Intellinet KVM 157025 Manual de usuario

INT-157025/157032-QSG-1106-01

KVM SWITCH

QUICK START GUIDE

MODELS 157025 & 157032

Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™ KVM Switch. This compact

KVM Switch with Audio and Mic switching functionality allows you to access, control, boot and

reboot two (Model 157025) or four (Model 157032) USB-enabled multimedia computers with only

one USB keyboard, mouse, monitor and optional speaker set and microphone, using the Switching

Software Client installed on your PCs.

INSTALLATION

1. Insert the enclosed CD into your CD drive. The

installer program, USBKVMIn.exe, will run (or you

can ﬁnd it with Explorer and double-click its icon

to start installation). Complete the software

installation on each PC to be connected to the

switch. When completed, you’ll see a KVM

Switcher icon on the system tray of the desktop.

Right-click to display the operation menu; double-

click to display the conﬁguration box. (See KVM

Switcher section for details.)

No live connection

detected Current active PC channel

is on port 1 (or 2, 3 or 4)

NOTE: The KVM Switcher software supports only the Windows operating system on PC platforms.

For other OS platforms, such as Linux, you can still use the keyboard hotkey — ScrLk + ScrLk — to

switch PCs. However, this switching hotkey is not available on non-PC platforms such as MacOS.

When connected to a Mac, use the face-panel button to switch ports.

2. Connect the shared USB keyboard, mouse,

monitor, speaker/headphone and microphone

each to its port on your KVM Switch.

3. Connect each KVM PC port to a computer using

the slim 3-in-1 KVM combo cable and the audio/

mic cable. Once you have

connected the switch and

computers properly, you can

operate the KVM Switch.

NOTE: Some older computers with

a USB interface may need to

manually enable the USB option in

the BIOS settings before using any

USB devices. If your USB interface does not

work, check the USB option status in the BIOS.

NOTE: If using Windows 95/98/SE without a USB mouse, an error message may appear saying

that a mouse is not detected and giving you the option of ignoring the same message in the future.

Since you likely would have no mouse movement to disable this message, it’s recommended that a

USB mouse be installed on your computer before connecting it to this KVM Switch.

OPERATION

There are three ways to control PC switching: using the face-panel push buttons, hotkey

sequences or the KVM Switcher software. (For audio/mic switching, use the hotkey command.)

Face-Panel Buttons

The face-panel buttons allow you direct control over PC port switching. Simply press the button to

switch to the corresponding PC port (and audio/mic channel, if binding is enabled). By default, PC

port switching and audio/mic port switching are bound together. NOTE: You can use the face-panel

button to switch to an empty port that is not connected with any computer. Normally, if you use

keyboard hotkeys or the KVM Switcher software, you will not be able to switch to an empty port.

Keyboard Hotkeys

A user-deﬁnable keyboard hotkey sequence for a PC consists of at least three speciﬁc keystrokes:

Ctrl + Alt + [command key]

For other operating systems on a PC, such as Linux, you can use this universal hotkey sequence:

ScrLk + ScrLk

NOTE: The universal hotkey is not available for Mac. And neither the universal hotkey nor user-

deﬁnable hotkeys allow you to switch to an empty port that is not connected with any computer.

To switch to an empty port, just press the corresponding face-panel button.

Each keystroke within a hotkey sequence should be pressed within 2 seconds. Otherwise, the

hotkey sequence will not be validated.

After switching ports, wait for the KVM Switch icon to show the target port before switching again.

The icon can be found on the system tray of your Windows desktop after its installation.

Hotkeys are functional only after your PCs boot into the OS. If you want to switch a PC in the BIOS/

preboot stage, press the corresponding face-panel button.

KVM Switcher

In addition to PC switching, the KVM Switcher software offers more advanced functions.

Switch PCs by Operation Menu: Right-click the KVM Switcher icon to

display the operation menu, then select whichever PC that is available for

switching. Once you select a PC channel, it’ll immediately switch to that PC.

Unconnected port(s) and the active port are grayed-out and non-selectable.

Switch PCs by Keyboard Hotkeys: Hit the hotkey according to your current

deﬁnition: Hotkey sequence = Ctrl + Alt + [command key]. The factory default

hotkey setting is Ctrl + Alt + 1/2/3/4 for PCs 1–4. You can also use ScrLk + ScrLk.

Start Auto-Scan: Right-click the KVM Switcher icon to display

the operation menu; select "Start Auto-Scan."

Stop Auto-Scan: (While auto-scanning) right-click the KVM

Switcher icon to display the operation menu; select "Stop

Auto-Scan." Or press any button on the face-panel.

KVM Switcher Conﬁguration: Right-click the KVM Switcher

icon; select "Settings" or double-click the icon to bring up the

conﬁguration dialog box.

Deﬁne Hotkey Commands: You can specify command keys

by entering them in the corresponding editable ﬁelds. Except

for control keys (Alt, Ctrl, Shift, Caps, Tab, Esc), function

keys and edit keys, any key on the keyboard can be used

to deﬁne a hotkey command, including keys on the number

pad. Remember, you can also use the universal hotkey for

PC switching: ScrLk + ScrLk.

Fix the Audio Port at PC "X": Once this option is checked, the audio/mic channel at the

designated PC will be "ﬁxed," or non-switchable.

Auto-Scan Period: Select from 10 to 60 seconds (in increments of 5 seconds). The auto-scan

period is the time your KVM Switch will wait to switch to the next PC.

SPECIFICATIONS

General

• PC connections: Model 157025, 2; Model 157032: 4

• Console connections: 1

• PC port connectors, Model 157025:

- 2 x USB Type A (keyboard, mouse)

- 2 x HD15 male (video)

- 2 x USB mini 5-pin B (audio, for use with included

USB mini to 3.5 mm audio cable)

• PC port connectors, Model 157032:

- 4 x USB Type A (keyboard, mouse)

- 4 x HD15 male (video)

- 4 x 3.5 mm audio cable (for microphone and

speaker soundcard connection)

• Console port connectors:

- 2 x USB Type A (keyboard, mouse)

- 1 x HD15 female (video)

• Audio connectors, Model 157025:

- 2 x 3.5 mm jacks (microphone, speaker)

• Audio connectors, Model 157032:

- 2 x 3.5 mm jacks (console mic input, speaker output)

- 4 x 3.5 mm jack (microphone for PC ports)

- 4 x 3.5 mm jack (speakers for PC ports)

• Computer selection via buttons, hotkeys or Windows

switching software client

• Video resolution: max. 2048 x 1536

• Video bandwidth: max. 350 MHz

• FCC Class B, CE, RoHS

Standards

• USB 1.1

LEDs

• One LED per channel

Power

• USB bus powered

• 5 V

• Power consumption: max. 500 mA

Environmental

• Plastic housing

• Dimensions, Model 157025: 96 (L) x 61 (W) x 24 (H) mm

(3.8 x 2.4 x 0.9 in.); 0.7 kg (1.59 lbs.)

• Dimensions, Model 157032: 164 (L) 72 (W) 26 (H) mm

(6.5 x 2.8 x 1.0 in.); 1.5 kg (3.4 lbs.)

• Operating temperature: 0 – 40°C (32 – 104°F)

• Operating humidity: 0 – 90% RH, non-condensing

• Storage temperature: -20 – 60°C (-4 – 140°F)

Are you completely satisﬁed with this product?

Please contact your INTELLINET NETWORK SOLUTIONS™ dealer

with comments or questions.

SOLUTIONS

All products mentioned are trademarks or registered trademarks of their respective owners.

www.intellinet-network.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Intellinet

Intellinet

Intellinet 561082 Manual de usuario

Intellinet

Intellinet 560559 Manual de usuario

Intellinet

Intellinet 502023 Manual de usuario

Intellinet

Intellinet 561501 Manual de usuario

Intellinet

Intellinet 502931 Manual de usuario

Intellinet

Intellinet 523790 Manual de usuario

Intellinet

Intellinet Cat5e 162470 Manual de usuario

Intellinet

Intellinet IPS-54GM06-10G-450W Manual de usuario

Intellinet

Intellinet 560559 Manual de usuario

Intellinet

Intellinet IIS-8G02M Manual de usuario

Intellinet

Intellinet 502023 Manual de usuario

Intellinet

Intellinet 561433 Manual de usuario

Intellinet

Intellinet 561686 Manual de usuario

Intellinet

Intellinet 520409 Manual de usuario

Intellinet

Intellinet 524117 Manual de usuario

Intellinet

Intellinet 523769 Manual de usuario

Intellinet

Intellinet 561808 Manual de usuario

Intellinet

Intellinet 502023 Manual de usuario

Intellinet

Intellinet 524513 Manual de usuario

Intellinet

Intellinet 523530 Manual de usuario

Intellinet

Intellinet 560764 V1 Series Manual de usuario

Intellinet

Intellinet 561358 Manual de usuario

Intellinet

Intellinet 561297 Manual de usuario

Intellinet

Intellinet 561747 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario