Keysight Technologies 85059V Manual de servicio

Keysight Technologies

85059V

1.0 mm Precision

Verification Kit

Operating and

Service Manual

Notices

2003-2017

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

85059-90006

Edition

Edition 1, June 2017

Printed in USA/Malaysia

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined by

Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202, the

U.S. government acquires

commercial computer software

under the same terms by which the

software is customarily provided to

the public. Accordingly, Keysight

provides the Software to U.S.

government customers under its

standard commercial license, which

is embodied in its End User License

Agreement (EULA), a copy of which

can be found at

http://www.keysight.com/find/sweu

la. The license set forth in the EULA

represents the exclusive authority by

which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license

set forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation

that is not customarily provided to

the public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are

explicitly required from all providers

of commercial computer software

pursuant to the FAR and the DFARS

and are set forth specifically in

writing elsewhere in the EULA.

Keysight shall be under no obligation

to update, revise or otherwise modify

the Software. With respect to any

technical data as defined by FAR

2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight 85059B Operation and Service Guide 1

Contents

1. General Information

Chapter One at-a-Glance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Chapter One at-a-Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Verification Kit Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Calibration Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Installation of the Calibration Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Equipment Required but Not Supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Recording the Device Serial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Clarifying the Terminology of a Connector Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Regulatory and Environmental Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

2. Specifications

Information in This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Chapter Two at-a-Glance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Temperature—What To Watch Out For . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Mechanical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Pin Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Center Conductor Protrusion and Pin Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Supplemental Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

3. Use, Maintenance, and Care of the Devices

Information in this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Chapter Three at-a-Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Electrostatic Discharge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Visual Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Look for Obvious Defects and Damage First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

What Causes Connector Wear?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Connector Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Concentricity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Inspect the Mating Plane Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Inspect Female Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Supplies and Equipment Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

2 Keysight 85059B Operation and Service Guide

Contents

Cleaning Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Supplies and Equipment Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Basic Cleaning Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Making a Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-11

How to Make a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Preliminary Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Connector Misalignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

How to Separate a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Using a Torque Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14

Handling and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

4. Performance Verification

Information in This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1

Chapter Four at-a-Glance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

How Keysight Verifies the Devices in Your Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Recertification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

How Often to Recertify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Where to Send a Kit for Recertification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

5. Troubleshooting

Information in This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Chapter Five at-a-Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Troubleshooting Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Compatible Network Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Where to Look for More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Returning a Kit or Device to Keysight Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Contacting Keysight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Printing Copies of Documentation from the Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

6. Replaceable Parts

Information in This Chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

Chapter Six at-a-Glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Replacing the Verification Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Replaceable Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Keysight 1.0 mm Precision Verification Kit

85059V

Operation and Service Guide

1 General Information

Chapter One at-a-Glance

About this Manual

This manual describes the 85059V verification kit and provides replacement

part numbers, specifications, and procedures for using, maintaining and

troubleshooting this kit.

Chapter One at-a-Glance

Section Title Summary of Content

“Verification Kit Overview” on page 1-2 Describes the 85059V calibration kit contents, how to identify shorts,

and compatible network analyzers.

“Recording the Device Serial Numbers” on

page 1-4

Describes how to record your calibration kit’s serial numbers in a

table to avoid possible confusion with other calibration kits. Refer to

Table 1-1 on page 1-4.

“Clarifying the Terminology of a Connector

Interface” on page 1-5

How to identify your different device types.

“Preventive Maintenance” on page 1-5 How to avoid damaging the devices in your verification kit.

“Regulatory and Environmental

Information” on page 1-6

Description of regulatory symbols.

1-2 Keysight 85059V Operation and Service Guide

General Information

Verification Kit Overview

The Keysight 85059V 1.0 mm verification kit provides a set of standards with

known characteristics, traceable to primary standards in the Keysight

Technologies calibration lab. This set of standards is used to verify your

measurement calibration and also to verify that your PNA system is operating

within its specifications. The frequency range covered by the 85059V is from

10 MHz to 110 GHz.

Kit Contents

The 85059V verification kit includes the following items:

—Matchedthru

—Mismatchedthru

—Storagebox

— User’s and Service Guide (this manual)

— Form determining recalibration due date

— USB drive that contains factory-measured verification data for use with the

PNA system verification process

— Data sheet for each device that contains factory-measured verification data

— Anti-virus scan report

Refer to Chapter 6 for a complete list of replaceable part numbers.

Calibration Definitions

The 85059V verification kit is intended to be used with the 85059V 1.0 mm

calibration kits. Prior to performing a calibration with your PNA, the calibration

kit must be selected and the calibration definitions for the devices in the kit

installed in the PNA. Refer to your PNA Help system for instructions on

selecting the calibration kit and performing a calibration.

IMPORTANT! Backup copies of the data sheets, anti-virus scan reports,

and the data contained on the USB drive should be made immediately

upon receipt of the verification kit.

A file containing the verification data for your kit is maintained for 18

months from the time of measurement. If you lose this data, refer to

https://service.keysight.com/infoline/public/default.aspx or contact

Keysight. Refer to page 5-5.

Keysight 85059V Operation and Service Guide 1-3

General Information

Verification Kit Overview

Installation of the Calibration Definitions

The calibration definitions for the kit should be permanently installed in the

internal memory or hard disk of the PNA. They may already be resident within

the analyzer, or you can download them from Keysight’s Calibration Kit

Definitions Web page at

http://na.support.keysight.com/pna/caldefs/stddefs.html. In addition, the

calibration definitions may be entered manually from the front panel. Refer to

your PNA Help system for instructions.

Equipment Required but Not Supplied

Some items are required or recommended for successful operation of your kit,

but are not supplied with the kit. Refer to Table 6-2 for a list of these items and

for ordering information.

1-4 Keysight 85059V Operation and Service Guide

General Information

Recording the Device Serial Numbers

In addition to the kit serial number, the devices in this kit are individually

serialized. Figure 1-1 shows an example of the laser-engraved serial number

located on the nut of both beaded lines. The serial numbers of both

attenuators are printed on the labels, located on the bodies of the devices.

Record these serial numbers in Table 1-1. Recording the serial numbers will

prevent confusing the devices in this kit with similar devices from other kits.

Figure 1-1 Serial Number Engraved on the Nut of a Beaded Line

Table 1-1 Serial Number Record for the 85059V

Device Serial Number

Verification kit

Mismatch adapter

Match adapter

___________________________

Keysight 85059V Operation and Service Guide 1-5

General Information

Clarifying the Terminology of a Connector Interface

In this document and in the prompts of the PNA calibration wizard, the gender

of cable connectors and adapters is referred to in terms of the center

conductor. For example, a connector or device designated as 1.0 mm –f– has a

1.0 mm female center conductor.

A connector gage is referred to in terms of the connector that it measures. For

instance, a male connector gage has a female connector on the gage so that it

can measure male devices.

Preventive Maintenance

The best techniques for maintaining the integrity of the devices in this kit

include:

— routine visual inspection

—cleaning

— proper pin depth

— proper connection techniques

All of these are described in Chapter 3. Failure to detect and remove dirt or

metallic particles on a mating plane surface can degrade repeatability and

accuracy and can damage any connector mated to it. Improper connections,

resulting from pin depth values being out of specification (see Table 2-2 on

page 2-3), or from bad connection techniques, can also damage these devices.

1-6 Keysight 85059V Operation and Service Guide

General Information

Regulatory and Environmental Information

This section contains information that is required by various government

regulatory agencies.

The CE mark is a registered trademark of the European Community. (If accompanied by a year, it is

when the design was proven.)

ccr.keysight@key

sight.com

The Keysight email address is required by EU directives applicable to our product.

This symbol indicates separate collection for electrical and electronic equipment, mandated under EU

law as of August 13, 2005. All electrical and electronic equipment are required to be separated from

normal waste for disposal (Reference WEEE Directive, 2002/96/EC).

China RoHS regulations include requirements related to packaging, and require compliance to China

standard GB18455-2001.

This symbol indicates compliance with China RoHS regulations for paper/fiberboard packaging.

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies 85052B Manual

Keysight Technologies

Keysight Technologies N7015A Manual de usuario

Keysight Technologies

Keysight Technologies N5511A Manual de usuario

Keysight Technologies

Keysight Technologies U3042AE12 Manual

Keysight Technologies

Keysight Technologies 16380V Manual de operación

Keysight Technologies

Keysight Technologies N5990A Manual de usuario

Keysight Technologies

Keysight Technologies 85053B Manual

Keysight Technologies

Keysight Technologies 85041A Manual de servicio

Keysight Technologies

Keysight Technologies Infiniium MXR Series Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 4000 X Series Manual

Keysight Technologies

Keysight Technologies U3020AS16 Manual

Keysight Technologies

Keysight Technologies N9330B Manual de usuario

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manual de usuario

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manual de usuario

Keysight Technologies

Keysight Technologies 8494 Manual de servicio

Keysight Technologies

Keysight Technologies 11683AZ Option H01 Manual de servicio

Keysight Technologies

Keysight Technologies P9241A Guía del usuario

Keysight Technologies

Keysight Technologies U3020AD01 Manual

Keysight Technologies

Keysight Technologies InfiniiVision 3000G X Series Manual de usuario

Keysight Technologies

Keysight Technologies 16190B Manual de operación

Keysight Technologies

Keysight Technologies IOT8700 Series Manual de usuario

Keysight Technologies

Keysight Technologies X Series Manual de instalación y operación

Keysight Technologies

Keysight Technologies N108 A-Series Manual de usuario

Keysight Technologies

Keysight Technologies U1610/20A Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario