Keysight Technologies N5222-60124 Manual de instalación y operación

Installation Note

Keysight - Add 4-Port Capability

Upgrade Kit for

Version 6 Synthesizers

To Upgrade PNA N5221B and N5222B Option 605

Upgrade Kit Order Number: N5221BU- 605 and N5222BU- 605

Keysight Kit Number: N5222-60114

Notices

2000-2021

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

N5222-90114

Edition

Edition 1, October 2021

Printed in USA/Malaysia

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight Add 4-Port Capability Upgrade Kit

Upgrade Kit Number: N5222-60124

Installation Note

Description of the Upgrade

This upgrade converts your N5221B or N5222B Option 205 2-port analyzer to

a N5221B or N5222B Option 405 4-port analyzer by adding:

— an additional source

— an additional source synthesizer

—anadditionalmixerbrick

— two additional test port couplers

—asplitter

— a modified front panel

—anadditionalcableguard

— two additional LFE bias tee combiners

— PC assembly, low frequency extension (LFE) – 4-port

— new cables

After installation of this upgrade, your analyzer will be a N5221/2B 4-port

PNA.

Refer to “Overview of the Installation Procedure” on page 15.

This repair must be done at a service center or a self-maintainer service

center! Refer to “Getting Assistance from Keysight” on page 4.

4 Installation Note N5222-90114

Getting Assistance from Keysight

Installing this upgrade kit requires special skills and experience. If you think

you may not be qualified to do the work, or need advice, contact Keysight.

Contacting Keysight

Assistance with test and measurements needs and information on finding a

local Keysight office are available on the Web at:

http://www.keysight.com/find/assist

If you do not have access to the Internet, please contact your Keysight field

engineer.

If You Have Problems With the Upgrade Kit Contents

Keysight stands behind the quality of the upgrade kit contents. If you have

problems with any item in the kit, refer to www.keysight.com and the Contact

Keysight ()link.

In any correspondence or telephone conversation, refer to the Keysight

product by its model number and full serial number. With this information,

the Keysight representative can determine whether your product is still

within its warranty period.

Installation Note N5222-90114 5

Getting Prepared

To successfully install this upgrade kit, you will need the following:

—Alicensekey-referto“License Key Redemption” below.

— A PDF copy or a paper copy of the PNA Service Guide - refer to

“Downloading the Online PNA Service Guide” below.

— An ESD-safe work area - refer to “Protecting Your Workspace from

Electrostatic Discharge” below.

— Correct tools - refer to “Tools Required for the Installation” on page 9.

The PNA contains extremely sensitive components that can be ruined if

mishandled. Follow instructions carefully when making cable connections,

especially wire harness connections.

The person performing the work accepts responsibility for the full cost of

the repair or replacement of damaged components.

IMPORTANT! Before you begin this upgrade:

—Verify your instrument’s firmware is: A.13.55 or greater.

—Verify your instrument’s IF Multiplexer (IF MUX) board, has P4, P204,

P404, P604, P804 connectors. If not, Keysight will purchase a new IF

MUX board. Refer to your instrument’s Service Guide, Chapter 7

bookmark “Removing and Replacing the A20 IF Multiplexer Board” in

the PDF Service Guidea.

—Verify your Synthesizer board is version H or greater. If not, refer to

Appendix A:, “Synthesizer Board Upgrade (N5240-60074 (with

Tabs)/N5240-60076 (Without Tabs) Version F/G to Version H),” on

page A-1.

a. See “Downloading the Online PNA Service Guide” on page 8.

IMPORTANT!

— This document contains references to legacy and new A21 HMA26.5

Multiplier/Amplifier assemblies. Your model instrument may have

either legacy assemblies or the new parts installed. Both types of

assemblies are compatible with this upgrade. This note is for your

reference, because some figures contain legacy assemblies that

your instrument may not have installed.

— To verify your instrument’s A21 HMA26.5 Multiplier/Amplifier, refer

to “Verify the Model/Version of HMA26.5 Installed” on page 7.

— See also your instrument’s PDF Service Guide a.

a. See “Downloading the Online PNA Service Guide” on page 8.

6 Installation Note N5222-90114

Getting Prepared

— Enough time - refer to “About Installing the Upgrade” on page 10.

— Test equipment for the post-upgrade adjustments and full instrument

calibration. To view the equipment list, click the Chapter 3 bookmark “Tests

and Adjustments” in the PDF Service Guide1.

License Key Redemption

To enable the option product(s), you must request license key(s) file from the

Keysight Software Manager:

http://www.keysight.com/find/softwaremanager:

To complete the request, you will need to gather the following information:

— From the certificate

— Order number

— Certificate number

— From your instrument

— Model number

— Serial number

Using the information just gathered, you must request license key file(s) from

the Keysight Software Manager:

http://www.keysight.com/find/softwaremanager.

You will need to provide an email address, to which Keysight will promptly

email your license key(s) file. Refer to “License Key Redemption” on page 6.

Verify the License Contents

Refer to the license message you received from Keysight:

1. See “Downloading the Online PNA Service Guide” on page 8.

Ensure that you are connected to an external server, before attempting to

download your email and license key file.

If you are unfamiliar with the licensing process, refer to the

https://www.keysight.com/us/en/assets/9018-04534/installation-guides

/9018-04534.pdf (N5242-90024).

The enclosed Software Entitlement Certificate is a receipt, verifying that

you have purchased a licensed option for the PNA of your choice. You must

now use a Keysight Web page to request a license key file for the

instrument that will receive the option.

Installation Note N5222-90114 7

Getting Prepared

If the model number, serial number, or option number do not match those on

the license message you received from Keysight, you will not be able to install

the license key file. If this is the case, contact Keysight for assistance. Refer to

“Getting Assistance from Keysight” on page 4.

Verify the Model/Version of HMA26.5 Installed

This upgrade kit contains components for use with PNA models using the

legacy HMA26.5 part number 5087-7765. If your PNA has the newer HMA26.5

part number N5240-60101 installed you may discard these parts:

— A22 splitter 5087-7139

— W42 N5222-20009

— W43 N5222-20007

— W44 N5222-20008

(If you have the legacy 5086-7765 HMA26.5, please discard the N5245-20195

semi-rigid cables. Refer to Figure 1 on page 7.)

The new N5240-60101 HMA26.5 has the splitter integrated into the assembly.

Refer to Figure 1 on page 7.

Figure 1 Comparison of Legacy HMA26.5 (5087-7765) and New HMA26.5

(N5240-60101)

8 Installation Note N5222-90114

Getting Prepared

Downloading the Online PNA Service Guide

To view the online Service Guide for your PNA model number, use the following

steps:

Protecting Your Workspace from Electrostatic Discharge

For information, click on the Chapter 1 bookmark, “Electrostatic Discharge

Protection” in the PDF Service Guide1.

ESD Equipment Required for the Installation

1. See “Downloading the Online PNA Service Guide” on page 8.

Description Keysight Part Number

ESD grounding wrist strap 9300-1367

5-ft grounding cord for wrist strap 9300-0980

2 x 4 ft conductive table mat and 15-ft grounding wire 9300-0797

ESD heel strap (for use with conductive floors) 9300-1308

1. Go to www.keysight.com.

2. In the Search box, enter the model number of the analyzer (e.g., N5232B)

and click Search.

3. Click Support > Keysight Product Support.

4. In the Search Support area type your instrument’s model number (e.g.,

N2222B).

5. Press Enter.

6. Scroll down to the PRINT DOCUMENTATION section and click to select

Service Manual.

The Service Manual for your instrument will be displayed near the top of

the right column.

7. Click the hyperlink of the Service Guide title to download the PDF file.

8. When the PDF of the Service Guide is displayed, scroll through the

Contents section bookmarks to locate the information needed.

Installation Note N5222-90114 9

Getting Prepared

Tools Required for the Installation

Description Qty Part Number

T-6 TORX driver - set to 4 in-lbs (0.45 N.m) 1 N/A

T-10 TORX driver - set to 9 in-lbs (1.02 N.m) 1 N/A

T-20 TORX driver - set to 21 in-lbs (2.38 N.m) 1 N/A

5/16-in (8 mm) nutsetter or open end torque wrench - set to 10 in-lbs

(1.13 N.m)

1N/A

5/16-in (8 mm) nutsetter or open end wrench (to stabilize the bias tee

combiner when torquing cables)

1N/A

5/16-in (8 mm) nutsetter or open end torque wrench - set to 21 in-lbs

(2.38 N.m)

1N/A

T-6 TORX driver - set to 6 in-lbs (0.68 N.m) 1 N/A

T-20 TORX driver - set to 21 in-lbs (2.38 N.m) 1 N/A

5/16-in (8 mm) nutsetter or open end torque wrench- set to 8 in-lbs (0.9

N.m)

1N/A

3/16-in (5 mm) nutsetter or open end torque wrench - set to 6 in-lbs

(0.68 N.m)

1N/A

5/8-in (16 mm) nutsetter or open end torque wrench - set to 21 in-lbs

(2.38 N.m)

1N/A

1-in (25.4 mm) torque wrench - set to 72 in-lbs (8.15 N.m) 1 N/A

9 mm nutsetter or open end torque wrench - set to 21 in-lbs (2.38 N.m) 1 N/A

1/4-in (6 mm) open end wrench 1 N/A

Use a 5/16-in torque wrench set to 10 in-lbs on all cable connections,

except the front panel coupler to Bias-T combiner cable connections.

Torque these to 8 in-lbs.

Additional exception: Torque the front and rear panel bulkhead connectors

and these connections to 21 in-lb.

10 Installation Note N5222-90114

Getting Prepared

About Installing the Upgrade

Products affected N5221B and N5222B Option 205

Installation to be performed by Keysight service center or personnel qualified by Keysight

Estimated installation time 5 hours

Estimated adjustment time 3 hours

Estimated full instrument calibration time 7.5 hours

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Keysight Technologies

Keysight Technologies

Keysight Technologies 11644A Series Manual

Keysight Technologies

Keysight Technologies U3022AH10 Manual

Keysight Technologies

Keysight Technologies E5405A-Pro Series Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Manual de usuario

Keysight Technologies

Keysight Technologies 16192A Manual de operación

Keysight Technologies

Keysight Technologies 16454A Manual de operación

Keysight Technologies

Keysight Technologies N4000A SNS Series Manual de servicio

Keysight Technologies

Keysight Technologies U3042AM08 Manual

Keysight Technologies

Keysight Technologies N5991 Manual de usuario

Keysight Technologies

Keysight Technologies 85032B Manual

Keysight Technologies

Keysight Technologies 85054B Manual

Keysight Technologies

Keysight Technologies 85033E Guía de solución de problemas

Keysight Technologies

Keysight Technologies Infiniium V Series Manual de usuario

Keysight Technologies

Keysight Technologies N2142A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 4000 X Series Manual

Keysight Technologies

Keysight Technologies InfiniiVision 2000 Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision MSO-X 4022A Manual

Keysight Technologies

Keysight Technologies E7515A Manual de usuario

Keysight Technologies

Keysight Technologies InfiniiVision 3000G X Series Manual de usuario

Keysight Technologies

Keysight Technologies 85053B Manual

Keysight Technologies

Keysight Technologies U3042AE12 Manual

Keysight Technologies

Keysight Technologies InfiniiVision DSOX1204A Manual

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manual de usuario

Keysight Technologies

Keysight Technologies Infiniium 90000A Series Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario