Intellinet 524063 Manual de usuario

GiGabit

EthErnEt

rackmount

WEb-Smart

SWitch

uSEr

manual

MODELS 524063

& 524087

INT-524063/524087-UM-0308-01

Model shown: 524063, 24-port

introduction

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™

Gigabit Ethernet Rackmount Web-Smart Switch, Model 524063 (24-port)

or Model 524087 (16-port).

This handy device lets you increase the speed of your network with

10/100/1000 Mbps auto-sensing ports that automatically detect optimal

network speeds, and it lets you increase the speed of your own work

through user-friendly Web-based management for uncomplicated

administration.

Easy-to-follow instructions in this user manual help make installation of

the switch quick and simple, so you’ll also soon be enjoying the benets

of these additional features:

• All RJ-45 ports with Auto-MDIX (auto uplink) support

• Supports NWay auto-negotiation

• Broadcast storm control with multicast packet rate settings

• Store and forward switching architecture

• Full/half duplex operation

• IEEE 802.3x ow control for full duplex

• Zero packet loss backpressure ow control for half duplex

• Packet ltering/forwarding rates: 1,488,000 pps (1000 Mbps), 148,800 pps

(100 Mbps), 14,880 pps (10 Mbps)

• Supports port controls (speed, ow control and maximum frame size)

• Supports VLAN (tag-based and port-based)

• Supports link aggregation (trunking)

• Supports QoS (Quality of Service) with 2 priority levels

• Provides IEEE 802.1x port-based security

• Supports port mirroring

• Supports jumbo frames up to 9.6 kBytes

• 19” rackmount

• LEDs for power, link/activity, connection speed

• Lifetime Warranty

NOTE: Some screen images have been modied to t the manual format.

SEtup

• Using twisted-pair cable, connect the switch to your computer.

• Using the included power cord, connect the Gigabit Ethernet

Rackmount Web-Smart Switch to an AC power source.

confiGuration

1. Set your PC’s

IP address to

192.168.2.xxx

(where “xxx”

is a value from

2 to 254).

2. Open the Web

browser; go to

192.168.2.1 to

display the

conguration

LED Status Operation

POWER On There is power to the unit.

1000M On The corresponding port is transmitting/receiving at 1000 Mbps.

Off The corresponding port is transmitting/receiving at 10/100 Mbps.

LINK/ACT On The corresponding port is connected to another device.

3. Enter “admin” in the

Password eld, then

click “Apply.” The

authentication process

will now allow you to

navigate among/within

the primary menu options: Conguration, Monitoring and Maintenance.

Conguration

System

This screen presents the

MAC address, system

rmware version and

several other settings/

readings. You can change

the user name, password

and IP address, then click

“Apply” to conrm any

changes. After that, you

can reset the switch to

make the new username,

password or IP address

take effect.

Ports

This screen gives

you the option of

enabling/disabling

Jumbo Frames.

Plus, by selecting

each individual port

you can:

• enable/disable

the port

• choose between

full and half

duplex

• select a Mode option from the dropdown menu, such as “Auto Speed”

• enable/disable Flow Control

VLAN

Depending on the model

of the Gigabit Ethernet

Rackmount Web-Smart

Switch, there are either

24 VLAN groups (1 – 24

for Model 524063) or 16

VLAN groups (1 – 16 for

Model 524087). Select

and enter a group into

the “VLAN ID” eld, click

“Add,” then click the port number(s) you want to put into the selected

VLAN group.

Aggregation/Trunking

Set up any port trunk groups you prefer, then click the port numbers you

want to include in the same group. There are eight groups that can be

created, and the maximum number of ports for any one group is 24 for

Model 524063; 16 for Model 524087.

LACP

Select the port number(s) for

which you want to enable/disable

the protocol.

RSTP

Select the port

number(s) for which

you want to enable/

disable the protocol.

802.1x

This screen gives you drop-down menu options — “Auto,” “Force

Authorized” and “Force Unauthorized” — for the Admin State of the

selected port(s).

IGMP

Snooping

This screen

allows you to

enable/disable

IGMP for the

selected

port(s).

Port Mirroring

Port Mirroring is used to mirror trafc

from a source port to a destination port

for analysis. Select the destination port

(1 – 24 for Model 524063; 1 – 16 for

Model 524087) in the left-hand column,

then select the source port by checking

the corresponding “Mirror Source” box

in the right-hand column.

QoS (Quality of Service)

When QoS Mode is enabled, you can

select the Quality of Service for each

individual port.

Filter

Select the port

number(s) for

which you want to

enable/disable IP

address ltering.

Rate Limit

Select the port number(s)

for which you want to

establish/change speed

settings.

Storm Control

This screen lets you congure the

various settings of Storm Control

in order to minimize interference

with trafc to and from the switch.

Monitoring

Statistics Overview

This screen lets you monitor the current status and statistics for each of

the ports.

Detailed Statistics

This screen lets you view detailed statistics by clicking on the port in the

top panel.

Otros manuales para 524063

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Intellinet

Intellinet

Intellinet IPS-54GM06-10G-450W Manual de usuario

Intellinet

Intellinet 561099 Manual de usuario

Intellinet

Intellinet IES-48GM04 Manual de usuario

Intellinet

Intellinet 560641 Manual de usuario

Intellinet

Intellinet 501620 Manual de usuario

Intellinet

Intellinet 561143 Manual de usuario

Intellinet

Intellinet 560900 Manual de usuario

Intellinet

Intellinet 509961 Manual de usuario

Intellinet

Intellinet IES-08FP Manual de usuario

Intellinet

Intellinet 524063 Manual de usuario

Intellinet

Intellinet Cat5e 162470 Manual de usuario

Intellinet

Intellinet 502931 Manual de usuario

Intellinet

Intellinet 561747 Manual de usuario

Intellinet

Intellinet 503723 Manual de usuario

Intellinet

Intellinet 561792 V2 Manual de usuario

Intellinet

Intellinet IPS-5G01-140W Manual de usuario

Intellinet

Intellinet 561143 Manual de usuario

Intellinet

Intellinet 561501 Manual de usuario

Intellinet

Intellinet 560665 Manual de usuario

Intellinet

Intellinet 519021 Manual de programación

Intellinet

Intellinet 720342 Manual de usuario

Intellinet

Intellinet 561907 Manual de usuario

Intellinet

Intellinet 523929 Manual de usuario

Intellinet

Intellinet 561082 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario