Intamsys FUNMAT HT Manual de usuario

User Manual PN: 320-0207 REV: P02

FUNMAT HT 3D PRINTER

User Manual

High Performance Functional Materials 3DPrinter

User Manual PN: 320-0207 REV: P02

Disclaimer

Please read and understand the contents of this user manual carefully. Failure to read the manual may

result in lead to personal injury, inferior results, or damage to the machine. Always ensure that anyone who

uses the 3D Printer knows and understands the contents of this manual to make the most out of the 3D

Printer.

The conditions or methods under which the machine is assembled, handled, stored, used, or disposed of

are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume

responsibility and expressly disclaim liability for any loss, injuries, damages, or expenses arising out of or in

any way related to the assembly, handling, storage, use, or disposal of this product.

The information in this document was obtained from sources that we believe to be reliable. However, the

information is provided without any warranty, express or implied, regarding its correctness.

Intend Use

INTAMSYS 3D Printers are designed and built for fused deposition modeling of various functional plastics

such as PEEK, PEI, ABS, PC, NYLON or TPU within a commercial/business environment. The mixture of

precision and speed makes INTAMSYS 3D Printers the perfect machines for concept models, functional

prototypes, and the production of small batches. Although we achieved a very high standard reproduction

of 3D models with the usage of Intamsuite, the user remains responsible to qualify and validate the

application of the printed object for its intended use. INTAMSYS 3D Printers are open platform machines,

meaning you can use any third party filaments, but to get the best results we recommend you use

INTAMSYS certified filaments, as they are customized for made for INTAMSYS 3D Printers.

User Manual PN: 320-0207 REV: P02

CONTENTS

SAFETYAND COMPLIANCE

................................................................................................. 4

Safety....................................................................................................................................................................................... 5

Hazards................................................................................................................................................................................... 6

INTRODUCTION......................................................................................................................................7

About Intamsys..................................................................................................................................................................... 8

Contact Details..................................................................................................................................................................... 8

Printer Overview ................................................................................................................................................................. 9

Printer Specifications.................................................................................................................................................... 11

GETTINGSTARTED............................................................................................................................12

Accessories Checklist..................................................................................................................................................... 13

Unpacking The Printer......................................................................................................................................................14

Setting Up The Printer...................................................................................................................................................... 17

LCDDISPLAYOVERVIEW................................................................................................................20

REGULAROPERATION.....................................................................................................................24

Change Material..................................................................................................................................................................39

Other Functions..................................................................................................................................................................43

Change Nozzle Set

..........................................................................................................................................................47

Change Nozzle Only..........................................................................................................................................................50

Remove Print

Clean Supports

................................................................................................................................... 52

MAINTENANCE.....................................................................................................................................53

Updating Firmware............................................................................................................................................................. 54

Cleaning the Glass Plate.................................................................................................................................................... 55

Cleaning Feeder

.................................................................................................................................................................... 57

Cleaning Nozzle

................................................................................................................................................................... 58

Lubricate Axis

....................................................................................................................................................................... 59

Lubricate Guide Pin

.............................................................................................................................................................59

Filament Care

....................................................................................................................................................................... 60

TROUBLESHOOTING.........................................................................................................................61

SOFTWARE OVERVIEW....................................................................................................................68

GLOSSARY............................................................................................................................................76

SAFETY AND COMPLIANCE

It is very important to work safely with your FUNMAT HT 3D

Printer. This chapter contains details about safety and hazards.

Please read all information carefully to prevent accidents and

injuries.

SAFETY

Safety

Movement Safety

The machine is very heavy, so when unpacking the machine or moving the machine fromone location

to another, always use another person’s assistance. Additionally, keep the machine on a flat ground with

enough space on all sides to operate the machine without any difficulty.

Electrical Safety

The power supply meets all CE regulations and is protected against short-circuits, overloading, over

voltage, and overheating. Make sure you only use the power supply cable you received from INTAMSYS.

Mechanical Safety

The machine has many moving parts, but the stepper motors do not have enough power to cause serious

injuries. Still, we advise you to only reach into the machine when it is turned off.

High Temperature Safety

FUNMAT HT comes with an all-metal nozzle, high-temperature build plate, and heated chamber. When

printing functional materials with a chamber temperature of up to 90℃, the heat transmits to the outer

frame, so we advise you not to touch the machine during the printing process. The nozzle can reach

temperatures of up to 450℃, and the heat bed can reach temperatures of up to 160℃during the printing

process. Thus, we strongly advise you not to touch the nozzle & heat bed when the printer is working.

Additionally, let the printer cool down before opening the front door or the top door of the machine.

Hazards

Safety alert symbols precede each safety message in this manual. These symbols

indicate potential safety hazards that could harm you or others or cause damage to

the product or property.

Warning:

Do not leave the machine unattended during operation.

Warning:

Always power off the printer before doing any maintenance.

Warning:

Do not touch the nozzle or the heat bed when the printer is in

operation.

Warning:

After the print is done, using gloves to take out the objects.

Warning:

The machine includes moving parts that can cause injury. Never

reach inside the machine while it is in operation.

Warning:

There is a risk of electrical shock, do not touch any electrical

parts when power on.

Caution:

In case of emergency, disconnect the machine from the wall socket.

Caution:

The machine melts plastic during printing, and thus emits plastic

odors. Make sure to set up the machine in a well-ventilated area.

Please visit our website www.intamsys.com to learn more about support.

INTRODUCTION

INTAMSYS is an industrial 3D Printer manufacturer renowned

for its “world’s most affordable PEEK 3D Printer”

，

FUNMAT

HT. It has offices in Shanghai, Dongguan, and Nanjing, with

resellers present across the world.

ABOUT INTAMSYS

About Intamsys

INTAMSYS (Abbreviation of INTelligent Additive Manufacturing SYStems) is an industrial-grade 3D printers’

manufacturer specialized in high performance engineering thermoplastics 3D printing. The company was

founded by a team of engineers with in-depth experience and know-how in engineering high-precision

industrial machinery and equipment.

The company’s state-of-the-art FUNMAT 3D Printers are designed for high performance functional materials

3D printing at affordable prices. FUNMAT is the abbreviation of functional materials. INTAMSYS is committed

to the highest manufacturing design and quality standards where all INTAMSYS 3D printers have received

FCC and CE certifications. Today, INTAMSYS is trusted globally by customers from aerospace, medical,

automotive and research institutions, etc.

Please visit www.intamsys.com for more information.

Contact Details

There are multiple ways to reach out to INTAMSYS as we have a strong online presence.

E-mail: Send an e-mail to info@intamsys.com or support@intamsys.com, and we will

respond within 24 hours Phone: +86-21-5846 5932

Facebook: http://www.facebook.com/intamsys

Website: https://www.intamsys.com

Skype: intamsys

Twitter: https://twitter.com/intamsys_3d

Linked ln: https://www.linkedin.com/organization/16240248/

PRINTER OVERVIEW

Printer Overview

01.

Display Screen

02.

Push/Rotate Button

03.

SD Card Slot

04.

Filament Box

05.

Front Door Lock

Figure 2.1

06.

Power Switch

07.

Power Socket

08.

USB Socket

Figure 2.2

PRINTER OVERVIEW

09.

Cooling Fan

10.

Nozzle

11.

Auto-Level Sensor

Figure 2.3

12.

Filament Tube

13.

Push Button--Control The Drive Gear

Figure 2.4

14.

Heating Bed (Under the Glass)

15.

Glass Plate

16.

Glass Holder

Figure 2.5

Otros manuales para FUNMAT HT

Tabla de contenidos

Otros manuales de Impresora 3D de Intamsys

Intamsys

Intamsys FUNMAT HT Manual de usuario

Intamsys

Intamsys FUNMAT PRO Manual de usuario

Intamsys

Intamsys FUNMAT PRO Manual de usuario

Intamsys

Intamsys Funmat Pro 410 Manual de usuario

Intamsys

Intamsys Funmat Pro 410 Manual de usuario

Intamsys

Intamsys FUNMAT HT Manual de usuario

Intamsys

Intamsys Funmat Pro 410 Manual de usuario

Intamsys

Intamsys FUNMAT PRO 310 Manual de usuario

Intamsys

Intamsys FUNMAT PRO 310 Manual de usuario

Manuales populares de Impresora 3D de otras marcas

Ultimaker

Ultimaker S5 Material Station Manual de usuario

EcubMaker

EcubMaker TOYDIY Manual de usuario

AnyCubic

AnyCubic Kossel Plus Manual de usuario

ReDeTec

ReDeTec ProtoCycler Manual de usuario

Kywoo3D

Kywoo3D Tycoon IDEX Manual de usuario

CraftBot

CraftBot PLUS PRO Manual de usuario

3DGence

3DGence INDUSTRY F340 Manual de usuario

HP Jet Fusion 4200 Instrucciones de funcionamiento

Rokit

Rokit AEP Series Manual de usuario

AnkerMake

AnkerMake M5 Manual de usuario

DIYElectronics

DIYElectronics PRUSA I3 Instrucciones de montaje

Ackuretta

Ackuretta FreeShape 120 Manual de usuario

LONGER

LONGER LK5Pro Manual de usuario

Stratasys

Stratasys J850 Manual de usuario

MakerBot

MakerBot Replicator Manual de usuario

Stratasys

Stratasys FDM Vantage Series Manual de usuario

ZYYX

ZYYX Pro II Manual de usuario

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guía del usuario