Keysight Technologies N432A Manual de usuario

Keysight N432A Thermistor

Power Meter

User’s Guide

2 Keysight N432A User’s Guide

Notices

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and

retrieval or translation into a foreign

language) without prior agreement and

written consent from Keysight Technol-

ogies as governed by United States and

international copyright laws.

Manual Part Number

N432A-90002

Edition

Edition 6, December 8, 2020

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Technology Licenses

The hardware and/or software

described in this document are fur-

nished under a license and may be

used or copied only in accordance with

the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight prod-

ucts may be downloaded from the

Web. Go to http://www.keysight.com/

go/conformity. You can then search by

product number to find the latest Dec-

laration of Conformity.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acqui-

sition Regulation (“FAR”) 2.101. Pursu-

ant to FAR 12.212 and 27.405-3 and

Department of Defense FAR Supple-

ment (“DFARS”) 227.7202, the U.S.

government acquires commercial com-

puter software under the same terms

by which the software is customarily

provided to the public. Accordingly,

Keysight provides the Software to U.S.

government customers under its stan-

dard commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of which can

be found at http://www.keysight.com/

find/sweula. The license set forth in the

EULA represents the exclusive authority

by which the U.S. government may use,

modify, distribute, or disclose the Soft-

ware. The EULA and the license set

forth therein, does not require or per-

mit, among other things, that Keysight:

(1) Furnish technical information

related to commercial computer soft-

ware or commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish

to, or otherwise provide, the govern-

ment rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release, per-

form, display, or disclose commercial

computer software or commercial com-

puter software documentation. No

additional government requirements

beyond those set forth in the EULA

shall apply, except to the extent that

those terms, rights, or licenses are

explicitly required from all providers of

commercial computer software pursu-

ant to the FAR and the DFARS and are

set forth specifically in writing else-

where in the EULA. Keysight shall be

under no obligation to update, revise or

otherwise modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS

227.7102, the U.S. government

acquires no greater than Limited Rights

as defined in FAR 27.401 or DFAR

227.7103-5 (c), as applicable in any

technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DIS-

CLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED, WITH REGARD

TO THIS MANUAL AND ANY INFORMA-

TION CONTAINED HEREIN, INCLUD-

ING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR OF ANY INFORMATION CON-

TAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WAR-

RANTY TERMS COVERING THE MATE-

RIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

Keysight N432A User’s Guide 3

Certification

Keysight Technologies certifies that this product met its published specifications

at the time of shipment. Keysight further certifies that its calibration

measurements are traceable to the United States National Institute of Standard

and Technology (formerly National Bureau of Standards), to the extent allowed by

that organization’s calibration facility, and to the calibration facilities of other

International Standards Organization members.

General Warranty

The material contained in this document is provided “as is,” and is subject to

being changed, without notice, in future editions. Further, to the maximum extent

permitted by applicable law, Keysight disclaims all warranties, either express or

implied with regard to this manual and any information contained herein,

including but not limited to the implied warranties of merchantability and fitness

for a particular purpose. Keysight shall not be liable for errors or for incidental or

consequential damages in connection with the furnishing, use, or performance of

this document or any information contained herein. Should Keysight and the user

have a separate written agreement with warranty terms covering the material in

this document that conflict with these terms, the warranty terms in the separate

agreement shall control. Duration and conditions of warranty for this product may

be superseded when the product is integrated into (becomes a part of) other

Keysight products. During the warranty period, Keysight will, at its option, either

repair or replace products which prove to be defective. The warranty period begins

on the date of delivery or on the date of installation if installed by Keysight.

Warranty Service

For warranty service or repair, this product must be returned to a service facility

designated by Keysight. For products returned to Keysight for warranty service,

the Buyer shall prepay shipping charges to Keysight and Keysight shall pay

shipping charges to return the product to the Buyer. However, the Buyer shall pay

all shipping charges, duties, and taxes for products returned to Keysight from

another country.

4 Keysight N432A User’s Guide

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or

inadequate maintenance by the Buyer, Buyer-supplied products or interfacing,

unauthorized modification or misuse, operation outside of the environmental

specifications for the product, or improper site preparation or maintenance.

The design and implementation of any circuit on this product is the sole

responsibility of the Buyer. Keysight does not warrant the Buyer’s circuitry or

malfunctions of Keysight products that result from the Buyer’s circuitry. In

addition, Keysight does not warrant any damage that occurs as a result of the

Buyer’s circuit or any defects that result from Buyer-supplied products.

To the extent allowed by local law, Keysight makes no other warranty, expressed

or implied, whether written or oral with respect to this product and specifically

disclaims any implied warranty or condition of merchantability, fitness for a

particular purpose or satisfactory quality.

Exclusive Remedies

To the extent allowed by local law, the remedies provided herein are the Buyer’s

sole and exclusive remedies. Keysight shall not be liable for any direct, indirect,

special, incidental, or consequential damages (including lost profit or data),

whether based on warranty, contract, tort, or any other legal theory.

Keysight N432A User’s Guide 5

Restricted Rights Legend

The Software and Documentation have been developed entirely at private

expense. They are delivered and licensed as “commercial computer software” as

defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991), or

DFARS 252.227-7014 (Jun 1995), as a “commercial item” as defined in FAR

2.101(a), or as “restricted computer software” as defined in FAR 52.227-19 (Jun

1987) (or any equivalent agency regulation or contract clause), whichever is

applicable. You have only those rights provided for such Software and

Documentation by the applicable FAR or DFARS clause or the Keysight standard

software agreement for the product involved.

Technology Licenses

The hardware and/or software described in this document are furnished under a

license and may be used or copied only in accordance with the terms of such

license.

6 Keysight N432A User’s Guide

Safety Symbols

The following symbols on the instrument and in the documentation indicate

precautions which must be taken to maintain safe operation of the instrument.

Direct current (DC). Alternating current (AC).

Off (mains supply). On (mains supply).

Caution, risk of electric shock.

Caution, risk of danger (refer to this

manual for specific Warning or Caution

information).

Earth (ground) terminal. Frame or chassis (ground) terminal.

Protective earth (ground) terminal.

Equipment protected throughout by

double insulation or reinforced

insulation.

Both direct and alternating current. Out position of a bi-stable push

control.

Caution, hot surface. In position of a bi-stable push control.

Three-phase alternating current. Equipotentiality.

This symbol indicates the operating

switch for ‘Stand-by’ mode. Note, the

instrument is NOT isolated from the

mains when the switch is pressed. To

isolate the instrument, the mains

coupler (mains input cord) should be

removed from the power supply.

This symbol indicates the Fuse.

Keysight N432A User’s Guide 7

Safety Considerations

Read the information below before using this instrument.

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific warnings elsewhere in this manual violates safety

standards for design, manufacture, and intended use of the instrument. Keysight

Technologies assumes no liability for the customer’s failure to comply with these

requirements.

Recommended Calibration Interval

Keysight Technologies recommends a two-years calibration cycle for the N432A

Thermistor power meter.

8 Keysight N432A User’s Guide

General Safety Information

This is a Safety Class I instrument (provided with a protective earthing ground,

incorporated in the power cord). The mains plug shall only be inserted in a socket

outlet provided with a protective earth contact. Any interruption of the protective

conductor inside or outside of the instrument is likely to make the instrument

dangerous. Intentional interruption is prohibited.

WARNING

– DO NOT allow the mains supply voltage fluctuation to exceed +/- 10% of

the nominal supply voltage. Instrument is designed for use in

Overvoltage Category II and Pollution Degree 2.

– DO NOT operate the product in an explosive atmosphere or in the

presence of flammable gases or fumes.

– DO NOT use repaired fuses or short-circuited fuseholders: For continued

protection against fire, replace the line fuse(s) only with fuse(s) of the

same voltage and current rating and type.

– DO NOT perform procedures involving cover or shield removal unless you

are qualified to do so: Operating personnel must not remove equipment

covers or shields. Procedures involving the removal of covers and shields

are for use by service-trained personnel only.

– DO NOT service or adjust alone: Under certain conditions, dangerous

voltages may exist even with the equipment switched off. To avoid

dangerous electrical shock, service personnel must not attempt internal

service or adjustment unless another person, capable of rendering first

aid and resuscitation, is present.

– DO NOT operate damaged equipment: Whenever it is possible that the

safety protection features built into this product have been impaired,

either through physical damage, excessive moisture, or any other reason,

REMOVE POWER and do not use the product until safe operation can be

verified by service-trained personnel. If necessary, return the product to a

Keysight Technologies Sales and Service Office for service and repair to

ensure the safety features are maintained.

Keysight N432A User’s Guide 9

WARNING

– DO NOT substitute parts or modify equipment: Because of the danger of

introducing additional hazards, do not install substitute parts or perform

any unauthorized modification to the product. Return the product to a

Keysight Technologies Sales and Service Office for service and repair to

ensure the safety features are maintained.

CAUTION

CLEAN WITH SLIGHTLY DAMPENED CLOTH

Clean the outside of the instrument with a soft, lint-free, slightly dampened

cloth. Do not use detergent, volatile liquids, or chemical solvents.

10 Keysight N432A User’s Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

ICES/NMB-001 indicates that this ISM

device complies with the

Canadian ICES-001.

Cet appareil ISM est conforme a la

norme NMB-001 du Canada.

ISM GRP.1 Class A indicates that this

is an Industrial Scientific and Medical

Group 1 Class A product.

The CSA mark is a registered

trademark of the Canadian

Standards Association.

The RCM mark is a registered

trademark of the Australian

Communications and Media Authority.

This signifies compliance with the

Australian EMC Framework

Regulations under the terms of the

Radio Communications Act of 1992.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

This symbol is a South Korean Class A EMC Declaration.

This equipment is Class A suitable for professional use and is for use in electromagnetic environments

outside of the home.

KCC-REM-ATi-

WCPWR

Otros manuales para N432A

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies B2900B Series Manual de usuario

Keysight Technologies

Keysight Technologies U2000 Series Manual de usuario

Keysight Technologies

Keysight Technologies 34134A Manual de usuario

Keysight Technologies

Keysight Technologies B2981A Guía de instalación

Keysight Technologies

Keysight Technologies N9322C Manual de usuario

Keysight Technologies

Keysight Technologies N9000B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N5244BU-679 Manual de usuario

Keysight Technologies

Keysight Technologies M9393A Guía del usuario

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies E4417A Manual de usuario

Keysight Technologies

Keysight Technologies BT2152B Manual de servicio

Keysight Technologies

Keysight Technologies N9000A Manual de instalación y operación

Keysight Technologies

Keysight Technologies E8364-60108 Manual de instalación y operación

Keysight Technologies

Keysight Technologies B2980A Series Guía de instalación

Keysight Technologies

Keysight Technologies X-Series Manual de usuario

Keysight Technologies

Keysight Technologies M9391A PXIe Guía del usuario

Keysight Technologies

Keysight Technologies N8480 Series Manual de servicio

Keysight Technologies

Keysight Technologies N5221B Manual de usuario

Keysight Technologies

Keysight Technologies N9321C Manual de usuario

Keysight Technologies

Keysight Technologies EXA N9010B Manual de instalación y operación

Keysight Technologies

Keysight Technologies InfiniiMax III Series Manual de usuario

Keysight Technologies

Keysight Technologies EXA Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies PNA-L N5230A Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario