Kane 250 Manual de usuario

KANE 250 QUICK REFERENCE GUIDE

INSTRUMENT FEATURES AND KEYPAD

Infra-red Printer emitter

Display

Function Keys

Rotary Switch

Particle Filter

Water Trap

Analyser Connections Flue Gas Inlet

ON / OFF

- Turns analyser ON and OFF

↓

PUMP

- Turns pump ON and OFF.

- Changes top line display.

- Scroll key when using the

Menu.

↑

PRINT/BACKLIGHT

- Print ‘live’ or stored data.

- Turns on Backlight.

- Scroll key when using the

Menu.

9

STORE

- Stores readings in the Memory.

- Enter key when using the

Menu.

BEFORE USING ANY ANALYSER CHECK THAT:

- The calibration date has not expired

- The particle filter is not dirty

- The water trap and flue probe hose are empty of water

- The water trap is fitted correctly to the instrument including the

drain plug

- The flue probe hose is connected properly to the water trap

- The flue temperature plug is connected into Tf

USING THE ANALYSER

Switch the analyser ON .

It will now purge for approximately 20 seconds after which it will show a

set a readings on the display and now is a good time to check the

battery status.

Insert the probe into the centre of the flue after approximately 60

seconds the readings should stabilise.

With the probe in the flue you can now print a live test result. Switch on

your printer and line up the bottom of it, with the top of your analyser,

now press the PRINTER key until the display shows printing.

If you want to store the reading in the analyser memory, again with the

probe in the flue, hold down the STORE key until the display

shows you the test number at which it will log your readings.

To retrieve a stored reading dial the rotary switch down to the menu

position and using either of the arrow keys ↑or ↓scroll through the

menu to the store feature. Press the STORE key and scroll to

view, select the test number you want to print by using the arrow keys to

count up (press lightly until you hear a beep). Once you have selected

your results, press the PRINT key .

The analyser will automatically purge for 30 seconds when switched

OFF .

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario