Keysight Technologies 1130B Series Manual de usuario

Keysight 1130B-Series Differential

and Single-Ended Probes

User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

01130-97014

Edition

Ninth Edition, January 2019

Available in electronic format only

Published by:

Keysight Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is subject

to being changed, without notice, in

future editions. Further, to the maxi-

mum extent permitted by applicable

law, Keysight disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Keysight shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any infor-

mation contained herein. Should

Keysight and the user have a separate

written agreement with warranty terms

covering the material in this document

that conflict with these terms, the war-

ranty terms in the separate agreement

shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is cus-

tomarily provided to the public. Accordingly,

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its

End User License Agreement (EULA), a copy

of which can be found at http://www.key-

sight.com/find/sweula. The license set forth

in the EULA represents the exclusive author-

ity by which the U.S. government may use,

modify, distribute, or disclose the Software.

The EULA and the license set forth therein,

does not require or permit, among other

things, that Keysight: (1) Furnish technical

information related to commercial computer

software or commercial computer software

documentation that is not customarily pro-

vided to the public; or (2) Relinquish to, or

otherwise provide, the government rights in

excess of these rights customarily provided

to the public to use, modify, reproduce,

release, perform, display, or disclose com-

mercial computer software or commercial

computer software documentation. No addi-

tional government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms, rights,

or licenses are explicitly required from all

providers of commercial computer software

pursuant to the FAR and the DFARS and are

set forth specifically in writing elsewhere in

the EULA. Keysight shall be under no obliga-

tion to update, revise or otherwise modify

the Software. With respect to any technical

data as defined by FAR 2.101, pursuant to

FAR 12.211 and 27.404.2 and DFARS

227.7102, the U.S. government acquires no

greater than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data. 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any tech-

nical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a CAU-

TION notice until the indicated con-

ditions are fully understood and

met.

WARNING

A WARNING notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

Contents

1 Getting Started

Introduction 8

Probe Handling 12

Using Offset With InfiniiMax Active Probes 16

Slew Rate Requirements for Different Technologies 18

Available Accessories 20

Safety Information 31

Troubleshooting 33

2UsingProbeHeads

Recommended Configurations at a Glance 36

1. MX0100A InfiniiMax Micro Probe Head 38

2. E2677B Differential Solder-in Head with Full BW Resistors 49

3. E2678B Differential Socketed Head 51

4. E2675B Differential Browser 54

5. N5380B SMA Head 57

6. N2851A QuickTip Probe Head 60

7. E2679B Single-Ended Solder-In Head 64

8. E2676B Single-Ended Browser 65

9. E2677B Differential Solder-In Head with Medium BW Resistors 67

10. E2679B Single-Ended Solder-In Head with Long Wire 69

11. E2678B Differential Socketed Head with Damped Wire Accessory 71

12. E2678B Differential Socketed Head with Header Adapter 73

Replacing Resistors on E2677B/9B Solder-In Probe Heads 74

3 Calibrating Probes

Calibration for Solder-In and Socketed Probe Heads 80

Calibration for Hand-held Browser Probe Heads 87

Calibration for N5380A/B SMA Probe Heads 89

4 Characteristics and Specifications

General 92

Environmental 94

Regulatory 95

Probe Dimensions 96

MX0100A Probe Head Dimensions 97

5 1130B Performance Data Plots

E2675B Differential Browser 100

E2676B Single-Ended Browser 103

41130B-Series Probes User’s Guide

E2677B Differential Solder-in Probe Head (Full BW) 106

E2677B Differential Solder-in Probe Head (Medium BW) 109

E2678A/B Differential Socketed Probe Head (Full BW) 112

E2678A/B Differential Socketed Probe Head with Damped Wire Accessory 115

E2679B Single-Ended Solder-in Probe Head (Full BW) 118

E2679B Single-Ended Solder-in Probe Head (Medium BW) 121

N2851A QuickTip Head with N2849A QuickTip 124

6 1131B Performance Data Plots

E2675B Differential Browser 126

E2676B Single-Ended Browser 129

E2677B Differential Solder-in Probe Head (Full BW) 132

E2677B Differential Solder-in Probe Head (Medium BW) 135

E2678A/B Differential Socketed Probe Head (Full BW) 138

E2678A/B Differential Socketed Probe Head with Damped Wire Accessory 141

E2679B Single-Ended Solder-in Probe Head (Full BW) 144

E2679B Single-Ended Solder-in Probe Head (Medium BW) 147

N2851A QuickTip Head with N2849A QuickTip 150

7 1132B Performance Data Plots

E2675B Differential Browser 152

E2676B Single-Ended Browser 155

E2677B Differential Solder-in Probe Head (Full BW) 158

E2677B Differential Solder-in Probe Head (Medium BW) 161

E2678A/B Differential Socketed Probe Head (Full BW) 164

E2678A/B Differential Socketed Probe Head with Damped Wire Accessory 167

E2679B Single-Ended Solder-in Probe Head (Full BW) 170

E2679B Single-Ended Solder-in Probe Head (Medium BW) 173

N2851A QuickTip Head with N2849A QuickTip 176

8 1134B Performance Data Plots

E2675B Differential Browser 178

E2676B Single-Ended Browser 181

E2677B Differential Solder-in Probe Head (Full BW) 184

E2677B Differential Solder-in Probe Head (Medium BW) 187

E2678A/B Differential Socketed Probe Head (Full BW) 190

E2678A/B Differential Socketed Probe Head with Damped Wire Accessory 193

E2679B Single-Ended Solder-in Probe Head (Full BW) 196

E2679B Single-Ended Solder-in Probe Head (Medium BW) 199

N5380B SMA Probe Head 202

N2851A QuickTip Head with N2849A QuickTip 204

9 Performance Verification

Using the 8720ES VNA successfully 206

Procedure 207

Performance Test Record 214

1130B-Series Probes User’s Guide 5

10 SPICE Models

SPICE Model for Differential Probe Heads 217

SPICE Model for Single-Ended Probe Heads 218

SPICE Deck and Measured/Modeled Data Matching 219

11 Replacement Parts

E2675B Differential Browser Probe Head 230

E2677B Differential Solder-In Probe Head 230

E2678A/B Differential Socketed Probe Head 231

E2679B Single-Ended Solder-in Probe Head 231

Other Accessories 232

Index

61130B-Series Probes User’s Guide

Keysight InfiniiMax I Series Probes

User’s Guide

1 Getting Started

Introduction 8

Probe Handling 12

Using Offset With InfiniiMax Active Probes 16

Slew Rate Requirements for Different Technologies 18

Available Accessories 20

E2668B Single-Ended Connectivity Kit 20

E2669B Differential Connectivity Kit 21

N5450B Extreme Temp Cable Extension Kit 23

N2880A InfiniiMax In-Line Attenuator Kit 24

N2881A InfiniiMax DC Blocking Caps 28

MX0102A Soldering Toolkit 29

Safety Information 31

Troubleshooting 33

The 1130/1/2/4B InfiniiMax active probes are designed for probing differential and

single-ended high-frequency signals. The probes are compatible with the Infiniium

AutoProbe Interface which completely configures the Infiniium series of

oscilloscopes for the probes.

WARNING

Before using the probe, refer to “Safety Information" on page 31.

CAUTION

Before using the probes, refer to “Probe Handling" on page 12.

81130B-Series Probes User’s Guide

1Getting Started

Introduction

Before you can use the probe, you must connect one of the available probe heads

to an 1130/1/2/4B probe amplifier.

Figure 1 Probe Amplifier with Attached Head

Probe Heads

The available probe heads are shown in Figure 2 on page 9 and are documented in

Chapter 2, “Using Probe Heads". The InfiniiMax I probe heads are designed

specifically for the 1130/1/2/4B probes amplifiers. The InfiniiMax II probe heads

are designed for 1168/9B probe amplifiers, but can also be used with the

1130/1/2/4B probe amplifiers.

The probe heads can be ordered at the same time as 1130/1/2/4B probe

amplifiers. The E2669B and E2668B connectivity kits, described on page 21 and

page 20 conveniently package multiple probe heads and their accessories.

Differential probe heads offer easy measurement of differential signals and greatly

improve the measurement of single-ended signals. Single-ended probe heads

offer extremely small size for probing single-ended signals in confined spaces.

Compatible Oscilloscopes

Table 1 on page 10 lists the oscilloscopes that are compatible with the

1130/1/2/4B probes. Is Your Oscilloscope Software Up-to-Date? Keysight

periodically releases Oscilloscope software updates to support your probe, fix

known defects, and incorporate product enhancements. To download the latest

firmware, go to www.keysight.com and search for your oscilloscope’s topic. Click

on the “Drivers, Firmware & Software” tab.

Getting Started 1

1130B-Series Probes User’s Guide 9

Figure 2 Available Probe Heads and Accessories

NOTE

N2849A QuickTips are also compatible with the N2848A InfiniiMode probe heads which are

designed for N2830/1/2A InfiniiMax III+ and N2800/1/2/3A InfiniiMax III probes.

10 1130B-Series Probes User’s Guide

1Getting Started

Channel Identification Rings

When multiple probes are connected to the oscilloscope, use the channel

identification rings to associate the channel inputs with each probe. Place one

colored ring near the probe’s channel connector and place an identical color ring

near the probe head.

Inspecting the Probe

Figure 3 on page 11 shows the accessories that are shipped with the 1130/1/2/4B

probe amplifiers. The probe amplifiers do not come with a probe head unless

selected at the time of order. Any head shown in Figure 2 on page 9 can be

ordered at any time for any 1130/1/2/4B probes.

•Inspect the shipping container for damage.

Keep the damaged shipping container or cushioning material until the contents

of the shipment have been checked for completeness and the probe has been

checked mechanically and electrically.

•Check the accessories.

Table 1 Compatible Oscilloscopes

Oscilloscope Adapter Required

Infiniium Oscilloscopes

S-Series none

90000 X-, and Q-Series N5442A

90000A Series none

86100C/D Series N1022A/B

9000 H-Series none

9000A-Series none

8000A-Series none

InfiniiVision Oscilloscopes

6000 X-Series none

4000 X-Series none

3000 X-Series none

7000A Series none

6000A Series (350 MHz — 1 GHz) none

5000A Series none

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies E4980A Guía de inicio rápido

Keysight Technologies

Keysight Technologies B2981A Guía de instalación

Keysight Technologies

Keysight Technologies FieldFox A Series Manual de usuario

Keysight Technologies

Keysight Technologies BT2152A Manual de servicio

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies N9320A RF Manual de usuario

Keysight Technologies

Keysight Technologies B2901A Manual de usuario

Keysight Technologies

Keysight Technologies N9000B Manual de instalación y operación

Keysight Technologies

Keysight Technologies B2900A Series Manual de usuario

Keysight Technologies

Keysight Technologies EPM Series Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox N9923A Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox N9912A Manual del propietario

Keysight Technologies

Keysight Technologies 34980A Manual de usuario

Keysight Technologies

Keysight Technologies U1084A Guía del usuario

Keysight Technologies

Keysight Technologies N2893A Manual de usuario

Keysight Technologies

Keysight Technologies PNA-X N5249A Manual de usuario

Keysight Technologies

Keysight Technologies P939 A Series Manual de usuario

Keysight Technologies

Keysight Technologies N432A Manual de usuario

Keysight Technologies

Keysight Technologies E5061B Manual de usuario

Keysight Technologies

Keysight Technologies B2900B Series Manual de usuario

Keysight Technologies

Keysight Technologies N437 Series Instrucciones de instalación y funcionamiento

Keysight Technologies

Keysight Technologies UXA Manual de instalación y operación

Keysight Technologies

Keysight Technologies E5072A Manual de usuario

Keysight Technologies

Keysight Technologies V3500A Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario