Intamsys FUNMAT PRO Manual de usuario
1
FUNMAT PRO
Quick Start Guide
Remove The Packaging
Step1:Remove all four sides of the cardboard box, and then take out the printer and accessories trays.
Step2:Gently place the printer on a flat, solidandsturdyplatform.Connect thepowercableandpoweronyour printer.
Step3:Move up the build plate by clicking on “Axis”, selecting “XYZ” and “Move Z-Axis”.Please keep all packaging
materials for warranty purposes.
2
Step4:Open the front door and carefully remove the styrofoam box under the build plate.Then power off the
printer. Cut the fixers on top of the platform, extruder and X axis.
Set Up The Printer
Step1:Install The Glass Plate.
Step2:Click “Buildplate” and select “Load material” on the screen, then refer to the above images to ensure that the
filament is installed correctly.
.
3
Bed Leveling
Step1:
Click
“
BUILDPLATE
”
on the display
of the printer.
Step2:Have the calibration card with thickness of 0.2mm ready and start
the bed leveling process.
Step3:Turn the rotate button to raise the platform, place the leveling card between the platform and the nozzle until
you feel a little resistance when you gently sliding the card.
.
.
NOTE
:
For printing materials which heating chamber is needed, please firstly set the chamber to the printing
chamber temperature and keep itfor at least 50min before leveling. And do bed leveling at this high temperature.
Install Software
Aftersuccessfullysettinguptheprinter,locatetheSDcardandinstalltheINTAM-SUITEsoftwareonyourcomputer.It is
onlyforWindows.
Camera Guide
ToconnectthecamerapleasefollowtheCameraUsermanualinyourbox.YoucaninstalltheAppofthecameraon your
smartphoneorcomputer.
Leveling Card
4
Schematic View
01
Display Screen
02
Dial
03
SD Card Slot
04
Filament And Tool Box
05
Door Lock
06
Emergency Switch
07
Power Switch
08
Power Socket
09
Cooling Fan
10
Nozzle
11
Extruder Fan
12
Filament Tube
13
Push Button--Control The Drive Gear
14
Heating Bed
07
08
03
06
02
04
05
01
09
11
10
12
13
14
5
User Manual
You can find the softcopy of User Manual from the SD card. It is also available on our website, please download it from
below link https://www.intamsys.com/3d-printer-manuals/.
Warranty
1 year Warranty, please provide the Series No. to your local reseller for warranty.
Support
For more information or technical support please visit: www.intamsys.com/support/ (or contact nearby reseller).
Community
Welcome to join us in our community https://www.intamsys.com/forums/.
Otros manuales para FUNMAT PRO
1
Tabla de contenidos
Otros manuales de Impresora 3D de Intamsys
Intamsys
Intamsys FUNMAT HT Manual de usuario
Intamsys
Intamsys FUNMAT PRO 310 Manual de usuario
Intamsys
Intamsys Funmat Pro 410 Manual de usuario
Intamsys
Intamsys Funmat Pro 410 Manual de usuario
Intamsys
Intamsys FUNMAT HT Manual de usuario
Intamsys
Intamsys FUNMAT PRO Manual de usuario
Intamsys
Intamsys FUNMAT PRO 310 Manual de usuario
Intamsys
Intamsys Funmat Pro 410 Manual de usuario
Intamsys
Intamsys FUNMAT HT Manual de usuario
