Keysight Technologies M9260A Guía del usuario

Keysight M9260A PXIe Audio

Analyzer

Startup Guide

2 Keysight M9260A Startup Guide

Notices

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and

retrieval or translation into a foreign

language) without prior agreement and

written consent from Keysight Technol-

ogies as governed by United States and

international copyright laws.

Manual Part Number

M9260-90000

Edition

Edition 3, May 2018

Printed in:

Printed in Malaysia

Published by:

Keysight Technologies

Bayan Lepas Free Industrial Zone,

11900 Penang, Malaysia

Technology Licenses

The hardware and/or software

described in this document are fur-

nished under a license and may be

used or copied only in accordance with

the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight prod-

ucts may be downloaded from the

Web. Go to http://www.keysight.com/

go/conformity. You can then search by

product number to find the latest Dec-

laration of Conformity.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acqui-

sition Regulation (“FAR”) 2.101. Pursu-

ant to FAR 12.212 and 27.405-3 and

Department of Defense FAR Supple-

ment (“DFARS”) 227.7202, the U.S.

government acquires commercial com-

puter software under the same terms

by which the software is customarily

provided to the public. Accordingly,

Keysight provides the Software to U.S.

government customers under its stan-

dard commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of which can

be found at http://www.keysight.com/

find/sweula. The license set forth in the

EULA represents the exclusive authority

by which the U.S. government may use,

modify, distribute, or disclose the Soft-

ware. The EULA and the license set

forth therein, does not require or per-

mit, among other things, that Keysight:

(1) Furnish technical information

related to commercial computer soft-

ware or commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish

to, or otherwise provide, the govern-

ment rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release, per-

form, display, or disclose commercial

computer software or commercial com-

puter software documentation. No

additional government requirements

beyond those set forth in the EULA

shall apply, except to the extent that

those terms, rights, or licenses are

explicitly required from all providers of

commercial computer software pursu-

ant to the FAR and the DFARS and are

set forth specifically in writing else-

where in the EULA. Keysight shall be

under no obligation to update, revise or

otherwise modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS

227.7102, the U.S. government

acquires no greater than Limited Rights

as defined in FAR 27.401 or DFAR

227.7103-5 (c), as applicable in any

technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DIS-

CLAIMS ALL WARRANTIES, EITHER

EXPRESS OR IMPLIED, WITH REGARD

TO THIS MANUAL AND ANY INFORMA-

TION CONTAINED HEREIN, INCLUD-

ING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR CONSE-

QUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR OF ANY INFORMATION CON-

TAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WAR-

RANTY TERMS COVERING THE MATE-

RIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Safety Information

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

Keysight M9260A Startup Guide 3

Safety Symbols

The following symbol on the instrument and in the documentation indicate

precautions which must be taken to maintain safe operation of the instrument.

Safety Considerations

Read the information below before using this instrument.

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or with specific warnings elsewhere in this manual violates safety

standards for design, manufacture, and intended use of the instrument. Keysight

Technologies assumes no liability for the customer’s failure to comply with these

requirements.

Caution, risk of danger (refer to this manual for specific Warning or Caution information)

WARNING

– If this product is not used as specified, the protection provided by the

equipment could be impaired. This product must be used in a normal

condition (in which all means for protection are intact) only.

– No operator serviceable inside. Refer servicing to qualified personnel. To

prevent electrical shock do not remove covers.

– To prevent electrical shock, disconnect the Keysight Technologies

instrument from mains before cleaning. Use a dry cloth or one slightly

dampened with water to clean the external case parts. Do not attempt to

clean internally. To clean the connectors, use alcohol in a well ventilated

area. Allow all residual alcohol moisture to evaporate, and the fumes to

dissipate prior to energizing the instrument.

4 Keysight M9260A Startup Guide

CAUTION

– To maintain protection from electric shock and fire, replacement

components in mains circuits - including the power transformer, test

leads, and input jacks - must be purchased from Keysight. Standard fuses

with applicable national safety approvals may be used if the rating and

type are the same. Other components that are not safety-related may be

purchased from other suppliers as long as they are equivalent to the

original component (note that selected parts should be purchased only

through Keysight to maintain accuracy and functionality of the product).

If you are unsure about the applicability of a replacement component, call

a Keysight office for information.

– The maximum working voltage for the M9260A input port is ±46 Vp while

the output port can only source up to ±10 Vp. Do not exceed the

maximum M9260A input voltage to prevent damage to the module.

Keysight M9260A Startup Guide 5

Environmental Conditions

The M9260A is designed for indoor use and in an area with low condensation. The

table below shows the general environmental requirements for this instrument.

Environmental condition Requirement

Temperature

Operating condition

– 0 °C to 55 °C

Storage condition

– –40 °C to 71 °C

Humidity

Operating condition

– Up to 95% RH at 40 °C (non-condensing)

Storage condition

– Up to 90% RH at 65 °C (non-condensing)

Altitude Up to 3000 m

Pollution degree 2

6 Keysight M9260A Startup Guide

Regulatory Information

The M9260A complies with the following safety and Electromagnetic

Compatibility (EMC) compliances:

Safety compliance

IEC 61010-1/EN 61010-1

EMC compliance

– IEC 61326-1/EN 61326-1 (Immunity for industrial electromagnetic

environment)

– Canada: ICES/NMB-001: Issue 4, June 2006

– Australia/New Zealand: AS/NZS CISPR 11

Supplementary information:

– The product was tested in a typical configuration with Keysight Technologies

test systems.

– This is a sensitive measurement apparatus by design and may have some

performance loss when exposed to ambient continuous electromagnetic

phenomenon.

Keysight M9260A Startup Guide 7

South Korean Class A EMC declaration:

Information to the user:

This equipment has been conformity assessed for use in business environments. In

a residential environment this equipment may cause radio interference.

– This EMC statement applies to the equipment only for use in business

environment.

– 사용자 안내문은 “ 업무용 방송통신기자재 ” 에만 적용한다 .

For Class B equipment there is no current statement required.

사 용 자 안 내 문

이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가

정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다 .

8 Keysight M9260A Startup Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

This symbol indicates the time period

during which no hazardous or toxic

substance elements are expected to

leak or deteriorate during normal use.

Forty years is the expected useful life

of the product.

ICES/NMB-001 indicates that this ISM

device complies with the

Canadian ICES-001.

Cet appareil ISM est conforme a la

norme NMB-001 du Canada.

ISM GRP.1 Class A indicates that this

is an Industrial Scientific and Medical

Group 1 Class A product.

The RCM mark is a registered

trademark of the Australian

Communications and Media Authority.

This symbol is a South Korean Class A

EMC Declaration. This is a Class A

instrument suitable for professional

use and in electromagnetic

environment outside of the home.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical or electronic product in

domestic household waste.

Keysight M9260A Startup Guide 9

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/

96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard this

electrical or electronic product in domestic household waste.

Product category

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Keysight Service Center,

or visit http://about.keysight.com/en/companyinfo/environment/takeback.shtml

for more information.

Sales and Technical Support

To contact Keysight for sales and technical support, refer to the support links on

the following Keysight websites:

–www.keysight.com/find/M9260A

(product-specific information and support, software and documentation

updates)

–www.keysight.com/find/assist

(worldwide contact information for repair and service)

10 Keysight M9260A Startup Guide

THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies N432A Manual de usuario

Keysight Technologies

Keysight Technologies B2900A Series Manual de usuario

Keysight Technologies

Keysight Technologies 34136A Manual de usuario

Keysight Technologies

Keysight Technologies B1507A Manual de usuario

Keysight Technologies

Keysight Technologies M9391A PXIe Guía del usuario

Keysight Technologies

Keysight Technologies 16034G Manual de usuario

Keysight Technologies

Keysight Technologies E5061B Manual de usuario

Keysight Technologies

Keysight Technologies X-Series Guía de inicio rápido

Keysight Technologies

Keysight Technologies N432A Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox Manual de usuario

Keysight Technologies

Keysight Technologies i7090 Manual de usuario

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies U5303A Guía del usuario

Keysight Technologies

Keysight Technologies B2900B Series Manual de usuario

Keysight Technologies

Keysight Technologies N7020A Manual de usuario

Keysight Technologies

Keysight Technologies N5250C PNA Series Manual de usuario

Keysight Technologies

Keysight Technologies N9020A Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9000A Manual de instalación y operación

Keysight Technologies

Keysight Technologies ENA Series Manual de usuario

Keysight Technologies

Keysight Technologies E5061B ENA Series Manual de usuario

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies C Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario