HEREIN.

SHOULD KEYSIGHT AND THE USER

HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY TERMS

IN THE SEPARATE AGREEMENT SHALL

CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

Keysight U2941A Operating Guide 5

Safety Symbols

The following symbols on the instrument and in the documentation indicate

precautions which must be taken to maintain safe operation of the instrument.

Direct current (DC) Equipment protected throughout by

double insulation or reinforced insulation

Alternating current (AC) Off (supply)

Both direct and alternating current On (supply)

Three-phase alternating current Caution, risk of electric shock

Earth (ground) terminal

Caution, risk of danger (refer to this

manual for specific Warning or

Caution information)

Protective conductor terminal Caution, hot surface

Frame or chassis terminal Out position of a bi-stable push control

Equipotentiality In position of a bi-stable push control

6 Keysight U2941A Operating Guide

General Safety Information

WARNING

– Do not load the output terminals above the specified current limits.

– Do not use the device if it appears damaged or defective.

– Observe all markings on the device before establishing any connection.

– Do not operate the device in the presence of flammable gases or fumes.

– Do not install substitute parts or perform any unauthorized modification

to the device.

CAUTION

– Applying excessive voltage or overloading the device will cause

irreversible damage to the circuitry.

– Use the device with the cables provided.

– Repair or service that is not covered in this manual should only be

performed by qualified personnel.

Keysight U2941A Operating Guide 7

Environmental Conditions

This instrument is designed for indoor use and in an area with low condensation.

The table below shows the general environmental requirements for this

instrument.

Environmental conditions Requirements

Operating temperature 0 °C to 50 °C

Operating humidity 20% to 85% RH noncondensing

Storage temperature –20 °C to 70 °C

Storage humidity 5% to 90% RH noncondensing

8 Keysight U2941A Operating Guide

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard this

electrical or electronic product in domestic household waste.

Product category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Keysight Service Center,

or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml

for more information.

Sales and Technical Support

To contact Keysight for sales and technical support, refer to the support links on

the following Keysight websites:

–www.keysight.com/find/clampmeter

(product-specific information and support, software and

documentation updates)

–www.keysight.com/find/assist

(worldwide contact information for repair and service)

Keysight U2941A Operating Guide 9

Table of Contents

Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Product category: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Sales and Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Product at a Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Product outlook (with closed cover) . . . . . . . . . . . . . . . . . . . . . . . . .13

Product outlook (with opened cover) . . . . . . . . . . . . . . . . . . . . . . . .14

Product dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Standard Shipped Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Orderable Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Module options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Cable options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Connection Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Socket Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Attaching the socket module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Mounting and wiring the DUT on the socket module . . . . . . . . . . . .24

Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Installing the Parametric Measurement Manager . . . . . . . . . . . . . .29

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

10 Keysight U2941A Operating Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies N2142A Manual de usuario

Keysight Technologies

Keysight Technologies N5511A Manual de usuario

Keysight Technologies

Keysight Technologies U3042AM20 Manual

Keysight Technologies

Keysight Technologies N5990A-301 Manual de usuario

Keysight Technologies

Keysight Technologies E5092A Manual de usuario

Keysight Technologies

Keysight Technologies 16048G Manual de operación

Keysight Technologies

Keysight Technologies InfiniiVision 2000 X Series Manual de usuario

Keysight Technologies

Keysight Technologies E6640A Manual de usuario

Keysight Technologies

Keysight Technologies N8241 Manual de usuario

Keysight Technologies

Keysight Technologies E6640A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X-Series Manual de usuario

Keysight Technologies

Keysight Technologies N7700 Manual de usuario

Keysight Technologies

Keysight Technologies N4877A Manual de usuario

Keysight Technologies

Keysight Technologies i3070 Series 5i Manual de usuario

Keysight Technologies

Keysight Technologies 11644A Series Manual

Keysight Technologies

Keysight Technologies 85052B Manual

Keysight Technologies

Keysight Technologies 85053B Manual

Keysight Technologies

Keysight Technologies 16117B Manual de operación

Keysight Technologies

Keysight Technologies N5991 Manual de usuario

Keysight Technologies

Keysight Technologies N4000A SNS Series Manual de servicio

Keysight Technologies

Keysight Technologies S8780A Manual de usuario

Keysight Technologies

Keysight Technologies E7515B UXM 5G Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision M9241A Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario